From patchwork Sun Jul 17 06:36:11 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Reizer, Eyal" X-Patchwork-Id: 9233597 X-Patchwork-Delegate: kvalo@adurom.com Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 33688607FF for ; Sun, 17 Jul 2016 06:36:50 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 23BCB205A8 for ; Sun, 17 Jul 2016 06:36:50 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 17F9325749; Sun, 17 Jul 2016 06:36:50 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E44EC206AF for ; Sun, 17 Jul 2016 06:36:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752021AbcGQGgX (ORCPT ); Sun, 17 Jul 2016 02:36:23 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:54666 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750892AbcGQGgV convert rfc822-to-8bit (ORCPT ); Sun, 17 Jul 2016 02:36:21 -0400 Received: from dlelxv90.itg.ti.com ([172.17.2.17]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id u6H6XoHY019764; Sun, 17 Jul 2016 01:33:50 -0500 Received: from DFRE70.ent.ti.com (dncmailx.itg.ti.com [10.167.188.34]) by dlelxv90.itg.ti.com (8.14.3/8.13.8) with ESMTP id u6H6aES8012286; Sun, 17 Jul 2016 01:36:15 -0500 Received: from DFRE01.ent.ti.com ([fe80::b027:5293:c8d8:d82a]) by DFRE70.ent.ti.com ([fe80::645e:109b:13d3:dfa7%25]) with mapi id 14.03.0294.000; Sun, 17 Jul 2016 08:36:11 +0200 From: "Reizer, Eyal" To: Kalle Valo , Rob Herring CC: "linux-wireless@vger.kernel.org" , "netdev@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-spi@vger.kernel.org" Subject: [PATCH v5] wlcore: spi: add wl18xx support Thread-Topic: [PATCH v5] wlcore: spi: add wl18xx support Thread-Index: AQHR2oWev/O/3FUVIEaHTmFzskwfsqAcMvjw Date: Sun, 17 Jul 2016 06:36:11 +0000 Message-ID: <8665E2433BC68541A24DFFCA87B70F5B3615D8AA@DFRE01.ent.ti.com> References: <8665E2433BC68541A24DFFCA87B70F5B36156367@DFRE01.ent.ti.com> In-Reply-To: <8665E2433BC68541A24DFFCA87B70F5B36156367@DFRE01.ent.ti.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.167.188.42] x-exclaimer-md-config: f9c360f5-3d1e-4c3c-8703-f45bf52eff6b MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the init stage. Signed-off-by: Eyal Reizer Acked-by: Rob Herring --- v1->v2:update device tree bindings configuration v2->v3:revert from manual gpio manipulation. use inverted chip select instead for sending the extra init cycle which, achieves the same hardware purpose. update device tree bindings docucmentation accordingly v3->v4: Remove redundant data form binding documentation and fix chip select number mismatch in wl1271 example v4->v5: Rebase on top of head of wireless-drivers-next .../bindings/net/wireless/ti,wlcore,spi.txt | 41 +++++-- drivers/net/wireless/ti/wlcore/spi.c | 123 ++++++++++++++++++--- 2 files changed, 137 insertions(+), 27 deletions(-) struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); struct spi_transfer t; struct spi_message m; + struct spi_device *spi = to_spi_device(glue->dev); u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); if (!cmd) { @@ -151,6 +166,7 @@ static void wl12xx_spi_init(struct device *child) cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY; cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; + /* * The above is the logical order; it must actually be stored * in the buffer byte-swapped. @@ -163,6 +179,28 @@ static void wl12xx_spi_init(struct device *child) spi_message_add_tail(&t, &m); spi_sync(to_spi_device(glue->dev), &m); + + /* Send extra clocks with inverted CS (high). this is required + * by the wilink family in order to successfully enter WSPI mode. + */ + spi->mode ^= SPI_CS_HIGH; + memset(&m, 0, sizeof(m)); + spi_message_init(&m); + + cmd[0] = 0xff; + cmd[1] = 0xff; + cmd[2] = 0xff; + cmd[3] = 0xff; + __swab32s((u32 *)cmd); + + t.tx_buf = cmd; + t.len = 4; + spi_message_add_tail(&t, &m); + + spi_sync(to_spi_device(glue->dev), &m); + + /* Restore chip select configration to normal */ + spi->mode ^= SPI_CS_HIGH; kfree(cmd); } @@ -270,22 +308,25 @@ static int __must_check wl12xx_spi_raw_read(struct device *child, int addr, return 0; } -static int __must_check wl12xx_spi_raw_write(struct device *child, int addr, - void *buf, size_t len, bool fixed) +static int __wl12xx_spi_raw_write(struct device *child, int addr, + void *buf, size_t len, bool fixed) { struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); - /* SPI write buffers - 2 for each chunk */ - struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS]; + struct spi_transfer *t; struct spi_message m; u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; /* 1 command per chunk */ u32 *cmd; u32 chunk_len; int i; + /* SPI write buffers - 2 for each chunk */ + t = kzalloc(sizeof(*t) * 2 * WSPI_MAX_NUM_OF_CHUNKS, GFP_KERNEL); + if (!t) + return -ENOMEM; + WARN_ON(len > SPI_AGGR_BUFFER_SIZE); spi_message_init(&m); - memset(t, 0, sizeof(t)); cmd = &commands[0]; i = 0; @@ -318,9 +359,26 @@ static int __must_check wl12xx_spi_raw_write(struct device *child, int addr, spi_sync(to_spi_device(glue->dev), &m); + kfree(t); return 0; } +static int __must_check wl12xx_spi_raw_write(struct device *child, int addr, + void *buf, size_t len, bool +fixed) { + int ret; + + /* The ELP wakeup write may fail the first time due to internal + * hardware latency. It is safer to send the wakeup command twice to + * avoid unexpected failures. + */ + if (addr == HW_ACCESS_ELP_CTRL_REG) + ret = __wl12xx_spi_raw_write(child, addr, buf, len, fixed); + ret = __wl12xx_spi_raw_write(child, addr, buf, len, fixed); + + return ret; +} + /** * wl12xx_spi_set_power - power on/off the wl12xx unit * @child: wl12xx device handle. @@ -349,17 +407,38 @@ static int wl12xx_spi_set_power(struct device *child, bool enable) return ret; } +/** + * wl12xx_spi_set_block_size + * + * This function is not needed for spi mode, but need to be present. + * Without it defined the wlcore fallback to use the wrong packet + * allignment on tx. + */ +static void wl12xx_spi_set_block_size(struct device *child, + unsigned int blksz) { } + static struct wl1271_if_operations spi_ops = { .read = wl12xx_spi_raw_read, .write = wl12xx_spi_raw_write, .reset = wl12xx_spi_reset, .init = wl12xx_spi_init, .power = wl12xx_spi_set_power, - .set_block_size = NULL, + .set_block_size = wl12xx_spi_set_block_size, }; static const struct of_device_id wlcore_spi_of_match_table[] = { - { .compatible = "ti,wl1271" }, + { .compatible = "ti,wl1271", .data = &wl12xx_data}, + { .compatible = "ti,wl1273", .data = &wl12xx_data}, + { .compatible = "ti,wl1281", .data = &wl12xx_data}, + { .compatible = "ti,wl1283", .data = &wl12xx_data}, + { .compatible = "ti,wl1801", .data = &wl18xx_data}, + { .compatible = "ti,wl1805", .data = &wl18xx_data}, + { .compatible = "ti,wl1807", .data = &wl18xx_data}, + { .compatible = "ti,wl1831", .data = &wl18xx_data}, + { .compatible = "ti,wl1835", .data = &wl18xx_data}, + { .compatible = "ti,wl1837", .data = &wl18xx_data}, { } }; MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table); @@ -376,17 +455,24 @@ static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue, { struct device_node *dt_node = spi->dev.of_node; int ret; + const struct of_device_id *of_id; + + of_id = of_match_node(wlcore_spi_of_match_table, dt_node); + if (!of_id) + return -ENODEV; + + wilink_data = of_id->data; + dev_info(&spi->dev, "selected chip familiy is %s\n", + wilink_data->name); if (of_find_property(dt_node, "clock-xtal", NULL)) pdev_data->ref_clock_xtal = true; - ret = of_property_read_u32(dt_node, "ref-clock-frequency", - &pdev_data->ref_clock_freq); - if (ret) { - dev_err(glue->dev, - "can't get reference clock frequency (%d)\n", ret); - return ret; - } + /* optional clock frequency params */ + of_property_read_u32(dt_node, "ref-clock-frequency", + &pdev_data->ref_clock_freq); + of_property_read_u32(dt_node, "tcxo-clock-frequency", + &pdev_data->tcxo_clock_freq); return 0; } @@ -437,7 +523,8 @@ static int wl1271_probe(struct spi_device *spi) return ret; } - glue->core = platform_device_alloc("wl12xx", PLATFORM_DEVID_AUTO); + glue->core = platform_device_alloc(wilink_data->name, + PLATFORM_DEVID_AUTO); if (!glue->core) { dev_err(glue->dev, "can't allocate platform_device\n"); return -ENOMEM; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt index 9180724..8f9ced0 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt @@ -1,19 +1,30 @@ -* Texas Instruments wl1271 wireless lan controller +* Texas Instruments wl12xx/wl18xx wireless lan controller -The wl1271 chip can be connected via SPI or via SDIO. This +The wl12xx/wl18xx chips can be connected via SPI or via SDIO. This document describes the binding for the SPI connected chip. Required properties: -- compatible : Should be "ti,wl1271" +- compatible : Should be one of the following: + * "ti,wl1271" + * "ti,wl1273" + * "ti,wl1281" + * "ti,wl1283" + * "ti,wl1801" + * "ti,wl1805" + * "ti,wl1807" + * "ti,wl1831" + * "ti,wl1835" + * "ti,wl1837" - reg : Chip select address of device - spi-max-frequency : Maximum SPI clocking speed of device in Hz -- ref-clock-frequency : Reference clock frequency - interrupt-parent, interrupts : Should contain parameters for 1 interrupt line. Interrupt parameters: parent, line number, type. -- vwlan-supply : Point the node of the regulator that powers/enable the wl1271 chip +- vwlan-supply : Point the node of the regulator that powers/enable the + wl12xx/wl18xx chip Optional properties: +- ref-clock-frequency : Reference clock frequency (should be set for +wl12xx) - clock-xtal : boolean, clock is generated from XTAL - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt @@ -21,16 +32,28 @@ Optional properties: Examples: +For wl12xx family: &spi1 { - wl1271@1 { + wlcore: wlcore@1 { compatible = "ti,wl1271"; - reg = <1>; spi-max-frequency = <48000000>; - clock-xtal; - ref-clock-frequency = <38400000>; interrupt-parent = <&gpio3>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; vwlan-supply = <&vwlan_fixed>; + clock-xtal; + ref-clock-frequency = <38400000>; + }; +}; + +For wl18xx family: +&spi0 { + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <0>; + spi-max-frequency = <48000000>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_EDGE_RISING>; + vwlan-supply = <&vwlan_fixed>; }; }; diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index cea9443..73fbcf1 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -70,16 +70,30 @@ #define WSPI_MAX_CHUNK_SIZE 4092 /* - * only support SPI for 12xx - this code should be reworked when 18xx - * support is introduced + * wl18xx driver aggregation buffer size is (13 * PAGE_SIZE) compared + to + * (4 * PAGE_SIZE) for wl12xx, so use the larger buffer needed for + wl18xx */ -#define SPI_AGGR_BUFFER_SIZE (4 * PAGE_SIZE) +#define SPI_AGGR_BUFFER_SIZE (13 * PAGE_SIZE) /* Maximum number of SPI write chunks */ #define WSPI_MAX_NUM_OF_CHUNKS \ ((SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + 1) +struct wilink_familiy_data { + char name[8]; +}; + +const struct wilink_familiy_data *wilink_data; + +static const struct wilink_familiy_data wl18xx_data = { + .name = "wl18xx", +}; + +static const struct wilink_familiy_data wl12xx_data = { + .name = "wl12xx", +}; + struct wl12xx_spi_glue { struct device *dev; struct platform_device *core; @@ -119,6 +133,7 @@ static void wl12xx_spi_init(struct device *child)