diff mbox

[v6,2/6] 6lowpan: Set MAC address length according to LOWPAN_LLTYPE

Message ID 20170302132335.21192-3-luiz.dentz@gmail.com (mailing list archive)
State Superseded
Headers show

Commit Message

Luiz Augusto von Dentz March 2, 2017, 1:23 p.m. UTC 
From: Patrik Flykt <patrik.flykt@linux.intel.com>

Set MAC address length according to the 6LoWPAN link layer in use.
Bluetooth Low Energy uses 48 bit addressing while IEEE802.15.4 uses
64 bits.

Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
---
 net/6lowpan/core.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/net/6lowpan/core.c b/net/6lowpan/core.c
index 5945f7e..5f9909a 100644
--- a/net/6lowpan/core.c
+++ b/net/6lowpan/core.c
@@ -23,7 +23,16 @@  int lowpan_register_netdevice(struct net_device *dev,
 {
 	int i, ret;
 
-	dev->addr_len = EUI64_ADDR_LEN;
+	switch (lltype) {
+	case LOWPAN_LLTYPE_IEEE802154:
+		dev->addr_len = EUI64_ADDR_LEN;
+		break;
+
+	case LOWPAN_LLTYPE_BTLE:
+		dev->addr_len = ETH_ALEN;
+		break;
+	}
+
 	dev->type = ARPHRD_6LOWPAN;
 	dev->mtu = IPV6_MIN_MTU;
 	dev->priv_flags |= IFF_NO_QUEUE;