diff mbox series

[net-next] ieee802154: hwsim: fix rcu handling

Message ID 20180807233249.28572-1-aring@mojatatu.com (mailing list archive)
State Accepted
Headers show
Series [net-next] ieee802154: hwsim: fix rcu handling | expand

Commit Message

Alexander Aring Aug. 7, 2018, 11:32 p.m. UTC
This patch adds missing rcu_assign_pointer()/rcu_dereference() to used rcu
pointers. There was already a previous commit c5d99d2b35da ("ieee802154:
hwsim: fix rcu address annotation"), but there was more which was
pointed out on my side by using newest sparse version.

Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Alexander Aring <aring@mojatatu.com>
---
After I installed finally the newest sparse version I found more what kbuild
was pointed out.

I hope I did it right, not sure if I really need rcu functionality in these
case because protection by mutex but I make sparse silent.
At some places the resource isn't a shared resource at this moment.

Anyway in my case I want to use this driver to create easily multi-hop
scenarios, if somebody report things (or I hit it) which smells like some
memory in this area - I will try and help to fix it.

Newest sparse version from git is happy now and I hope kbuild bot as well.

I tested this patch with RPOVE_RCU enabled and tried to update these settings
while heavy loading in rcu protected xmit hotpath is occured, without any
issues so far.

Sorry again.

 drivers/net/ieee802154/mac802154_hwsim.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

Comments

Stefan Schmidt Aug. 8, 2018, 8:05 p.m. UTC | #1
Hello David.

I want to apologize how the submission of the ieee802154_hwsim driver
worked out. The sparse warning finally fixed by this commit came due to
an outdated sparse used on our side while kbuild was up to date. I fixed
this now and sparse has no warnings for the ieee802154_hwsim driver
anymore with this patch applied.

The other two fixes from Wei Yongjun are problems I should have spotted
during code review, but did not. No excuse, I just overlooked them.

I would, once again, ask you to apply these three directly to net-next.
I you would prefer for me to pick them up and send you a pull request
this time just let me know and I will do so tomorrow.

On 08/08/2018 01:32 AM, Alexander Aring wrote:
> This patch adds missing rcu_assign_pointer()/rcu_dereference() to used rcu
> pointers. There was already a previous commit c5d99d2b35da ("ieee802154:
> hwsim: fix rcu address annotation"), but there was more which was
> pointed out on my side by using newest sparse version.
> 
> Cc: Stefan Schmidt <stefan@datenfreihafen.org>
> Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
> Signed-off-by: Alexander Aring <aring@mojatatu.com>
> ---
> After I installed finally the newest sparse version I found more what kbuild
> was pointed out.
> 
> I hope I did it right, not sure if I really need rcu functionality in these
> case because protection by mutex but I make sparse silent.
> At some places the resource isn't a shared resource at this moment.
> 
> Anyway in my case I want to use this driver to create easily multi-hop
> scenarios, if somebody report things (or I hit it) which smells like some
> memory in this area - I will try and help to fix it.
> 
> Newest sparse version from git is happy now and I hope kbuild bot as well.
> 
> I tested this patch with RPOVE_RCU enabled and tried to update these settings
> while heavy loading in rcu protected xmit hotpath is occured, without any
> issues so far.
> 
> Sorry again.
> 
>  drivers/net/ieee802154/mac802154_hwsim.c | 24 +++++++++++++++++++-----
>  1 file changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ieee802154/mac802154_hwsim.c b/drivers/net/ieee802154/mac802154_hwsim.c
> index f4e92054f7df..53f39435321e 100644
> --- a/drivers/net/ieee802154/mac802154_hwsim.c
> +++ b/drivers/net/ieee802154/mac802154_hwsim.c
> @@ -22,6 +22,7 @@
>  #include <linux/module.h>
>  #include <linux/timer.h>
>  #include <linux/platform_device.h>
> +#include <linux/rtnetlink.h>
>  #include <linux/netdevice.h>
>  #include <linux/device.h>
>  #include <linux/spinlock.h>
> @@ -110,7 +111,7 @@ static int hwsim_hw_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
>  	pib->page = page;
>  	pib->channel = channel;
>  
> -	pib_old = phy->pib;
> +	pib_old = rtnl_dereference(phy->pib);
>  	rcu_assign_pointer(phy->pib, pib);
>  	kfree_rcu(pib_old, rcu);
>  	return 0;
> @@ -406,7 +407,7 @@ static struct hwsim_edge *hwsim_alloc_edge(struct hwsim_phy *endpoint, u8 lqi)
>  	}
>  
>  	einfo->lqi = 0xff;
> -	e->info = einfo;
> +	rcu_assign_pointer(e->info, einfo);
>  	e->endpoint = endpoint;
>  
>  	return e;
> @@ -414,7 +415,13 @@ static struct hwsim_edge *hwsim_alloc_edge(struct hwsim_phy *endpoint, u8 lqi)
>  
>  static void hwsim_free_edge(struct hwsim_edge *e)
>  {
> -	kfree_rcu(e->info, rcu);
> +	struct hwsim_edge_info *einfo;
> +
> +	rcu_read_lock();
> +	einfo = rcu_dereference(e->info);
> +	rcu_read_unlock();
> +
> +	kfree_rcu(einfo, rcu);
>  	kfree_rcu(e, rcu);
>  }
>  
> @@ -796,7 +803,7 @@ static int hwsim_add_one(struct genl_info *info, struct device *dev,
>  		goto err_pib;
>  	}
>  
> -	phy->pib = pib;
> +	rcu_assign_pointer(phy->pib, pib);
>  	phy->idx = idx;
>  	INIT_LIST_HEAD(&phy->edges);
>  
> @@ -829,10 +836,17 @@ static int hwsim_add_one(struct genl_info *info, struct device *dev,
>  
>  static void hwsim_del(struct hwsim_phy *phy)
>  {
> +	struct hwsim_pib *pib;
> +
>  	hwsim_edge_unsubscribe_me(phy);
>  
>  	list_del(&phy->list);
> -	kfree_rcu(phy->pib, rcu);
> +
> +	rcu_read_lock();
> +	pib = rcu_dereference(phy->pib);
> +	rcu_read_unlock();
> +
> +	kfree_rcu(pib, rcu);
>  
>  	ieee802154_unregister_hw(phy->hw);
>  	ieee802154_free_hw(phy->hw);
> 

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

regards
Stefan Schmidt
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
David Miller Aug. 9, 2018, 1:37 a.m. UTC | #2
From: Stefan Schmidt <stefan@datenfreihafen.org>
Date: Wed, 8 Aug 2018 22:05:54 +0200

> I would, once again, ask you to apply these three directly to
> net-next.

Ok, done.
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/net/ieee802154/mac802154_hwsim.c b/drivers/net/ieee802154/mac802154_hwsim.c
index f4e92054f7df..53f39435321e 100644
--- a/drivers/net/ieee802154/mac802154_hwsim.c
+++ b/drivers/net/ieee802154/mac802154_hwsim.c
@@ -22,6 +22,7 @@ 
 #include <linux/module.h>
 #include <linux/timer.h>
 #include <linux/platform_device.h>
+#include <linux/rtnetlink.h>
 #include <linux/netdevice.h>
 #include <linux/device.h>
 #include <linux/spinlock.h>
@@ -110,7 +111,7 @@  static int hwsim_hw_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
 	pib->page = page;
 	pib->channel = channel;
 
-	pib_old = phy->pib;
+	pib_old = rtnl_dereference(phy->pib);
 	rcu_assign_pointer(phy->pib, pib);
 	kfree_rcu(pib_old, rcu);
 	return 0;
@@ -406,7 +407,7 @@  static struct hwsim_edge *hwsim_alloc_edge(struct hwsim_phy *endpoint, u8 lqi)
 	}
 
 	einfo->lqi = 0xff;
-	e->info = einfo;
+	rcu_assign_pointer(e->info, einfo);
 	e->endpoint = endpoint;
 
 	return e;
@@ -414,7 +415,13 @@  static struct hwsim_edge *hwsim_alloc_edge(struct hwsim_phy *endpoint, u8 lqi)
 
 static void hwsim_free_edge(struct hwsim_edge *e)
 {
-	kfree_rcu(e->info, rcu);
+	struct hwsim_edge_info *einfo;
+
+	rcu_read_lock();
+	einfo = rcu_dereference(e->info);
+	rcu_read_unlock();
+
+	kfree_rcu(einfo, rcu);
 	kfree_rcu(e, rcu);
 }
 
@@ -796,7 +803,7 @@  static int hwsim_add_one(struct genl_info *info, struct device *dev,
 		goto err_pib;
 	}
 
-	phy->pib = pib;
+	rcu_assign_pointer(phy->pib, pib);
 	phy->idx = idx;
 	INIT_LIST_HEAD(&phy->edges);
 
@@ -829,10 +836,17 @@  static int hwsim_add_one(struct genl_info *info, struct device *dev,
 
 static void hwsim_del(struct hwsim_phy *phy)
 {
+	struct hwsim_pib *pib;
+
 	hwsim_edge_unsubscribe_me(phy);
 
 	list_del(&phy->list);
-	kfree_rcu(phy->pib, rcu);
+
+	rcu_read_lock();
+	pib = rcu_dereference(phy->pib);
+	rcu_read_unlock();
+
+	kfree_rcu(pib, rcu);
 
 	ieee802154_unregister_hw(phy->hw);
 	ieee802154_free_hw(phy->hw);