diff mbox series

[2/7] net: enetc: Use IRQF_NO_AUTOEN flag in request_irq()

Message ID 20240909133034.1296930-3-ruanjinjie@huawei.com (mailing list archive)
State Superseded
Headers show
Series net: Use IRQF_NO_AUTOEN flag in request_irq() | expand

Commit Message

Jinjie Ruan Sept. 9, 2024, 1:30 p.m. UTC 
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.

Fixes: bbb96dc7fa1a ("enetc: Factor out the traffic start/stop procedures")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
---
 drivers/net/ethernet/freescale/enetc/enetc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 5c45f42232d3..f04f42ea60c0 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -2305,12 +2305,11 @@  static int enetc_setup_irqs(struct enetc_ndev_priv *priv)
 
 		snprintf(v->name, sizeof(v->name), "%s-rxtx%d",
 			 priv->ndev->name, i);
-		err = request_irq(irq, enetc_msix, 0, v->name, v);
+		err = request_irq(irq, enetc_msix, IRQF_NO_AUTOEN, v->name, v);
 		if (err) {
 			dev_err(priv->dev, "request_irq() failed!\n");
 			goto irq_err;
 		}
-		disable_irq(irq);
 
 		v->tbier_base = hw->reg + ENETC_BDR(TX, 0, ENETC_TBIER);
 		v->rbier = hw->reg + ENETC_BDR(RX, i, ENETC_RBIER);