diff mbox

[ltsi-3.10,478/595,media] ARM: shmobile: BOCK-W: add VIN and ML86V7667 support

Message ID 1384917713-15962-479-git-send-email-horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Horman Nov. 20, 2013, 3:19 a.m. UTC
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>

Add ML86V7667 platform devices on BOCK-W board, configure VIN0/1 pins, and
register VIN0/1 devices with the ML86V7667 specific platform data.
[Sergei: some macro/comment cleanup; updated the copyrights, removed duplicate
'sh_eth' driver being enabled before registering VIN1 due to a pin conflict,
removed superfluous semicolon after iclink[01]_ml86v7667' initializer.]

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
(cherry picked from commit 9c43952d0f1e7da943cb697f902e5a0e62abfc63)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Conflicts:
	arch/arm/mach-shmobile/board-bockw.c
---
 arch/arm/mach-shmobile/board-bockw.c | 41 ++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 255e97e..127ad3a 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -3,6 +3,7 @@ 
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -31,6 +32,7 @@ 
 #include <linux/smsc911x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <media/soc_camera.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
@@ -161,6 +163,25 @@  static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
 			  MMC_CAP_NEEDS_POLL,
 };
 
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+	.flags	= RCAR_VIN_BT656,
+};
+
+/* In the default configuration both decoders reside on I2C bus 0 */
+#define BOCKW_CAMERA(idx)						\
+static struct i2c_board_info camera##idx##_info = {			\
+	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
+};									\
+									\
+static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
+	.bus_id		= idx,						\
+	.i2c_adapter_id	= 0,						\
+	.board_info	= &camera##idx##_info,				\
+}
+
+BOCKW_CAMERA(0);
+BOCKW_CAMERA(1);
+
 static const struct pinctrl_map bockw_pinctrl_map[] = {
 	/* Ether */
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
@@ -192,6 +213,16 @@  static const struct pinctrl_map bockw_pinctrl_map[] = {
 				  "sdhi0_cd", "sdhi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
 				  "sdhi0_wp", "sdhi0"),
+	/* VIN0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
+				  "vin0_clk", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
+				  "vin0_data8", "vin0"),
+	/* VIN1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
+				  "vin1_clk", "vin1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
+				  "vin1_data8", "vin1"),
 };
 
 #define FPGA	0x18200000
@@ -206,6 +237,16 @@  static void __init bockw_init(void)
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
 	r8a7778_add_ether_device(&ether_platform_data);
+	r8a7778_add_vin_device(0, &vin_platform_data);
+	/* VIN1 has a pin conflict with Ether */
+	if (!IS_ENABLED(CONFIG_SH_ETH))
+		r8a7778_add_vin_device(1, &vin_platform_data);
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
+				      &iclink0_ml86v7667,
+				      sizeof(iclink0_ml86v7667));
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
+				      &iclink1_ml86v7667,
+				      sizeof(iclink1_ml86v7667));
 
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));