diff mbox

[LTSI-3.14,577/894] clocksource: sh_tmu: Use request_irq() instead of setup_irq()

Message ID 1409209620-24487-578-git-send-email-horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Horman Aug. 28, 2014, 7:01 a.m. UTC
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The driver claims it needs to register an interrupt handler too early
for request_irq(). This might have been true in the past, but the only
meaningful difference between request_irq() and setup_irq() today is an
additional kzalloc() call in request_irq(). As the driver calls
kmalloc() itself we know that the slab allocator is available, we can
thus switch to request_irq().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
(cherry picked from commit 1c56cf6b048e1e1bbe08faf38b5592b373905ac5)
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/clocksource/sh_tmu.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)
diff mbox

Patch

diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index ecd7b60..8613cc9 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -38,7 +38,7 @@ 
 struct sh_tmu_priv {
 	void __iomem *mapbase;
 	struct clk *clk;
-	struct irqaction irqaction;
+	int irq;
 	struct platform_device *pdev;
 	unsigned long rate;
 	unsigned long periodic;
@@ -401,10 +401,11 @@  static void sh_tmu_register_clockevent(struct sh_tmu_priv *p,
 
 	clockevents_config_and_register(ced, 1, 0x300, 0xffffffff);
 
-	ret = setup_irq(p->irqaction.irq, &p->irqaction);
+	ret = request_irq(p->irq, sh_tmu_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+			  dev_name(&p->pdev->dev), p);
 	if (ret) {
-		dev_err(&p->pdev->dev, "failed to request irq %d\n",
-			p->irqaction.irq);
+		dev_err(&p->pdev->dev, "failed to request irq %d\n", p->irq);
 		return;
 	}
 }
@@ -425,7 +426,7 @@  static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
 {
 	struct sh_timer_config *cfg = pdev->dev.platform_data;
 	struct resource *res;
-	int irq, ret;
+	int ret;
 	ret = -ENXIO;
 
 	memset(p, 0, sizeof(*p));
@@ -444,8 +445,8 @@  static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
 		goto err0;
 	}
 
-	irq = platform_get_irq(p->pdev, 0);
-	if (irq < 0) {
+	p->irq = platform_get_irq(p->pdev, 0);
+	if (p->irq < 0) {
 		dev_err(&p->pdev->dev, "failed to get irq\n");
 		goto err0;
 	}
@@ -457,13 +458,6 @@  static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
 		goto err0;
 	}
 
-	/* setup data for setup_irq() (too early for request_irq()) */
-	p->irqaction.name = dev_name(&p->pdev->dev);
-	p->irqaction.handler = sh_tmu_interrupt;
-	p->irqaction.dev_id = p;
-	p->irqaction.irq = irq;
-	p->irqaction.flags = IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING;
-
 	/* get hold of clock */
 	p->clk = clk_get(&p->pdev->dev, "tmu_fck");
 	if (IS_ERR(p->clk)) {