@@ -2646,4 +2646,33 @@ timespec_to_jiffies_timeout(const struct timespec *value)
return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1);
}
+/*
+ * If you need to wait X milliseconds between events A and B, but event B
+ * doesn't happen exactly after event A, you record the timestamp (jiffies) of
+ * when event A happened, then just before event B you call this function and
+ * pass the timestamp as the first argument, and X as the second argument.
+ */
+static inline void
+wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms)
+{
+ unsigned long target_jiffies, tmp_jiffies;
+ unsigned int remaining_ms;
+
+ /*
+ * Don't re-read the value of "jiffies" every time since it may change
+ * behind our back and break the math.
+ */
+ tmp_jiffies = jiffies;
+ target_jiffies = timestamp_jiffies +
+ msecs_to_jiffies_timeout(to_wait_ms);
+
+ if (time_after(target_jiffies, tmp_jiffies)) {
+ remaining_ms = jiffies_to_msecs((long)target_jiffies -
+ (long)tmp_jiffies);
+ while (remaining_ms)
+ remaining_ms =
+ schedule_timeout_uninterruptible(remaining_ms);
+ }
+}
+
#endif
@@ -1064,9 +1064,26 @@ static void ironlake_wait_panel_off(struct intel_dp *intel_dp)
static void ironlake_wait_panel_power_cycle(struct intel_dp *intel_dp)
{
DRM_DEBUG_KMS("Wait for panel power cycle\n");
+
+ /* When we disable the VDD override bit last we have to do the manual
+ * wait. */
+ wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle,
+ intel_dp->panel_power_cycle_delay);
+
ironlake_wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
}
+static void ironlake_wait_backlight_on(struct intel_dp *intel_dp)
+{
+ wait_remaining_ms_from_jiffies(intel_dp->last_power_on,
+ intel_dp->backlight_on_delay);
+}
+
+static void ironlake_edp_wait_backlight_off(struct intel_dp *intel_dp)
+{
+ wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off,
+ intel_dp->backlight_off_delay);
+}
/* Read the current pp_control value, unlocking the register if it
* is locked
@@ -1154,7 +1171,7 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
if ((pp & POWER_TARGET_ON) == 0)
- msleep(intel_dp->panel_power_cycle_delay);
+ intel_dp->last_power_cycle = jiffies;
intel_runtime_pm_put(dev_priv);
}
@@ -1229,6 +1246,7 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
POSTING_READ(pp_ctrl_reg);
ironlake_wait_panel_on(intel_dp);
+ intel_dp->last_power_on = jiffies;
if (IS_GEN5(dev)) {
pp |= PANEL_POWER_RESET; /* restore panel reset bit */
@@ -1249,6 +1267,8 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
DRM_DEBUG_KMS("Turn eDP power off\n");
+ ironlake_edp_wait_backlight_off(intel_dp);
+
WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
pp = ironlake_get_pp_control(intel_dp);
@@ -1261,6 +1281,7 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
+ intel_dp->last_power_cycle = jiffies;
intel_dp->want_panel_vdd = false;
ironlake_wait_panel_off(intel_dp);
@@ -1287,7 +1308,7 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
* link. So delay a bit to make sure the image is solid before
* allowing it to appear.
*/
- msleep(intel_dp->backlight_on_delay);
+ ironlake_wait_backlight_on(intel_dp);
pp = ironlake_get_pp_control(intel_dp);
pp |= EDP_BLC_ENABLE;
@@ -1319,7 +1340,7 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
- msleep(intel_dp->backlight_off_delay);
+ intel_dp->last_backlight_off = jiffies;
}
static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
@@ -487,6 +487,9 @@ struct intel_dp {
int backlight_off_delay;
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
+ unsigned long last_power_cycle;
+ unsigned long last_power_on;
+ unsigned long last_backlight_off;
bool psr_setup_done;
struct intel_connector *attached_connector;
};