@@ -1155,6 +1155,12 @@ struct intel_vbt_data {
/* MIPI DSI */
struct {
u16 panel_id;
+ struct mipi_config *config;
+ struct mipi_pps_data *pps;
+ u8 seq_version;
+ u32 size;
+ u8 *data;
+ u8 *sequence[MIPI_SEQ_MAX];
} dsi;
int crt_ddc_pin;
@@ -660,19 +660,213 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
}
}
+static u8 *goto_next_sequence(u8 *data, int *size)
+{
+ u16 len;
+ int tmp = *size;
+
+ if (--tmp < 0)
+ return NULL;
+
+ /* goto first element */
+ data++;
+ while (1) {
+ switch (*data) {
+ case MIPI_SEQ_ELEM_SEND_PKT:
+ /*
+ * skip by this element payload size
+ * skip elem id, command flag and data type
+ */
+ if ((tmp = tmp - 5) < 0)
+ return NULL;
+
+ data += 3;
+ len = *((u16 *)data);
+
+ if ((tmp = tmp - len) < 0)
+ return NULL;
+
+ /* skip by len */
+ data = data + 2 + len;
+ break;
+ case MIPI_SEQ_ELEM_DELAY:
+ /* skip by elem id, and delay is 4 bytes */
+ if ((tmp = tmp - 5) < 0)
+ return NULL;
+
+ data += 5;
+ break;
+ case MIPI_SEQ_ELEM_GPIO:
+ if ((tmp = tmp - 3) < 0)
+ return NULL;
+
+ data += 3;
+ break;
+ default:
+ DRM_ERROR("Unknown element\n");
+ return NULL;
+ }
+
+ /* end of sequence ? */
+ if (*data == 0)
+ break;
+ }
+
+ /* goto next sequence or end of block byte */
+ if (--tmp < 0)
+ return NULL;
+
+ data++;
+
+ /* update amount of data left for the sequence block to be parsed */
+ *size = tmp;
+ return data;
+}
+
static void
parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
{
- struct bdb_mipi *mipi;
+ struct bdb_mipi_config *start;
+ struct bdb_mipi_sequence *sequence;
+ struct mipi_config *config;
+ struct mipi_pps_data *pps;
+ u8 *data, *seq_data;
+ int i, panel_id, seq_size;
+ u16 block_size;
+
+ /* Initialize this to undefined indicating no generic MIPI support */
+ dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID;
+
+ /* Block #40 is already parsed and panel_fixed_mode is
+ * stored in dev_priv->lfp_lvds_vbt_mode
+ * resuse this when needed
+ */
- mipi = find_section(bdb, BDB_MIPI_CONFIG);
- if (!mipi) {
- DRM_DEBUG_KMS("No MIPI BDB found");
+ /* Parse #52 for panel index used from panel_type already
+ * parsed
+ */
+ start = find_section(bdb, BDB_MIPI_CONFIG);
+ if (!start) {
+ DRM_DEBUG_KMS("No MIPI config BDB found");
return;
}
- /* XXX: add more info */
+ DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n",
+ panel_type);
+
+ /*
+ * get hold of the correct configuration block and pps data as per
+ * the panel_type as index
+ */
+ config = &start->config[panel_type];
+ pps = &start->pps[panel_type];
+
+ /* store as of now full data. Trim when we realise all is not needed */
+ dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL);
+ if (!dev_priv->vbt.dsi.config)
+ return;
+
+ dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL);
+ if (!dev_priv->vbt.dsi.pps) {
+ kfree(dev_priv->vbt.dsi.config);
+ return;
+ }
+
+ /* We have mandatory mipi config blocks. Initialize as generic panel */
dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
+
+ /* Check if we have sequence block as well */
+ sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
+ if (!sequence) {
+ DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n");
+ return;
+ }
+
+ DRM_DEBUG_DRIVER("Found MIPI sequence block\n");
+
+ block_size = get_blocksize(sequence);
+
+ /*
+ * parse the sequence block for individual sequences
+ */
+ dev_priv->vbt.dsi.seq_version = sequence->version;
+
+ seq_data = &sequence->data[0];
+
+ /*
+ * sequence block is variable length and hence we need to parse and
+ * get the sequence data for specific panel id
+ */
+ for (i = 0; i < MAX_MIPI_CONFIGURATIONS; i++) {
+ panel_id = *seq_data;
+ seq_size = *((u16 *) (seq_data + 1));
+ if (panel_id == panel_type)
+ break;
+
+ /* skip the sequence including seq header of 3 bytes */
+ seq_data = seq_data + 3 + seq_size;
+ if ((seq_data - &sequence->data[0]) > block_size) {
+ DRM_ERROR("Sequence start is beyond sequence block size, corrupted sequence block\n");
+ return;
+ }
+ }
+
+ if (i == MAX_MIPI_CONFIGURATIONS) {
+ DRM_ERROR("Sequence block detected but no valid configuration\n");
+ return;
+ }
+
+ /* check if found sequence is completely within the sequence block
+ * just being paranoid */
+ if (seq_size > block_size) {
+ DRM_ERROR("Corrupted sequence/size, bailing out\n");
+ return;
+ }
+
+ /* skip the panel id(1 byte) and seq size(2 bytes) */
+ dev_priv->vbt.dsi.data = kmemdup(seq_data + 3, seq_size, GFP_KERNEL);
+ if (!dev_priv->vbt.dsi.data)
+ return;
+
+ /*
+ * loop into the sequence data and split into multiple sequneces
+ * There are only 5 types of sequences as of now
+ */
+ data = dev_priv->vbt.dsi.data;
+ dev_priv->vbt.dsi.size = seq_size;
+
+ /* two consecutive 0x00 indicate end of all sequences */
+ while (1) {
+ int seq_id = *data;
+ if (MIPI_SEQ_MAX > seq_id && seq_id > MIPI_SEQ_UNDEFINED) {
+ dev_priv->vbt.dsi.sequence[seq_id] = data;
+ DRM_DEBUG_DRIVER("Found mipi sequence - %d\n", seq_id);
+ } else {
+ DRM_ERROR("undefined sequence\n");
+ goto err;
+ }
+
+ /* partial parsing to skip elements */
+ data = goto_next_sequence(data, &seq_size);
+
+ if (data == NULL) {
+ DRM_ERROR("Sequence elements going beyond block itself. Sequence block parsing failed\n");
+ goto err;
+ }
+
+ if (*data == 0)
+ break; /* end of sequence reached */
+ }
+
+ DRM_DEBUG_DRIVER("MIPI related vbt parsing complete\n");
+ return;
+err:
+ kfree(dev_priv->vbt.dsi.data);
+ dev_priv->vbt.dsi.data = NULL;
+
+ /* error during parsing so set all pointers to null
+ * because of partial parsing */
+ memset(dev_priv->vbt.dsi.sequence, 0, MIPI_SEQ_MAX);
}
static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
@@ -899,4 +899,35 @@ struct bdb_mipi_sequence {
u8 data[0];
};
+/* MIPI Sequnece Block definitions */
+enum mipi_seq {
+ MIPI_SEQ_UNDEFINED = 0,
+ MIPI_SEQ_ASSERT_RESET,
+ MIPI_SEQ_INIT_OTP,
+ MIPI_SEQ_DISPLAY_ON,
+ MIPI_SEQ_DISPLAY_OFF,
+ MIPI_SEQ_DEASSERT_RESET,
+ MIPI_SEQ_MAX
+};
+
+enum mipi_seq_element {
+ MIPI_SEQ_ELEM_UNDEFINED = 0,
+ MIPI_SEQ_ELEM_SEND_PKT,
+ MIPI_SEQ_ELEM_DELAY,
+ MIPI_SEQ_ELEM_GPIO,
+ MIPI_SEQ_ELEM_STATUS,
+ MIPI_SEQ_ELEM_MAX
+};
+
+enum mipi_gpio_pin_index {
+ MIPI_GPIO_UNDEFINED = 0,
+ MIPI_GPIO_PANEL_ENABLE,
+ MIPI_GPIO_BL_ENABLE,
+ MIPI_GPIO_PWM_ENABLE,
+ MIPI_GPIO_RESET_N,
+ MIPI_GPIO_PWR_DOWN_R,
+ MIPI_GPIO_STDBY_RST_N,
+ MIPI_GPIO_MAX
+};
+
#endif /* _I830_BIOS_H_ */