| Message ID | 20230406144330.1932798-3-leitao@debian.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | add initial io_uring_cmd support for sockets | expand |
On 4/6/23 15:43, Breno Leitao wrote: > This is the implementation of uring_cmd for the udp protocol. It > basically encompasses SOCKET_URING_OP_SIOCOUTQ and > SOCKET_URING_OP_SIOCINQ, which is similar to the SIOCOUTQ and SIOCINQ > ioctls. > > The return value is exactly the same as the regular ioctl (udp_ioctl()). > > Signed-off-by: Breno Leitao <leitao@debian.org> > --- > include/net/udp.h | 2 ++ > include/uapi/linux/net.h | 5 +++++ > net/ipv4/udp.c | 16 ++++++++++++++++ > 3 files changed, 23 insertions(+) > > diff --git a/include/net/udp.h b/include/net/udp.h > index de4b528522bb..c0e829dacc2f 100644 > --- a/include/net/udp.h > +++ b/include/net/udp.h > @@ -283,6 +283,8 @@ void udp_flush_pending_frames(struct sock *sk); > int udp_cmsg_send(struct sock *sk, struct msghdr *msg, u16 *gso_size); > void udp4_hwcsum(struct sk_buff *skb, __be32 src, __be32 dst); > int udp_rcv(struct sk_buff *skb); > +int udp_uring_cmd(struct sock *sk, struct io_uring_cmd *cmd, > + unsigned int issue_flags); > int udp_ioctl(struct sock *sk, int cmd, unsigned long arg); > int udp_init_sock(struct sock *sk); > int udp_pre_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); > diff --git a/include/uapi/linux/net.h b/include/uapi/linux/net.h > index 4dabec6bd957..dd8e7ced7d24 100644 > --- a/include/uapi/linux/net.h > +++ b/include/uapi/linux/net.h > @@ -55,4 +55,9 @@ typedef enum { > > #define __SO_ACCEPTCON (1 << 16) /* performed a listen */ > > +enum { > + SOCKET_URING_OP_SIOCINQ = 0, > + SOCKET_URING_OP_SIOCOUTQ, > +}; > + > #endif /* _UAPI_LINUX_NET_H */ > diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c > index c605d171eb2d..d6d60600831b 100644 > --- a/net/ipv4/udp.c > +++ b/net/ipv4/udp.c > @@ -113,6 +113,7 @@ > #include <net/sock_reuseport.h> > #include <net/addrconf.h> > #include <net/udp_tunnel.h> > +#include <linux/io_uring.h> > #if IS_ENABLED(CONFIG_IPV6) > #include <net/ipv6_stubs.h> > #endif > @@ -1711,6 +1712,20 @@ static int first_packet_length(struct sock *sk) > return res; > } > > +int udp_uring_cmd(struct sock *sk, struct io_uring_cmd *cmd, > + unsigned int issue_flags) > +{ > + switch (cmd->sqe->cmd_op) { Not particularly a problem of this series, but what bothers me is the quite unfortunate placement of cmd_op in SQE. struct io_uring_sqe { ... union { __u64 d1; struct { __u32 cmd_op; __u32 __pad1; }; }; __u64 d2; __u32 d3; ... }; I'd much prefer it like this: struct io_uring_sqe { ... __u64 d1[2]; __u32 cmd_op; ... }; We can't change it for NVMe, but at least new commands can have a better layout. It's read in the generic cmd path, i.e. io_uring_cmd_prep(), so will need some refactoring to make the placement cmd specific.
diff --git a/include/net/udp.h b/include/net/udp.h index de4b528522bb..c0e829dacc2f 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -283,6 +283,8 @@ void udp_flush_pending_frames(struct sock *sk); int udp_cmsg_send(struct sock *sk, struct msghdr *msg, u16 *gso_size); void udp4_hwcsum(struct sk_buff *skb, __be32 src, __be32 dst); int udp_rcv(struct sk_buff *skb); +int udp_uring_cmd(struct sock *sk, struct io_uring_cmd *cmd, + unsigned int issue_flags); int udp_ioctl(struct sock *sk, int cmd, unsigned long arg); int udp_init_sock(struct sock *sk); int udp_pre_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len); diff --git a/include/uapi/linux/net.h b/include/uapi/linux/net.h index 4dabec6bd957..dd8e7ced7d24 100644 --- a/include/uapi/linux/net.h +++ b/include/uapi/linux/net.h @@ -55,4 +55,9 @@ typedef enum { #define __SO_ACCEPTCON (1 << 16) /* performed a listen */ +enum { + SOCKET_URING_OP_SIOCINQ = 0, + SOCKET_URING_OP_SIOCOUTQ, +}; + #endif /* _UAPI_LINUX_NET_H */ diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index c605d171eb2d..d6d60600831b 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -113,6 +113,7 @@ #include <net/sock_reuseport.h> #include <net/addrconf.h> #include <net/udp_tunnel.h> +#include <linux/io_uring.h> #if IS_ENABLED(CONFIG_IPV6) #include <net/ipv6_stubs.h> #endif @@ -1711,6 +1712,20 @@ static int first_packet_length(struct sock *sk) return res; } +int udp_uring_cmd(struct sock *sk, struct io_uring_cmd *cmd, + unsigned int issue_flags) +{ + switch (cmd->sqe->cmd_op) { + case SOCKET_URING_OP_SIOCOUTQ: + return sk_wmem_alloc_get(sk); + case SOCKET_URING_OP_SIOCINQ: + return max_t(int, 0, first_packet_length(sk)); + default: + return -ENOIOCTLCMD; + } +} +EXPORT_SYMBOL_GPL(udp_uring_cmd); + /* * IOCTL requests applicable to the UDP protocol */ @@ -2952,6 +2967,7 @@ struct proto udp_prot = { .connect = ip4_datagram_connect, .disconnect = udp_disconnect, .ioctl = udp_ioctl, + .uring_cmd = udp_uring_cmd, .init = udp_init_sock, .destroy = udp_destroy_sock, .setsockopt = udp_setsockopt,
This is the implementation of uring_cmd for the udp protocol. It basically encompasses SOCKET_URING_OP_SIOCOUTQ and SOCKET_URING_OP_SIOCINQ, which is similar to the SIOCOUTQ and SIOCINQ ioctls. The return value is exactly the same as the regular ioctl (udp_ioctl()). Signed-off-by: Breno Leitao <leitao@debian.org> --- include/net/udp.h | 2 ++ include/uapi/linux/net.h | 5 +++++ net/ipv4/udp.c | 16 ++++++++++++++++ 3 files changed, 23 insertions(+)