@@ -367,7 +367,13 @@ do_transfer()
fi
if [ $addr_nr_ns2 -gt 0 ]; then
- let add_nr_ns2=addr_nr_ns2
+ if [ $addr_nr_ns2 -gt 10 ]; then
+ let add_nr_ns2=addr_nr_ns2-10
+ flags=subflow,fullmesh
+ else
+ let add_nr_ns2=addr_nr_ns2
+ flags=subflow
+ fi
counter=3
sleep 1
while [ $add_nr_ns2 -gt 0 ]; do
@@ -377,7 +383,7 @@ do_transfer()
else
addr="10.0.$counter.2"
fi
- ip netns exec $ns2 ./pm_nl_ctl add $addr flags subflow
+ ip netns exec $ns2 ./pm_nl_ctl add $addr flags $flags
let counter+=1
let add_nr_ns2-=1
done
@@ -1697,6 +1703,55 @@ deny_join_id0_tests()
chk_join_nr "subflow and address allow join id0 2" 1 1 1
}
+fullmesh_tests()
+{
+ # fullmesh 1
+ # 2 fullmesh addrs in ns2, added before the connection,
+ # 1 non-fullmesh addr in ns1, added during the connection.
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 0 4
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 4
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow,fullmesh
+ ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow,fullmesh
+ run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
+ chk_join_nr "fullmesh test 2x1" 4 4 4
+ chk_add_nr 1 1
+
+ # fullmesh 2
+ # 1 non-fullmesh addr in ns1, added before the connection,
+ # 1 fullmesh addr in ns2, added during the connection.
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 1 3
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ run_tests $ns1 $ns2 10.0.1.1 0 0 11 slow # 11 here meams creating 1 fullmesh subflow
+ chk_join_nr "fullmesh test 1x1" 3 3 3
+ chk_add_nr 1 1
+
+ # fullmesh 3
+ # 1 non-fullmesh addr in ns1, added before the connection,
+ # 2 fullmesh addrs in ns2, added during the connection.
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 2 5
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 5
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ run_tests $ns1 $ns2 10.0.1.1 0 0 12 slow # 12 here meams creating 2 fullmesh subflows
+ chk_join_nr "fullmesh test 1x2" 5 5 5
+ chk_add_nr 1 1
+
+ # fullmesh 4
+ # 1 non-fullmesh addr in ns1, added before the connection,
+ # 2 fullmesh addrs in ns2, added during the connection,
+ # limit max_subflows to 4.
+ reset
+ ip netns exec $ns1 ./pm_nl_ctl limits 2 4
+ ip netns exec $ns2 ./pm_nl_ctl limits 1 4
+ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ run_tests $ns1 $ns2 10.0.1.1 0 0 12 slow
+ chk_join_nr "fullmesh test 1x2, limited" 4 4 4
+ chk_add_nr 1 1
+}
+
all_tests()
{
subflows_tests
@@ -1712,6 +1767,7 @@ all_tests()
syncookies_tests
checksum_tests
deny_join_id0_tests
+ fullmesh_tests
}
usage()
@@ -1730,6 +1786,7 @@ usage()
echo " -k syncookies_tests"
echo " -S checksum_tests"
echo " -d deny_join_id0_tests"
+ echo " -m fullmesh_tests"
echo " -c capture pcap files"
echo " -C enable data checksum"
echo " -h help"
@@ -1765,7 +1822,7 @@ if [ $do_all_tests -eq 1 ]; then
exit $ret
fi
-while getopts 'fsltra64bpkdchCS' opt; do
+while getopts 'fsltra64bpkdmchCS' opt; do
case $opt in
f)
subflows_tests
@@ -1806,6 +1863,9 @@ while getopts 'fsltra64bpkdchCS' opt; do
d)
deny_join_id0_tests
;;
+ m)
+ fullmesh_tests
+ ;;
c)
;;
C)