[net-next,0/8] Introduce macsec hardware offload for cn10k platform

Message

Subbaraya Sundeep Sept. 26, 2022, 1:36 p.m. UTC

CN10K-B and CNF10K-B variaints of CN10K silicon has macsec block(MCS)
to encrypt and decrypt packets at MAC/hardware level. This block is a
global resource with hardware resources like SecYs, SCs and SAs
and is in between NIX block and RPM LMAC. CN10K-B silicon has only
one MCS block which receives packets from all LMACS whereas
CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are
similar in operation except for few register offsets and some
configurations require writing to different registers. This patchset
introduces macsec hardware offloading support. AF driver manages hardware
resources and PF driver consumes them when macsec hardware offloading
is needed.

Patch 1 adds basic pci driver for both CN10K-B and CNF10K-B
silicons and initializes hardware block.
Patches 2 and 3 adds mailboxes to init, reset and manage
resources of the MCS block
Patch 4 adds a low priority rule in MCS TCAM so that the
traffic which do not need macsec processing can be sent/received
Patch 5 adds macsec stats collection support
Patch 6 adds interrupt handling support and any event in which
AF consumer is interested can be notified via mbox notification
Patch 7 adds debugfs support which helps in debugging packet
path
Patch 8 introduces macsec hardware offload feature for
PF netdev driver.

Thanks,
Sundeep

Geetha sowjanya (7):
  octeontx2-af: cn10k: Introduce driver for macsec block.
  octeontx2-af: cn10k: mcs: Add mailboxes for port related operations
  octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources
  octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic
  octeontx2-af: cn10k: mcs: Support for stats collection
  octeontx2-af: cn10k: mcs: Handle MCS block interrupts
  octeontx2-af: cn10k: mcs: Add debugfs support

Subbaraya Sundeep (1):
  octeontx2-pf: mcs: Introduce MACSEC hardware offloading

 drivers/net/ethernet/marvell/octeontx2/af/Makefile |    2 +-
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |  471 +++++-
 drivers/net/ethernet/marvell/octeontx2/af/mcs.c    | 1601 +++++++++++++++++++
 drivers/net/ethernet/marvell/octeontx2/af/mcs.h    |  246 +++
 .../ethernet/marvell/octeontx2/af/mcs_cnf10kb.c    |  214 +++
 .../net/ethernet/marvell/octeontx2/af/mcs_reg.h    | 1102 +++++++++++++
 .../net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c |  888 +++++++++++
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    |   20 +-
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |   21 +
 .../ethernet/marvell/octeontx2/af/rvu_debugfs.c    |  346 ++++
 .../net/ethernet/marvell/octeontx2/nic/Makefile    |    1 +
 .../ethernet/marvell/octeontx2/nic/cn10k_macsec.c  | 1668 ++++++++++++++++++++
 .../ethernet/marvell/octeontx2/nic/otx2_common.c   |    1 +
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |   90 ++
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |   16 +
 15 files changed, 6680 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/mcs.c
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/mcs.h
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/mcs_cnf10kb.c
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/mcs_reg.h
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/mcs_rvu_if.c
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c