mbox series

[net-next,0/2] DP83TD510 Single Pair 10Mbps Ethernet PHY

Message ID 20201008162347.5290-1-dmurphy@ti.com (mailing list archive)
Headers show
Series DP83TD510 Single Pair 10Mbps Ethernet PHY | expand

Message

Dan Murphy Oct. 8, 2020, 4:23 p.m. UTC
Hello

The DP83TD510 is an Ethernet PHY supporting single pair of twisted wires. The
PHY is capable of 10Mbps communication over long distances and exceeds the
IEEE 802.3cg 10BASE-T1L single-pair Ethernet specification.  The PHY supports
various voltage level signalling and can be forced to support a specific
voltage or allowed to perfrom auto negotiation on the voltage level. The
default for the PHY is auto negotiation but if the PHY is forced to a specific
voltage then the LP must also support the same voltage.

Dan

Dan Murphy (2):
  dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY
  net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY

 .../devicetree/bindings/net/ti,dp83td510.yaml |  70 +++
 drivers/net/phy/Kconfig                       |   6 +
 drivers/net/phy/Makefile                      |   1 +
 drivers/net/phy/dp83td510.c                   | 583 ++++++++++++++++++
 4 files changed, 660 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ti,dp83td510.yaml
 create mode 100644 drivers/net/phy/dp83td510.c