mbox series

[v4,net-next,00/13] Add Support for Marvell OcteonTX2 Cryptographic

Message ID 20201009153421.30562-1-schalla@marvell.com (mailing list archive)
Headers show
Series Add Support for Marvell OcteonTX2 Cryptographic | expand

Message

Srujana Challa Oct. 9, 2020, 3:34 p.m. UTC
This series introduces crypto(CPT) drivers(PF & VF) for Marvell OcteonTX2
CN96XX Soc.

OcteonTX2 SOC's resource virtualization unit (RVU) supports multiple
physical and virtual functions. Each of the PF/VF's functionality is
determined by what kind of resources are attached to it. When the CPT
block is attached to a VF, it can function as a security device.
The following document provides an overview of the hardware and
different drivers for the OcteonTX2 SOC: 
https://www.kernel.org/doc/Documentation/networking/device_drivers/marvell/octeontx2.rst

The CPT PF driver is responsible for:
- Forwarding messages to/from VFs from/to admin function(AF),
- Enabling/disabling VFs,
- Loading/unloading microcode (creation/deletion of engine groups).

The CPT VF driver works as a crypto offload device.

This patch series includes:
- Patch to update existing Marvell sources to support the CPT driver.
- Patch that adds mailbox messages to the admin function (AF) driver,
to configure CPT HW registers.
- CPT PF driver patches that include AF<=>PF<=>VF mailbox communication,
sriov_configure, and firmware load to the acceleration engines.
- CPT VF driver patches that include VF<=>PF mailbox communication and
crypto offload support through the kernel cryptographic API.

This series is tested with CRYPTO_EXTRA_TESTS enabled and
CRYPTO_DISABLE_TESTS disabled.

Changes since v3:
*  Splitup the patches into smaller patches with more informartion.
Changes since v2:
 * Fixed C=1 warnings.
 * Added code to exit CPT VF driver gracefully.
 * Moved OcteonTx2 asm code to a header file under include/linux/soc/
Changes since v1:
 * Moved Makefile changes from patch4 to patch2 and patch3.

Srujana Challa (13):
  octeontx2-pf: move lmt flush to include/linux/soc
  octeontx2-af: add mailbox interface for CPT
  octeontx2-af: add debugfs entries for CPT block
  drivers: crypto: add Marvell OcteonTX2 CPT PF driver
  crypto: octeontx2: add mailbox communication with AF
  crypto: octeontx2: enable SR-IOV and mailbox communication with VF
  crypto: octeontx2: load microcode and create engine groups
  crypto: octeontx2: add LF framework
  crypto: octeontx2: add support to get engine capabilities
  crypto: octeontx2: add mailbox for inline-IPsec RX LF cfg
  crypto: octeontx2: add virtual function driver support
  crypto: octeontx2: add support to process the crypto request
  crypto: octeontx2: register with linux crypto framework

 MAINTAINERS                                   |    2 +
 drivers/crypto/marvell/Kconfig                |   14 +
 drivers/crypto/marvell/Makefile               |    1 +
 drivers/crypto/marvell/octeontx2/Makefile     |   10 +
 .../marvell/octeontx2/otx2_cpt_common.h       |  132 ++
 .../marvell/octeontx2/otx2_cpt_hw_types.h     |  464 +++++
 .../marvell/octeontx2/otx2_cpt_mbox_common.c  |  202 ++
 .../marvell/octeontx2/otx2_cpt_reqmgr.h       |  197 ++
 drivers/crypto/marvell/octeontx2/otx2_cptlf.c |  426 +++++
 drivers/crypto/marvell/octeontx2/otx2_cptlf.h |  351 ++++
 drivers/crypto/marvell/octeontx2/otx2_cptpf.h |   53 +
 .../marvell/octeontx2/otx2_cptpf_main.c       |  533 ++++++
 .../marvell/octeontx2/otx2_cptpf_mbox.c       |  424 +++++
 .../marvell/octeontx2/otx2_cptpf_ucode.c      | 1533 +++++++++++++++
 .../marvell/octeontx2/otx2_cptpf_ucode.h      |  162 ++
 drivers/crypto/marvell/octeontx2/otx2_cptvf.h |   28 +
 .../marvell/octeontx2/otx2_cptvf_algs.c       | 1665 +++++++++++++++++
 .../marvell/octeontx2/otx2_cptvf_algs.h       |  170 ++
 .../marvell/octeontx2/otx2_cptvf_main.c       |  408 ++++
 .../marvell/octeontx2/otx2_cptvf_mbox.c       |  139 ++
 .../marvell/octeontx2/otx2_cptvf_reqmgr.c     |  539 ++++++
 .../ethernet/marvell/octeontx2/af/Makefile    |    3 +-
 .../net/ethernet/marvell/octeontx2/af/mbox.h  |   85 +
 .../net/ethernet/marvell/octeontx2/af/rvu.c   |    2 +-
 .../net/ethernet/marvell/octeontx2/af/rvu.h   |    7 +
 .../ethernet/marvell/octeontx2/af/rvu_cpt.c   |  343 ++++
 .../marvell/octeontx2/af/rvu_debugfs.c        |  342 ++++
 .../ethernet/marvell/octeontx2/af/rvu_nix.c   |   75 +
 .../ethernet/marvell/octeontx2/af/rvu_reg.h   |   65 +-
 .../marvell/octeontx2/nic/otx2_common.h       |   13 +-
 include/linux/soc/marvell/octeontx2/asm.h     |   29 +
 31 files changed, 8397 insertions(+), 20 deletions(-)
 create mode 100644 drivers/crypto/marvell/octeontx2/Makefile
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cpt_common.h
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cpt_hw_types.h
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cpt_mbox_common.c
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptlf.c
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptlf.h
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptpf.h
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptpf_main.c
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptpf_mbox.c
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.h
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptvf.h
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.h
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptvf_main.c
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptvf_mbox.c
 create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
 create mode 100644 include/linux/soc/marvell/octeontx2/asm.h

Comments

Jakub Kicinski Oct. 10, 2020, 1:37 a.m. UTC | #1
On Fri, 9 Oct 2020 21:04:08 +0530 Srujana Challa wrote:
> This series introduces crypto(CPT) drivers(PF & VF) for Marvell OcteonTX2
> CN96XX Soc.
> 
> OcteonTX2 SOC's resource virtualization unit (RVU) supports multiple
> physical and virtual functions. Each of the PF/VF's functionality is
> determined by what kind of resources are attached to it. When the CPT
> block is attached to a VF, it can function as a security device.
> The following document provides an overview of the hardware and
> different drivers for the OcteonTX2 SOC: 
> https://www.kernel.org/doc/Documentation/networking/device_drivers/marvell/octeontx2.rst
> 
> The CPT PF driver is responsible for:
> - Forwarding messages to/from VFs from/to admin function(AF),
> - Enabling/disabling VFs,
> - Loading/unloading microcode (creation/deletion of engine groups).
> 
> The CPT VF driver works as a crypto offload device.
> 
> This patch series includes:
> - Patch to update existing Marvell sources to support the CPT driver.
> - Patch that adds mailbox messages to the admin function (AF) driver,
> to configure CPT HW registers.
> - CPT PF driver patches that include AF<=>PF<=>VF mailbox communication,
> sriov_configure, and firmware load to the acceleration engines.
> - CPT VF driver patches that include VF<=>PF mailbox communication and
> crypto offload support through the kernel cryptographic API.
> 
> This series is tested with CRYPTO_EXTRA_TESTS enabled and
> CRYPTO_DISABLE_TESTS disabled.

Please rebase and resend, this doesn't apply to net-next:

error: patch failed: drivers/net/ethernet/marvell/octeontx2/af/Makefile:8
error: drivers/net/ethernet/marvell/octeontx2/af/Makefile: patch does not apply
hint: Use 'git am --show-current-patch=diff' to see the failed patch
Applying: octeontx2-pf: move lmt flush to include/linux/soc
Applying: octeontx2-af: add mailbox interface for CPT
Patch failed at 0002 octeontx2-af: add mailbox interface for CPT
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".