| Message ID | 20210325173412.82911-1-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | net: pch: fix and a few cleanups | expand |
On Thu, Mar 25, 2021 at 07:34:07PM +0200, Andy Shevchenko wrote: > The series provides one fix (patch 1) for GPIO to be able to wait for > the GPIO driver to appear. This is separated from the conversion to > the GPIO descriptors (patch 2) in order to have a possibility for > backporting. Patches 3 and 4 fix a minor warnings from Sparse while > moving to a new APIs. Patch 5 is MODULE_VERSION() clean up. > > Tested on Intel Minnowboard (v1). Anything should I do here?
Hi Andy, ... > On Thu, Mar 25, 2021 at 07:34:07PM +0200, Andy Shevchenko wrote: > > The series provides one fix (patch 1) for GPIO to be able to wait for > > the GPIO driver to appear. This is separated from the conversion to > > the GPIO descriptors (patch 2) in order to have a possibility for > > backporting. Patches 3 and 4 fix a minor warnings from Sparse while > > moving to a new APIs. Patch 5 is MODULE_VERSION() clean up. > > > > Tested on Intel Minnowboard (v1). > > Anything should I do here? it's ok for me > -- > With Best Regards, > Andy Shevchenko > Best regards, Flavio Suligoi
On Tue, Mar 30, 2021 at 07:46:58AM +0000, Flavio Suligoi wrote: > Hi Andy, > ... > > On Thu, Mar 25, 2021 at 07:34:07PM +0200, Andy Shevchenko wrote: > > > The series provides one fix (patch 1) for GPIO to be able to wait for > > > the GPIO driver to appear. This is separated from the conversion to > > > the GPIO descriptors (patch 2) in order to have a possibility for > > > backporting. Patches 3 and 4 fix a minor warnings from Sparse while > > > moving to a new APIs. Patch 5 is MODULE_VERSION() clean up. > > > > > > Tested on Intel Minnowboard (v1). > > > > Anything should I do here? > > it's ok for me Thanks! Who may apply them?
Hi Andy, > > > On Thu, Mar 25, 2021 at 07:34:07PM +0200, Andy Shevchenko wrote: > > > > The series provides one fix (patch 1) for GPIO to be able to wait for > > > > the GPIO driver to appear. This is separated from the conversion to > > > > the GPIO descriptors (patch 2) in order to have a possibility for > > > > backporting. Patches 3 and 4 fix a minor warnings from Sparse while > > > > moving to a new APIs. Patch 5 is MODULE_VERSION() clean up. > > > > > > > > Tested on Intel Minnowboard (v1). > > > > > > Anything should I do here? > > > > it's ok for me > > Thanks! > Who may apply them? I used your patches on kernel net-next 5.12.0-rc2, on a board with an Intel(R) Atom(TM) CPU E640 @ 1.00GHz and an EG20T PCH. I used the built-in OKI gigabit ethernet controller: 02:00.1 Ethernet controller: Intel Corporation Platform Controller Hub EG20T Gigabit Ethernet Controller (rev 02) Kernel driver in use: pch_gbe with a simple iperf test and all works fine: ht-700 ~ # iperf -c 192.168.200.1 ------------------------------------------------------------ Client connecting to 192.168.200.1, TCP port 5001 TCP window size: 45.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.200.159 port 38638 connected with 192.168.200.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 178 MBytes 149 Mbits/sec ht-700 ~ # iperf -c 192.168.200.1 ------------------------------------------------------------ Client connecting to 192.168.200.1, TCP port 5001 TCP window size: 45.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.200.159 port 38640 connected with 192.168.200.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 178 MBytes 149 Mbits/sec ht-700 ~ # iperf -c 192.168.200.1 -u ------------------------------------------------------------ Client connecting to 192.168.200.1, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 208 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.200.159 port 58364 connected with 192.168.200.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.25 MBytes 1.05 Mbits/sec [ 3] Sent 893 datagrams ht-700 ~ # iperf -c 192.168.200.1 -u ------------------------------------------------------------ Client connecting to 192.168.200.1, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 208 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.200.159 port 32778 connected with 192.168.200.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.25 MBytes 1.05 Mbits/sec [ 3] Sent 893 datagrams ht-700 ~ # uname -a Linux ht-700 5.12.0-rc2-watchdog+ #12 SMP Thu Apr 8 11:08:49 CEST 2021 x86_64 x86_64 x86_64 GNU/Linux ht-700 ~ # I hope this can help you. > Tested-by: Flavio Suligoi <f.suligoi@asem.it> > -- > With Best Regards, > Andy Shevchenko > Best regards, Flavio Suligoi
On Thu, Apr 08, 2021 at 09:57:12AM +0000, Flavio Suligoi wrote: > > > > On Thu, Mar 25, 2021 at 07:34:07PM +0200, Andy Shevchenko wrote: > > > > > The series provides one fix (patch 1) for GPIO to be able to wait for > > > > > the GPIO driver to appear. This is separated from the conversion to > > > > > the GPIO descriptors (patch 2) in order to have a possibility for > > > > > backporting. Patches 3 and 4 fix a minor warnings from Sparse while > > > > > moving to a new APIs. Patch 5 is MODULE_VERSION() clean up. > > > > > > > > > > Tested on Intel Minnowboard (v1). > > > > > > > > Anything should I do here? > > > > > > it's ok for me > > > > Thanks! > > Who may apply them? > > I used your patches on kernel net-next 5.12.0-rc2, on a board with an > Intel(R) Atom(TM) CPU E640 @ 1.00GHz and an EG20T PCH. > I used the built-in OKI gigabit ethernet controller: > > 02:00.1 Ethernet controller: Intel Corporation Platform Controller Hub EG20T Gigabit Ethernet Controller (rev 02) > Kernel driver in use: pch_gbe > > with a simple iperf test and all works fine: > I hope this can help you. > Tested-by: Flavio Suligoi <f.suligoi@asem.it> Thank you, Flavio, very much! Jesse, Jakub, David. can this be applied, please?
On Thu, Mar 25, 2021 at 07:34:07PM +0200, Andy Shevchenko wrote: > The series provides one fix (patch 1) for GPIO to be able to wait for > the GPIO driver to appear. This is separated from the conversion to > the GPIO descriptors (patch 2) in order to have a possibility for > backporting. Patches 3 and 4 fix a minor warnings from Sparse while > moving to a new APIs. Patch 5 is MODULE_VERSION() clean up. > > Tested on Intel Minnowboard (v1). Guys, it has been already the report from kbuild bot (sparse warnings), which should be fixed by this series (at least partially if not completely). Please, apply this as soon as it's possible. Or tell me what's wrong with the series. Thanks! > Since v2: > - added a few cleanups on top of the fix > > Andy Shevchenko (5): > net: pch_gbe: Propagate error from devm_gpio_request_one() > net: pch_gbe: Convert to use GPIO descriptors > net: pch_gbe: use readx_poll_timeout_atomic() variant > net: pch_gbe: Use proper accessors to BE data in pch_ptp_match() > net: pch_gbe: remove unneeded MODULE_VERSION() call > > .../net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 2 - > .../oki-semi/pch_gbe/pch_gbe_ethtool.c | 2 + > .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 103 +++++++++--------- > 3 files changed, 54 insertions(+), 53 deletions(-) > > -- > 2.30.2 >