| Message ID | 20211028134932.658167-1-clement.leger@bootlin.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add FDMA support on ocelot switch driver | expand |
On Thu, Oct 28, 2021 at 03:49:29PM +0200, Clément Léger wrote: > This series adds support for the Frame DMA present on the VSC7514 > switch. The FDMA is able to extract and inject packets on the various > ethernet interfaces present on the switch. > > While adding FDMA support, bindings were switched from .txt to .yaml > and mac address read from device-tree was added to allow be set instead > of using random mac address. > > Clément Léger (3): > net: ocelot: add support to get mac from device-tree > dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml > net: ocelot: add FDMA support > > .../bindings/net/mscc,vsc7514-switch.yaml | 183 ++++ > .../devicetree/bindings/net/mscc-ocelot.txt | 83 -- > drivers/net/ethernet/mscc/Makefile | 1 + > drivers/net/ethernet/mscc/ocelot.h | 2 + > drivers/net/ethernet/mscc/ocelot_fdma.c | 811 ++++++++++++++++++ > drivers/net/ethernet/mscc/ocelot_fdma.h | 60 ++ > drivers/net/ethernet/mscc/ocelot_net.c | 30 +- > drivers/net/ethernet/mscc/ocelot_vsc7514.c | 20 +- > include/linux/dsa/ocelot.h | 40 +- > include/soc/mscc/ocelot.h | 2 + > 10 files changed, 1140 insertions(+), 92 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml > delete mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt > create mode 100644 drivers/net/ethernet/mscc/ocelot_fdma.c > create mode 100644 drivers/net/ethernet/mscc/ocelot_fdma.h > > -- > 2.33.0 > Oh yes, finally some care and attention for the ocelot switchdev driver. I'll review this soon, but I can't today. Will you be keeping the hardware for some extended period of time, and do you have some other changes planned as well?
Le Thu, 28 Oct 2021 14:07:39 +0000, Vladimir Oltean <vladimir.oltean@nxp.com> a écrit : > On Thu, Oct 28, 2021 at 03:49:29PM +0200, Clément Léger wrote: > > This series adds support for the Frame DMA present on the VSC7514 > > switch. The FDMA is able to extract and inject packets on the > > various ethernet interfaces present on the switch. > > > > While adding FDMA support, bindings were switched from .txt to .yaml > > and mac address read from device-tree was added to allow be set > > instead of using random mac address. > > > > Clément Léger (3): > > net: ocelot: add support to get mac from device-tree > > dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml > > net: ocelot: add FDMA support > > > > .../bindings/net/mscc,vsc7514-switch.yaml | 183 ++++ > > .../devicetree/bindings/net/mscc-ocelot.txt | 83 -- > > drivers/net/ethernet/mscc/Makefile | 1 + > > drivers/net/ethernet/mscc/ocelot.h | 2 + > > drivers/net/ethernet/mscc/ocelot_fdma.c | 811 > > ++++++++++++++++++ drivers/net/ethernet/mscc/ocelot_fdma.h | > > 60 ++ drivers/net/ethernet/mscc/ocelot_net.c | 30 +- > > drivers/net/ethernet/mscc/ocelot_vsc7514.c | 20 +- > > include/linux/dsa/ocelot.h | 40 +- > > include/soc/mscc/ocelot.h | 2 + > > 10 files changed, 1140 insertions(+), 92 deletions(-) > > create mode 100644 > > Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml > > delete mode 100644 > > Documentation/devicetree/bindings/net/mscc-ocelot.txt create mode > > 100644 drivers/net/ethernet/mscc/ocelot_fdma.c create mode 100644 > > drivers/net/ethernet/mscc/ocelot_fdma.h > > > > -- > > 2.33.0 > > > > Oh yes, finally some care and attention for the ocelot switchdev > driver. I'll review this soon, but I can't today. > Will you be keeping the hardware for some extended period of time, and > do you have some other changes planned as well? Yes I'll keep the hardware for some time but I do not have other changes planned yet. Maybe there will be additional changes later but nothing sure. Clément