mbox series

[net-next,v3,0/3] Cadence MACB/GEM support for ZynqMP SGMII

Message ID 20220127002711.3632101-1-robert.hancock@calian.com (mailing list archive)
Headers show
Series Cadence MACB/GEM support for ZynqMP SGMII | expand

Message

Robert Hancock Jan. 27, 2022, 12:27 a.m. UTC 
Changes to allow SGMII mode to work properly in the GEM driver on the
Xilinx ZynqMP platform.

Changes since v2:
-fixed missing includes in DT binding example
-fixed phy_init and phy_power_on error handling/cleanup, moved
phy_power_on to open rather than probe

Changes since v1:
-changed order of controller reset and PHY init as per suggestion
-switched device reset to be optional
-updated bindings doc patch for switch to YAML

Robert Hancock (3):
  dt-bindings: net: cdns,macb: added generic PHY and reset mappings for
    ZynqMP
  net: macb: Added ZynqMP-specific initialization
  arm64: dts: zynqmp: Added GEM reset definitions

 .../devicetree/bindings/net/cdns,macb.yaml    | 56 +++++++++++++++++++
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |  8 +++
 drivers/net/ethernet/cadence/macb.h           |  5 ++
 drivers/net/ethernet/cadence/macb_main.c      | 53 +++++++++++++++++-
 4 files changed, 120 insertions(+), 2 deletions(-)