[bpf-next,v3,0/4] bpf, arm64: Optimize BPF store/load using

Message

Xu Kuohai March 16, 2022, 4:26 p.m. UTC

The current BPF store/load instruction is translated by the JIT into two
instructions. The first instruction moves the immediate offset into a
temporary register. The second instruction uses this temporary register
to do the real store/load.

In fact, arm64 supports addressing with immediate offsets. So This series
introduces optimization that uses arm64 str/ldr instruction with immediate
offset when the offset fits.

Example of generated instuction for r2 = *(u64 *)(r1 + 0):

Without optimization:
mov x10, 0
ldr x1, [x0, x10]

With optimization:
ldr x1, [x0, 0]

For the following bpftrace command:

  bpftrace -e 'kprobe:do_sys_open { printf("opening: %s\n", str(arg1)); }'

Without this series, jited code(fragment):

   0:   bti     c
   4:   stp     x29, x30, [sp, #-16]!
   8:   mov     x29, sp
   c:   stp     x19, x20, [sp, #-16]!
  10:   stp     x21, x22, [sp, #-16]!
  14:   stp     x25, x26, [sp, #-16]!
  18:   mov     x25, sp
  1c:   mov     x26, #0x0                       // #0
  20:   bti     j
  24:   sub     sp, sp, #0x90
  28:   add     x19, x0, #0x0
  2c:   mov     x0, #0x0                        // #0
  30:   mov     x10, #0xffffffffffffff78        // #-136
  34:   str     x0, [x25, x10]
  38:   mov     x10, #0xffffffffffffff80        // #-128
  3c:   str     x0, [x25, x10]
  40:   mov     x10, #0xffffffffffffff88        // #-120
  44:   str     x0, [x25, x10]
  48:   mov     x10, #0xffffffffffffff90        // #-112
  4c:   str     x0, [x25, x10]
  50:   mov     x10, #0xffffffffffffff98        // #-104
  54:   str     x0, [x25, x10]
  58:   mov     x10, #0xffffffffffffffa0        // #-96
  5c:   str     x0, [x25, x10]
  60:   mov     x10, #0xffffffffffffffa8        // #-88
  64:   str     x0, [x25, x10]
  68:   mov     x10, #0xffffffffffffffb0        // #-80
  6c:   str     x0, [x25, x10]
  70:   mov     x10, #0xffffffffffffffb8        // #-72
  74:   str     x0, [x25, x10]
  78:   mov     x10, #0xffffffffffffffc0        // #-64
  7c:   str     x0, [x25, x10]
  80:   mov     x10, #0xffffffffffffffc8        // #-56
  84:   str     x0, [x25, x10]
  88:   mov     x10, #0xffffffffffffffd0        // #-48
  8c:   str     x0, [x25, x10]
  90:   mov     x10, #0xffffffffffffffd8        // #-40
  94:   str     x0, [x25, x10]
  98:   mov     x10, #0xffffffffffffffe0        // #-32
  9c:   str     x0, [x25, x10]
  a0:   mov     x10, #0xffffffffffffffe8        // #-24
  a4:   str     x0, [x25, x10]
  a8:   mov     x10, #0xfffffffffffffff0        // #-16
  ac:   str     x0, [x25, x10]
  b0:   mov     x10, #0xfffffffffffffff8        // #-8
  b4:   str     x0, [x25, x10]
  b8:   mov     x10, #0x8                       // #8
  bc:   ldr     x2, [x19, x10]
  [...]

With this series, jited code(fragment):

   0:   bti     c
   4:   stp     x29, x30, [sp, #-16]!
   8:   mov     x29, sp
   c:   stp     x19, x20, [sp, #-16]!
  10:   stp     x21, x22, [sp, #-16]!
  14:   stp     x25, x26, [sp, #-16]!
  18:   stp     x27, x28, [sp, #-16]!
  1c:   mov     x25, sp
  20:   sub     x27, x25, #0x88
  24:   mov     x26, #0x0                       // #0
  28:   bti     j
  2c:   sub     sp, sp, #0x90
  30:   add     x19, x0, #0x0
  34:   mov     x0, #0x0                        // #0
  38:   str     x0, [x27]
  3c:   str     x0, [x27, #8]
  40:   str     x0, [x27, #16]
  44:   str     x0, [x27, #24]
  48:   str     x0, [x27, #32]
  4c:   str     x0, [x27, #40]
  50:   str     x0, [x27, #48]
  54:   str     x0, [x27, #56]
  58:   str     x0, [x27, #64]
  5c:   str     x0, [x27, #72]
  60:   str     x0, [x27, #80]
  64:   str     x0, [x27, #88]
  68:   str     x0, [x27, #96]
  6c:   str     x0, [x27, #104]
  70:   str     x0, [x27, #112]
  74:   str     x0, [x27, #120]
  78:   str     x0, [x27, #128]
  7c:   ldr     x2, [x19, #8]
  [...]

Tested with test_bpf on both big-endian and little-endian arm64 qemu:

 test_bpf: Summary: 1026 PASSED, 0 FAILED, [1014/1014 JIT'ed]
 test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
 test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED

v2 -> v3:
1. Split the v2 patch into 2 patches, one for arm64 instruction encoder,
   the other for BPF JIT
2. Add tests for BPF_LDX/BPF_STX with different offsets
3. Adjust the offset of str/ldr(immediate) to positive number

v1 -> v2:
1. Remove macro definition that causes checkpatch to fail
2. Append result to commit message

Xu Kuohai (4):
  arm64: insn: add ldr/str with immediate offset
  bpf, arm64: Optimize BPF store/load using str/ldr with immediate offset
  bpf/tests: Add tests for BPF_LDX/BPF_STX with different offsets
  bpf, arm64: adjust the offset of str/ldr(immediate) to positive number

 arch/arm64/include/asm/insn.h |   9 ++
 arch/arm64/lib/insn.c         |  67 ++++++--
 arch/arm64/net/bpf_jit.h      |  14 ++
 arch/arm64/net/bpf_jit_comp.c | 212 ++++++++++++++++++++++---
 lib/test_bpf.c                | 285 +++++++++++++++++++++++++++++++++-
 5 files changed, 549 insertions(+), 38 deletions(-)