mbox series

[net-next,v7,0/3] Broadcom PTP PHY support

Message ID 20220614050810.54425-1-jonathan.lemon@gmail.com (mailing list archive)
Headers show
Series Broadcom PTP PHY support | expand

Message

Jonathan Lemon June 14, 2022, 5:08 a.m. UTC 
This adds PTP support for the Broadcom PHY BCM54210E (and the
specific variant BCM54213PE that the rpi-5.15 branch uses).

This has only been tested on the RPI CM4, which has one port.

There are other Broadcom chips which may benefit from using the
same framework here, although with different register sets.

v6->v7:
 Fix Kconfig dependencies (Jakub)

v5->v6:
 Fix calculations in bcm_ptp_adjtime_locked (Richard)
 Add bcm_ptp_stop (Florian)
 Update framesync handling for better masking and restore
 Cleanup 1PPS perout function, remove unsync'd version
 Add 1PPS extts detection
 Break out extts/perout into its own patch

v4->v5:
 Reorder so bcm-phy-lib.h shows up first, fixing dependency issues.
 Use set_normalized_timespec for adjusting ns in adjtime
 Return upscaled config setting from hwtstamp

v3->v4:
 Squash bcm-phy-lib.h and broadcom.c changes into one patch
 Reorder so the main patch shows up first.

v2->v3:
 Rearrange patches so they apply in order
 Use ERR_CAST

v1->v2:
 Squash Kconfig into main patch
 Move config checks into bcm-phy-lib.h
 Fix delta_ns calculations in adjtime
 Uppercase mode selector macros
 Only use NSE_INIT when necessary
 Remove the inserted Broadcom RX timestamp from the PTP packet
 Add perout (chip generated) and fsync out (timer generated)
 Remove PHY_ID_BCM54213PE special casing (needed for rpi tree)
--- 
CC: Andrew Lunn <andrew@lunn.ch>
CC: Florian Fainelli <f.fainelli@gmail.com>
CC: Richard Cochran <richardcochran@gmail.com>
CC: Lasse Johnsen <l@ssejohnsen.me>
CC: Heiner Kallweit <hkallweit1@gmail.com>
CC: Russell King <linux@armlinux.org.uk>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Paolo Abeni <pabeni@redhat.com>
CC: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
--- 

Jonathan Lemon (3):
  net: phy: broadcom: Add Broadcom PTP hooks to bcm-phy-lib
  net: phy: broadcom: Add PTP support for some Broadcom PHYs.
  net: phy: Add support for 1PPS out and external timestamps

 drivers/net/phy/Kconfig       |   5 +
 drivers/net/phy/Makefile      |   1 +
 drivers/net/phy/bcm-phy-lib.h |  19 +
 drivers/net/phy/bcm-phy-ptp.c | 945 ++++++++++++++++++++++++++++++++++
 drivers/net/phy/broadcom.c    |  33 +-
 5 files changed, 999 insertions(+), 4 deletions(-)
 create mode 100644 drivers/net/phy/bcm-phy-ptp.c