mbox series

[v7,0/3] net: ethernet: renesas: Add support for "Ethernet Switch"

Message ID 20221031123242.2528208-1-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
Headers show
Series net: ethernet: renesas: Add support for "Ethernet Switch" | expand

Message

Yoshihiro Shimoda Oct. 31, 2022, 12:32 p.m. UTC 
This patch series is based on next-20221027.

Add initial support for Renesas "Ethernet Switch" device of R-Car S4-8.
The hardware has features about forwarding for an ethernet switch
device. But, for now, it acts as ethernet controllers so that any
forwarding offload features are not supported. So, any switchdev
header files and DSA framework are not used.

Notes that this driver requires some special settings on marvell10g,
Especially host mactype and host speed. And, I need further investigation
to modify the marvell10g driver for upstream. But, the special settings
are applied, this rswitch driver can work correcfly without any changes
of this rswitch driver. So, I believe the rswitch driver can go for
upstream.

Changes from v6:
https://lore.kernel.org/all/20221028065458.2417293-1-yoshihiro.shimoda.uh@renesas.com/
 - Add Reviewed-by tag in the patch [1/3].
 - Fix ordering of initialization because NFS root can start mounting
   the filesystem before register_netdev() even returns

Changes from v5:
https://lore.kernel.org/all/20221027134034.2343230-1-yoshihiro.shimoda.uh@renesas.com/
 - Add maxItems for the ethernet-port/port/reg property.

Changes from v4:
https://lore.kernel.org/all/20221019083518.933070-1-yoshihiro.shimoda.uh@renesas.com/
 - Rebased on next-20221027.
 - Drop some unneeded properties on the dt-bindings doc.
 - Change the subject and commit descriptions on the patch [2/3].
 - Use phylink instead of phylib.
 - Modify struct rswitch_*_desc to remove similar functions ([gs]et_dptr).

Yoshihiro Shimoda (3):
  dt-bindings: net: renesas: Document Renesas Ethernet Switch
  net: ethernet: renesas: Add support for "Ethernet Switch"
  net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support

 .../net/renesas,r8a779f0-ether-switch.yaml    |  262 +++
 drivers/net/ethernet/renesas/Kconfig          |   11 +
 drivers/net/ethernet/renesas/Makefile         |    4 +
 drivers/net/ethernet/renesas/rcar_gen4_ptp.c  |  181 ++
 drivers/net/ethernet/renesas/rcar_gen4_ptp.h  |   72 +
 drivers/net/ethernet/renesas/rswitch.c        | 1841 +++++++++++++++++
 drivers/net/ethernet/renesas/rswitch.h        |  973 +++++++++
 7 files changed, 3344 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml
 create mode 100644 drivers/net/ethernet/renesas/rcar_gen4_ptp.c
 create mode 100644 drivers/net/ethernet/renesas/rcar_gen4_ptp.h
 create mode 100644 drivers/net/ethernet/renesas/rswitch.c
 create mode 100644 drivers/net/ethernet/renesas/rswitch.h

Comments

patchwork-bot+netdevbpf@kernel.org Nov. 2, 2022, 1 p.m. UTC | #1 
Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Mon, 31 Oct 2022 21:32:39 +0900 you wrote:
> This patch series is based on next-20221027.
> 
> Add initial support for Renesas "Ethernet Switch" device of R-Car S4-8.
> The hardware has features about forwarding for an ethernet switch
> device. But, for now, it acts as ethernet controllers so that any
> forwarding offload features are not supported. So, any switchdev
> header files and DSA framework are not used.
> 
> [...]

Here is the summary with links:
  - [v7,1/3] dt-bindings: net: renesas: Document Renesas Ethernet Switch
    https://git.kernel.org/netdev/net-next/c/f9edd82774c0
  - [v7,2/3] net: ethernet: renesas: Add support for "Ethernet Switch"
    https://git.kernel.org/netdev/net-next/c/3590918b5d07
  - [v7,3/3] net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support
    https://git.kernel.org/netdev/net-next/c/6c6fa1a00ad3

You are awesome, thank you!