mbox series

[v5,00/12] Add Ethernet driver for StarFive JH7110 SoC

Message ID 20230303085928.4535-1-samin.guo@starfivetech.com (mailing list archive)
Headers show
Series Add Ethernet driver for StarFive JH7110 SoC | expand

Message

Guo Samin March 3, 2023, 8:59 a.m. UTC
This series adds ethernet support for the StarFive JH7110 RISC-V SoC.
The series includes MAC driver. The MAC version is dwmac-5.20 (from
Synopsys DesignWare). For more information and support, you can visit
RVspace wiki[1].

You can simply review or test the patches at the link [2].

This patchset should be applied after the patchset [3], [4], [5].
[1]: https://wiki.rvspace.org/
[2]: https://github.com/SaminGuo/linux/tree/vf2-6.2-gmac
[3]: https://lore.kernel.org/all/20230221024645.127922-1-hal.feng@starfivetech.com/
[4]: https://lore.kernel.org/all/20230202030037.9075-1-Frank.Sae@motor-comm.com/
[5]: https://lore.kernel.org/all/20230215113249.47727-5-william.qiu@starfivetech.com/

Changes since v4:
- Supported both visionfive 2 v1.2A and visionfive 2 v1.3B.
- Reworded the maxitems number of resets property in 'snps,dwmac.yaml'.
- Suggested by Emil, dropped the _PLAT/_plat from the config/function/struct/file names.
- Suggested by Emil, added MODULE_DEVICE_TABLE().
- Suggested by Emil, dropped clk_gtxclk and use clk_tx_inv to set the clock frequency.
- Added phy interface mode configuration function.
- Rebased on tag v6.2.

Patch 12:
- No update
Patch 11:
- Configuration of gmac and phy for visionfive 2 v1.2A.
Patch 10:
- Configuration of gmac and phy for visionfive 2 v1.3B.
Patch 9:
- Added starfive,syscon for gmac nodes in jh7110.dtsi.
Patch 8:
- Added starfive_dwmac_set_mode to set PHY interface mode.
Patch 7:
- Added starfive,syscon item in StarFive-dwmac dt-bindings.
Patch 6:
- Moved SOC_STARFIVE to ARCH_STARFIVE in Kconfig.
- Dropped the _PLAT/_plat from the config/function/struct names. (by Emil)
- Added MODULE_DEVICE_TABLE() and udev will load the module automatically. (by Emil)
- Used { /* sentinel */ } for the last entry of starfive_eth_match. (by Emil)
- Added 'tx_use_rgmii_rxin_clk' to struct starfive_dwmac, to mark the clk_tx'parent is rgmii.
- Suggested by Emil, dropped clk_gtxclk and use clk_tx_inv to set the clock frequency.
Patch 5:
- Suggested by Emil, dropped mdio0/1 labels because there is no reference elsewhere.
Patch 4:
- Removed GTXC clk in StarFive-dwmac dt-bindings.
- Added starfive,tx-use-rgmii-clk item in StarFive-dwmac dt-bindings.
Patch 3:
- Added an optional reset single 'ahb' in 'snps,dwmac.yaml', according to
  stmmac_probe_config_dt/stmmac_dvr_probe.
Patch 2:
- No update
Patch 1:
- No update

Changes since v3:
- Reworded the maxitems number of resets property in 'snps,dwmac.yaml'
- Removed the unused code in 'dwmac-starfive-plat.c'.
- Reworded the return statement in 'starfive_eth_plat_fix_mac_speed' function.

Changes since v2:
- Renamed the dt-bindings 'starfive,jh71x0-dwmac.yaml' to 'starfive,jh7110-dwmac.yaml'.
- Reworded the commit messages.
- Reworded the example context in the dt-binding 'starfive,jh7110-dwmac.yaml'.
- Removed "starfive,jh7100-dwmac" compatible string and special initialization of jh7100.
- Removed the parts of YT8531,so dropped patch 5 and 6.
- Reworded the maxitems number of resets property in 'snps,dwmac.yaml'.

Changes since v1:
- Recovered the author of the 1st and 3rd patches back to Emil Renner Berthing.
- Added a new patch to update maxitems number of resets property in 'snps,dwmac.yaml'.
- Fixed the check errors reported by "make dt_binding_check".
- Renamed the dt-binding 'starfive,dwmac-plat.yaml' to 'starfive,jh71x0-dwmac.yaml'.
- Updated the example context in the dt-binding 'starfive,jh71x0-dwmac.yaml'.
- Added new dt-binding 'motorcomm,yt8531.yaml' to describe details of phy clock
  delay configuration parameters.
- Added more comments for PHY driver setting. For more details, see
  'motorcomm,yt8531.yaml'.
- Moved mdio device tree node from 'jh7110-starfive-visionfive-v2.dts' to 'jh7110.dtsi'.
- Re-worded the commit message of several patches.
- Renamed all the functions with starfive_eth_plat prefix in 'dwmac-starfive-plat.c'.
- Added "starfive,jh7100-dwmac" compatible string and special init to support JH7100.

Previous versions:
v1 - https://patchwork.kernel.org/project/linux-riscv/cover/20221201090242.2381-1-yanhong.wang@starfivetech.com/
v2 - https://patchwork.kernel.org/project/linux-riscv/cover/20221216070632.11444-1-yanhong.wang@starfivetech.com/
v3 - https://patchwork.kernel.org/project/linux-riscv/cover/20230106030001.1952-1-yanhong.wang@starfivetech.com/
v4 - https://patchwork.kernel.org/project/linux-riscv/cover/20230118061701.30047-1-yanhong.wang@starfivetech.com/

Emil Renner Berthing (2):
  dt-bindings: net: snps,dwmac: Add dwmac-5.20 version
  net: stmmac: platform: Add snps,dwmac-5.20 IP compatible string

Samin Guo (8):
  dt-bindings: net: snps,dwmac: Add an optional resets single 'ahb'
  riscv: dts: starfive: jh7110: Add ethernet device nodes
  net: stmmac: Add glue layer for StarFive JH7110 SoC
  dt-bindings: net: starfive,jh7110-dwmac: Add starfive,syscon
  net: stmmac: starfive_dmac: Add phy interface settings
  riscv: dts: starfive: jh7110: Add syscon to support phy interface
    settings
  riscv: dts: starfive: visionfive-2-v1.3b: Add gmac+phy's delay
    configuration
  riscv: dts: starfive: visionfive-2-v1.2a: Add gmac+phy's delay
    configuration

Yanhong Wang (2):
  dt-bindings: net: Add support StarFive dwmac
  riscv: dts: starfive: visionfive 2: Enable gmac device tree node

 .../devicetree/bindings/net/snps,dwmac.yaml   |  19 +-
 .../bindings/net/starfive,jh7110-dwmac.yaml   | 130 +++++++++++++
 MAINTAINERS                                   |   7 +
 .../jh7110-starfive-visionfive-2-v1.2a.dts    |  13 ++
 .../jh7110-starfive-visionfive-2-v1.3b.dts    |  27 +++
 .../jh7110-starfive-visionfive-2.dtsi         |  10 +
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |  93 ++++++++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  12 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-starfive.c  | 171 ++++++++++++++++++
 .../ethernet/stmicro/stmmac/stmmac_platform.c |   3 +-
 11 files changed, 481 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c


base-commit: 11934a315b671ddb09bc7ac5f505649e9f2623c7
prerequisite-patch-id: ad56ef54d3f2a18025abc9e27321c25beda16422
prerequisite-patch-id: 1be0fb49e0fbe293ca8fa94601e191b13c8c67d9
prerequisite-patch-id: 8b402a8d97294a9b568595816b0dc96afc5e6f5d
prerequisite-patch-id: 5c149662674f9e7dd888e2028fd8c9772948273f
prerequisite-patch-id: 0caf8a313a9f161447e0480a93b42467378b2164
prerequisite-patch-id: b2422f7a12f1e86e38c563139f3c1dbafc158efd
prerequisite-patch-id: be612664eca7049e987bfae15bb460caa82eb211
prerequisite-patch-id: 8300965cc6c55cad69f009da7916cf9e8ce628e7

Comments

Tommaso Merciai March 10, 2023, 8:09 a.m. UTC | #1
Hello Samin,

On Fri, Mar 03, 2023 at 04:59:16PM +0800, Samin Guo wrote:
> This series adds ethernet support for the StarFive JH7110 RISC-V SoC.
> The series includes MAC driver. The MAC version is dwmac-5.20 (from
> Synopsys DesignWare). For more information and support, you can visit
> RVspace wiki[1].
> 
> You can simply review or test the patches at the link [2].
> 
> This patchset should be applied after the patchset [3], [4], [5].
> [1]: https://wiki.rvspace.org/
> [2]: https://github.com/SaminGuo/linux/tree/vf2-6.2-gmac
> [3]: https://lore.kernel.org/all/20230221024645.127922-1-hal.feng@starfivetech.com/
> [4]: https://lore.kernel.org/all/20230202030037.9075-1-Frank.Sae@motor-comm.com/
> [5]: https://lore.kernel.org/all/20230215113249.47727-5-william.qiu@starfivetech.com/

Thanks for this series.
I'm able to boot Linux over nfs into jh7110-starfive-visionfive-2-v1.3b board

Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>

Regards,
Tommaso

> 
> Changes since v4:
> - Supported both visionfive 2 v1.2A and visionfive 2 v1.3B.
> - Reworded the maxitems number of resets property in 'snps,dwmac.yaml'.
> - Suggested by Emil, dropped the _PLAT/_plat from the config/function/struct/file names.
> - Suggested by Emil, added MODULE_DEVICE_TABLE().
> - Suggested by Emil, dropped clk_gtxclk and use clk_tx_inv to set the clock frequency.
> - Added phy interface mode configuration function.
> - Rebased on tag v6.2.
> 
> Patch 12:
> - No update
> Patch 11:
> - Configuration of gmac and phy for visionfive 2 v1.2A.
> Patch 10:
> - Configuration of gmac and phy for visionfive 2 v1.3B.
> Patch 9:
> - Added starfive,syscon for gmac nodes in jh7110.dtsi.
> Patch 8:
> - Added starfive_dwmac_set_mode to set PHY interface mode.
> Patch 7:
> - Added starfive,syscon item in StarFive-dwmac dt-bindings.
> Patch 6:
> - Moved SOC_STARFIVE to ARCH_STARFIVE in Kconfig.
> - Dropped the _PLAT/_plat from the config/function/struct names. (by Emil)
> - Added MODULE_DEVICE_TABLE() and udev will load the module automatically. (by Emil)
> - Used { /* sentinel */ } for the last entry of starfive_eth_match. (by Emil)
> - Added 'tx_use_rgmii_rxin_clk' to struct starfive_dwmac, to mark the clk_tx'parent is rgmii.
> - Suggested by Emil, dropped clk_gtxclk and use clk_tx_inv to set the clock frequency.
> Patch 5:
> - Suggested by Emil, dropped mdio0/1 labels because there is no reference elsewhere.
> Patch 4:
> - Removed GTXC clk in StarFive-dwmac dt-bindings.
> - Added starfive,tx-use-rgmii-clk item in StarFive-dwmac dt-bindings.
> Patch 3:
> - Added an optional reset single 'ahb' in 'snps,dwmac.yaml', according to
>   stmmac_probe_config_dt/stmmac_dvr_probe.
> Patch 2:
> - No update
> Patch 1:
> - No update
> 
> Changes since v3:
> - Reworded the maxitems number of resets property in 'snps,dwmac.yaml'
> - Removed the unused code in 'dwmac-starfive-plat.c'.
> - Reworded the return statement in 'starfive_eth_plat_fix_mac_speed' function.
> 
> Changes since v2:
> - Renamed the dt-bindings 'starfive,jh71x0-dwmac.yaml' to 'starfive,jh7110-dwmac.yaml'.
> - Reworded the commit messages.
> - Reworded the example context in the dt-binding 'starfive,jh7110-dwmac.yaml'.
> - Removed "starfive,jh7100-dwmac" compatible string and special initialization of jh7100.
> - Removed the parts of YT8531,so dropped patch 5 and 6.
> - Reworded the maxitems number of resets property in 'snps,dwmac.yaml'.
> 
> Changes since v1:
> - Recovered the author of the 1st and 3rd patches back to Emil Renner Berthing.
> - Added a new patch to update maxitems number of resets property in 'snps,dwmac.yaml'.
> - Fixed the check errors reported by "make dt_binding_check".
> - Renamed the dt-binding 'starfive,dwmac-plat.yaml' to 'starfive,jh71x0-dwmac.yaml'.
> - Updated the example context in the dt-binding 'starfive,jh71x0-dwmac.yaml'.
> - Added new dt-binding 'motorcomm,yt8531.yaml' to describe details of phy clock
>   delay configuration parameters.
> - Added more comments for PHY driver setting. For more details, see
>   'motorcomm,yt8531.yaml'.
> - Moved mdio device tree node from 'jh7110-starfive-visionfive-v2.dts' to 'jh7110.dtsi'.
> - Re-worded the commit message of several patches.
> - Renamed all the functions with starfive_eth_plat prefix in 'dwmac-starfive-plat.c'.
> - Added "starfive,jh7100-dwmac" compatible string and special init to support JH7100.
> 
> Previous versions:
> v1 - https://patchwork.kernel.org/project/linux-riscv/cover/20221201090242.2381-1-yanhong.wang@starfivetech.com/
> v2 - https://patchwork.kernel.org/project/linux-riscv/cover/20221216070632.11444-1-yanhong.wang@starfivetech.com/
> v3 - https://patchwork.kernel.org/project/linux-riscv/cover/20230106030001.1952-1-yanhong.wang@starfivetech.com/
> v4 - https://patchwork.kernel.org/project/linux-riscv/cover/20230118061701.30047-1-yanhong.wang@starfivetech.com/
> 
> Emil Renner Berthing (2):
>   dt-bindings: net: snps,dwmac: Add dwmac-5.20 version
>   net: stmmac: platform: Add snps,dwmac-5.20 IP compatible string
> 
> Samin Guo (8):
>   dt-bindings: net: snps,dwmac: Add an optional resets single 'ahb'
>   riscv: dts: starfive: jh7110: Add ethernet device nodes
>   net: stmmac: Add glue layer for StarFive JH7110 SoC
>   dt-bindings: net: starfive,jh7110-dwmac: Add starfive,syscon
>   net: stmmac: starfive_dmac: Add phy interface settings
>   riscv: dts: starfive: jh7110: Add syscon to support phy interface
>     settings
>   riscv: dts: starfive: visionfive-2-v1.3b: Add gmac+phy's delay
>     configuration
>   riscv: dts: starfive: visionfive-2-v1.2a: Add gmac+phy's delay
>     configuration
> 
> Yanhong Wang (2):
>   dt-bindings: net: Add support StarFive dwmac
>   riscv: dts: starfive: visionfive 2: Enable gmac device tree node
> 
>  .../devicetree/bindings/net/snps,dwmac.yaml   |  19 +-
>  .../bindings/net/starfive,jh7110-dwmac.yaml   | 130 +++++++++++++
>  MAINTAINERS                                   |   7 +
>  .../jh7110-starfive-visionfive-2-v1.2a.dts    |  13 ++
>  .../jh7110-starfive-visionfive-2-v1.3b.dts    |  27 +++
>  .../jh7110-starfive-visionfive-2.dtsi         |  10 +
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  93 ++++++++++
>  drivers/net/ethernet/stmicro/stmmac/Kconfig   |  12 ++
>  drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
>  .../ethernet/stmicro/stmmac/dwmac-starfive.c  | 171 ++++++++++++++++++
>  .../ethernet/stmicro/stmmac/stmmac_platform.c |   3 +-
>  11 files changed, 481 insertions(+), 5 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
>  create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
> 
> 
> base-commit: 11934a315b671ddb09bc7ac5f505649e9f2623c7
> prerequisite-patch-id: ad56ef54d3f2a18025abc9e27321c25beda16422
> prerequisite-patch-id: 1be0fb49e0fbe293ca8fa94601e191b13c8c67d9
> prerequisite-patch-id: 8b402a8d97294a9b568595816b0dc96afc5e6f5d
> prerequisite-patch-id: 5c149662674f9e7dd888e2028fd8c9772948273f
> prerequisite-patch-id: 0caf8a313a9f161447e0480a93b42467378b2164
> prerequisite-patch-id: b2422f7a12f1e86e38c563139f3c1dbafc158efd
> prerequisite-patch-id: be612664eca7049e987bfae15bb460caa82eb211
> prerequisite-patch-id: 8300965cc6c55cad69f009da7916cf9e8ce628e7
> -- 
> 2.17.1
>