mbox series

[net-next,0/6] TXGBE PHYLINK support

Message ID 20230403064528.343866-1-jiawenwu@trustnetic.com (mailing list archive)
Headers show
Series TXGBE PHYLINK support | expand

Message

Jiawen Wu April 3, 2023, 6:45 a.m. UTC 
Implement I2C, SFP, GPIO and PHYLINK to setup TXGBE link and switch link
rate based on optical module information.

Jiawen Wu (6):
  net: txgbe: Add software nodes to support phylink
  net: txgbe: Implement I2C bus master driver
  net: txgbe: Add SFP module identify
  net: txgbe: Support GPIO to SFP socket
  net: txgbe: Implement phylink pcs
  net: txgbe: Support phylink MAC layer

 .../device_drivers/ethernet/wangxun/txgbe.rst |  47 +
 drivers/net/ethernet/wangxun/Kconfig          |   5 +
 drivers/net/ethernet/wangxun/libwx/wx_lib.c   |   3 +-
 drivers/net/ethernet/wangxun/libwx/wx_type.h  |   3 +
 drivers/net/ethernet/wangxun/txgbe/Makefile   |   1 +
 .../ethernet/wangxun/txgbe/txgbe_ethtool.c    |  34 +
 drivers/net/ethernet/wangxun/txgbe/txgbe_hw.c |   1 +
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   |  61 +-
 .../net/ethernet/wangxun/txgbe/txgbe_phy.c    | 934 ++++++++++++++++++
 .../net/ethernet/wangxun/txgbe/txgbe_phy.h    |  10 +
 .../net/ethernet/wangxun/txgbe/txgbe_type.h   | 156 +++
 11 files changed, 1223 insertions(+), 32 deletions(-)
 create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
 create mode 100644 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h