mbox series

[net-next,v6,00/16] net: Make timestamping selectable

Message ID 20231019-feature_ptp_netnext-v6-0-71affc27b0e5@bootlin.com (mailing list archive)
Headers show
Series net: Make timestamping selectable | expand

Message

Kory Maincent Oct. 19, 2023, 2:29 p.m. UTC
Up until now, there was no way to let the user select the layer at
which time stamping occurs. The stack assumed that PHY time stamping
is always preferred, but some MAC/PHY combinations were buggy.

This series updates the default MAC/PHY default timestamping and aims to
allow the user to select the desired layer administratively.

Changes in v2:
- Move selected_timestamping_layer variable of the concerned patch.
- Use sysfs_streq instead of strmcmp.
- Use the PHY timestamp only if available.

Changes in v3:
- Expose the PTP choice to ethtool instead of sysfs.
  You can test it with the ethtool source on branch feature_ptp of:
  https://github.com/kmaincent/ethtool
- Added a devicetree binding to select the preferred timestamp.

Changes in v4:
- Move on to ethtool netlink instead of ioctl.
- Add a netdev notifier to allow packet trapping by the MAC in case of PHY
  time stamping.
- Add a PHY whitelist to not break the old PHY default time-stamping
  preference API.

Change in v5:
- Update to ndo_hwstamp_get/set. This bring several new patches.
- Add few patches to make the glue.
- Convert macb to ndo_hwstamp_get/set.
- Add netlink specs description of new ethtool commands.
- Removed netdev notifier.
- Split the patches that expose the timestamping to userspace to separate
  the core and ethtool development.
- Add description of software timestamping.
- Convert PHYs hwtstamp callback to use kernel_hwtstamp_config.

Change in v6:
- Few fixes from the reviews.
- Replace the allowlist to default_timestamp flag to know which phy is
  using old API behavior.
- Rename the timestamping layer enum values.
- Move to a simple enum instead of the mix between enum and bitfield.
- Update ts_info and ts-set in software timestamping case.

Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Kory Maincent (15):
      net: Convert PHYs hwtstamp callback to use kernel_hwtstamp_config
      net: phy: Remove the call to phy_mii_ioctl in phy_hwstamp_get/set
      net: macb: Convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
      net: Make dev_set_hwtstamp_phylib accessible
      net: phy: micrel: fix ts_info value in case of no phc
      net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask
      net: ethtool: Add a command to expose current time stamping layer
      netlink: specs: Introduce new netlink command to get current timestamp
      net: ethtool: Add a command to list available time stamping layers
      netlink: specs: Introduce new netlink command to list available time stamping layers
      net: Replace hwtstamp_source by timestamping layer
      net: Change the API of PHY default timestamp to MAC
      net: ethtool: ts: Update GET_TS to reply the current selected timestamp
      net ethtool: net: Let the active time stamping layer be selectable
      netlink: specs: Introduce time stamping set command

Richard Cochran (1):
      net: ethtool: Refactor identical get_ts_info implementations.

 Documentation/netlink/specs/ethtool.yaml           |  57 +++++
 Documentation/networking/ethtool-netlink.rst       |  63 ++++++
 drivers/net/bonding/bond_main.c                    |  29 +--
 drivers/net/ethernet/cadence/macb.h                |  15 +-
 drivers/net/ethernet/cadence/macb_main.c           |  42 +++-
 drivers/net/ethernet/cadence/macb_ptp.c            |  28 +--
 .../net/ethernet/microchip/lan966x/lan966x_main.c  |   6 +-
 drivers/net/macvlan.c                              |  14 +-
 drivers/net/phy/bcm-phy-ptp.c                      |  18 +-
 drivers/net/phy/dp83640.c                          |  27 +--
 drivers/net/phy/micrel.c                           |  50 ++---
 drivers/net/phy/mscc/mscc_ptp.c                    |  20 +-
 drivers/net/phy/nxp-c45-tja11xx.c                  |  20 +-
 drivers/net/phy/phy.c                              |  28 ++-
 drivers/net/phy/phy_device.c                       |  37 ++++
 drivers/ptp/ptp_ines.c                             |  16 +-
 include/linux/ethtool.h                            |   8 +
 include/linux/mii_timestamper.h                    |   4 +-
 include/linux/net_tstamp.h                         |  11 +-
 include/linux/netdevice.h                          |   8 +
 include/linux/phy.h                                |  10 +-
 include/uapi/linux/ethtool_netlink.h               |  29 +++
 include/uapi/linux/net_tstamp.h                    |  18 ++
 net/8021q/vlan_dev.c                               |  15 +-
 net/core/dev.c                                     |   3 +
 net/core/dev_ioctl.c                               |  43 ++--
 net/core/timestamping.c                            |  10 +
 net/ethtool/Makefile                               |   2 +-
 net/ethtool/common.c                               |  25 ++-
 net/ethtool/common.h                               |   1 +
 net/ethtool/netlink.c                              |  28 +++
 net/ethtool/netlink.h                              |   4 +
 net/ethtool/ts.c                                   | 244 +++++++++++++++++++++
 33 files changed, 732 insertions(+), 201 deletions(-)
---
base-commit: 2b2cd9f2c53ea51bdb28203b91b6d518d88b7e03
change-id: 20231011-feature_ptp_netnext-3f278578e84b

Best regards,