mbox series

[can,v3,0/2] can: m_can: fix struct net_device_ops::{open,stop} callbacks under high bus load

Message ID 20240910-can-m_can-fix-ifup-v3-0-6c1720ba45ce@pengutronix.de (mailing list archive)
Headers show
Series can: m_can: fix struct net_device_ops::{open,stop} callbacks under high bus load | expand

Message

Marc Kleine-Budde Sept. 10, 2024, 5:15 p.m. UTC 
Under high CAN-bus load the struct net_device_ops::{open,stop}
callbacks (m_can_open(), m_can_close()) don't properly start and
shutdown the device.

Fix the problems by re-arranging the order of functions in
m_can_open() and m_can_close().

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
Changes in v3:
- 1/2: m_can_close(), m_can_open(): move location of napi_disable(),
  call can_rx_offload_disable() for peripherals napi_disable()
  otherwise
- 1/2: add Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com>
- Link to v2: https://patch.msgid.link/20240909-can-m_can-fix-ifup-v2-0-2b35e624a089@pengutronix.de

Changes in v2:
- 1/2: split timestamp wraparound changes into separate patch
- 1/2: added "Not-Signed-off-by: Hamby, Jake (US) <Jake.Hamby@Teledyne.com>"
- 2/2: new patch: fix order of clock shutdown
- Link to v1: https://patch.msgid.link/DM8PR14MB5221D9DD3A7F2130EF161AF7EF9E2@DM8PR14MB5221.namprd14.prod.outlook.com

---
Jake Hamby (1):
      can: m_can: enable NAPI before enabling interrupts

Marc Kleine-Budde (1):
      can: m_can: m_can_close(): stop clocks after device has been shut down

 drivers/net/can/m_can/m_can.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
---
base-commit: 48aa361c5db0b380c2b75c24984c0d3e7c1e8c09
change-id: 20240909-can-m_can-fix-ifup-770306ca4aca

Best regards,