mbox series

[v2,0/2] PCI: add enabe(disable)_device() hook for bridge

Message ID 20240930-imx95_lut-v2-0-3b6467ba539a@nxp.com (mailing list archive)
Headers show
Series PCI: add enabe(disable)_device() hook for bridge | expand

Message

Frank Li Sept. 30, 2024, 7:42 p.m. UTC 
Some system's IOMMU stream(master) ID bits(such as 6bits) less than
pci_device_id (16bit). It needs add hardware configuration to enable
pci_device_id to stream ID convert.

https://lore.kernel.org/imx/20240622173849.GA1432357@bhelgaas/
This ways use pcie bus notifier (like apple pci controller), when new PCIe
device added, bus notifier will call register specific callback to handle
look up table (LUT) configuration.

https://lore.kernel.org/imx/20240429150842.GC1709920-robh@kernel.org/
which parse dt's 'msi-map' and 'iommu-map' property to static config LUT
table (qcom use this way). This way is rejected by DT maintainer Rob.

Above ways can resolve LUT take or stream id out of usage the problem. If
there are not enough stream id resource, not error return, EP hardware
still issue DMA to do transfer, which may transfer to wrong possition.

Add enable(disable)_device() hook for bridge can return error when not
enough resource, and PCI device can't enabled.

Basicallly this version can match Bjorn's requirement:
1: simple, because it is rare that there are no LUT resource.
2: EP driver probe failure when no LUT, but lspci can see such device.

[    2.164415] nvme nvme0: pci function 0000:01:00.0
[    2.169142] pci 0000:00:00.0: Error enabling bridge (-1), continuing
[    2.175654] nvme 0000:01:00.0: probe with driver nvme failed with error -12

> lspci
0000:00:00.0 PCI bridge: Philips Semiconductors Device 0000
0000:01:00.0 Non-Volatile memory controller: Micron Technology Inc 2100AI NVMe SSD [Nitro] (rev 03)

To: Bjorn Helgaas <bhelgaas@google.com>
To: Richard Zhu <hongxing.zhu@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>
To: Lorenzo Pieralisi <lpieralisi@kernel.org>
To: Krzysztof Wilczyński <kw@linux.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Rob Herring <robh@kernel.org>
To: Shawn Guo <shawnguo@kernel.org>
To: Sascha Hauer <s.hauer@pengutronix.de>
To: Pengutronix Kernel Team <kernel@pengutronix.de>
To: Fabio Estevam <festevam@gmail.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: imx@lists.linux.dev
Cc: Frank.li@nxp.com \
Cc: alyssa@rosenzweig.io \
Cc: bpf@vger.kernel.org \
Cc: broonie@kernel.org \
Cc: jgg@ziepe.ca \
Cc: joro@8bytes.org \
Cc: l.stach@pengutronix.de \
Cc: lgirdwood@gmail.com \
Cc: maz@kernel.org \
Cc: p.zabel@pengutronix.de \
Cc: robin.murphy@arm.com \
Cc: will@kernel.org \

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v2:
- see each patch
- Link to v1: https://lore.kernel.org/r/20240926-imx95_lut-v1-0-d0c62087dbab@nxp.com

---
Frank Li (2):
      PCI: Add enable_device() and disable_device() callbacks for bridges
      PCI: imx6: Add IOMMU and ITS MSI support for i.MX95

 drivers/pci/controller/dwc/pci-imx6.c | 133 +++++++++++++++++++++++++++++++++-
 drivers/pci/pci.c                     |  14 ++++
 include/linux/pci.h                   |   2 +
 3 files changed, 148 insertions(+), 1 deletion(-)
---
base-commit: 2849622e7b01d5aea1b060ba3955054798c1e0bb
change-id: 20240926-imx95_lut-1c68222e0944

Best regards,
---
Frank Li <Frank.Li@nxp.com>