[net-next,v3,0/8] net: lan969x: add RGMII support

Message

Daniel Machon Nov. 18, 2024, 1 p.m. UTC

== Description:

This series is the fourth of a multi-part series, that prepares and adds
support for the new lan969x switch driver.

The upstreaming efforts is split into multiple series (might change a
bit as we go along):

        1) Prepare the Sparx5 driver for lan969x (merged)

        2) Add support for lan969x (same basic features as Sparx5
           provides excl. FDMA and VCAP, merged).

        3) Add lan969x VCAP functionality (merged).

    --> 4) Add RGMII support.

        5) Add FDMA support.

== RGMII support:

The lan969x switch device includes two RGMII interfaces (port 28 and 29)
supporting data speeds of 1 Gbps, 100 Mbps and 10 Mbps.

Details are in the commit description of the patches.

== Patch breakdown:

Patch #1 does some preparation work.

Patch #2 adds new function: is_port_rgmii() to the match data ops.

Patch #3 uses the is_port_rgmii() in a number of places.

Patch #4 uses the phy_interface_mode_is_rgmii() in a number of places.

Patch #5 adds checks for RGMII PHY modes in sparx5_verify_speeds().

Patch #6 adds registers required to configure RGMII.

Patch #7 adds RGMII implementation.

Patch #8 document RGMII delays.

To: [e-mail]
To: Andrew Lunn <[e-mail]>
To: David S. Miller <[e-mail]>
To: Eric Dumazet <[e-mail]>
To: Jakub Kicinski <[e-mail]>
To: Paolo Abeni <[e-mail]>
To: Lars Povlsen <[e-mail]>
To: Steen Hegelund <[e-mail]>
To: Horatiu Vultur <[e-mail]>
To: Russell King <[e-mail]>
To: [e-mail]
To: [e-mail]
To: [e-mail]
To: [e-mail]
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]
Cc: [e-mail]

Signed-off-by: Daniel Machon <[e-mail]>
---
Changes in v3:

v2 was kindly tested by Robert Marko. Not carrying the tag to v3 since
we have changes to the handling of the delays.

- Modified lan969x_rgmii_delay_config() to not apply any MAC delay when
  the {rx,tx}-internal-delay-ps properties are missing or set to 0
  (patch #7).

- Removed 'required' constraint from {rx-tx}-internal-delay-ps
  properties. Also added description and default value (Patch #8).

- Link to v2: https://lore.kernel.org/r/[e-mail]

Changes in v2:

  Most changes are in patch #7. RGMII implementation has been moved to
  it's own file lan969x_rgmii.c.

  Details:

    - Use ETH_P_8021Q and ETH_P_8021AD instead of the Sparx5 provided
      equivalents (patch #7).
    - Configure MAC delays through "{rx,tx}-internal-delay-ps"
      properties (patch #7).
    - Add selectors for all the phase shifts that the hardware supports
      (instead of only 2.0 ns, patch #7).
    - Add selectors for all the port speeds (instead of only 1000 mbps.)
    - Document RGMII delays in dt-bindings.

  - Link to v1: https://lore.kernel.org/r/[e-mail]

---
Daniel Machon (8):
      net: sparx5: do some preparation work
      net: sparx5: add function for RGMII port check
      net: sparx5: use is_port_rgmii() throughout
      net: sparx5: use phy_interface_mode_is_rgmii()
      net: sparx5: verify RGMII speeds
      net: lan969x: add RGMII registers
      net: lan969x: add RGMII implementation
      dt-bindings: net: sparx5: document RGMII delays

 .../bindings/net/microchip,sparx5-switch.yaml      |  18 ++
 drivers/net/ethernet/microchip/lan969x/Makefile    |   2 +-
 drivers/net/ethernet/microchip/lan969x/lan969x.c   |   5 +
 drivers/net/ethernet/microchip/lan969x/lan969x.h   |  10 +
 .../net/ethernet/microchip/lan969x/lan969x_rgmii.c | 224 +++++++++++++++++++++
 .../net/ethernet/microchip/sparx5/sparx5_main.c    |  29 ++-
 .../net/ethernet/microchip/sparx5/sparx5_main.h    |   3 +
 .../ethernet/microchip/sparx5/sparx5_main_regs.h   | 145 +++++++++++++
 .../net/ethernet/microchip/sparx5/sparx5_phylink.c |   3 +
 .../net/ethernet/microchip/sparx5/sparx5_port.c    |  57 ++++--
 .../net/ethernet/microchip/sparx5/sparx5_port.h    |   5 +
 11 files changed, 473 insertions(+), 28 deletions(-)
---
base-commit: d7ef9eeef0723cc47601923c508ecbebd864f0c0
change-id: 20241104-sparx5-lan969x-switch-driver-4-d59b7820485a

Best regards,