[v2,00/10] DTS updates for system1 BMC

Message

Ninad Palsule Jan. 7, 2025, 4:23 p.m. UTC

Hello,

Please review the patch set.

V2:
---
  Fixed CHECK_DTBS errors by
    - Using generic node names
    - Documenting phy-mode rgmii-rxid in ftgmac100.yaml
    - Adding binding documentation for IPMB device interface

NINAD PALSULE (7):
  ARM: dts: aspeed: system1: Add IPMB device
  ARM: dts: aspeed: system1: Add GPIO line name
  ARM: dts: aspeed: system1: Add RGMII support
  ARM: dts: aspeed: system1: Reduce sgpio speed
  ARM: dts: aspeed: system1: Update LED gpio name
  ARM: dts: aspeed: system1: Remove VRs max8952
  ARM: dts: aspeed: system1: Mark GPIO line high/low

Ninad Palsule (3):
  dt-bindings: net: faraday,ftgmac100: Add phys mode
  bindings: ipmi: Add binding for IPMB device intf
  ARM: dts: aspeed: system1: Disable gpio pull down

 .../devicetree/bindings/ipmi/ipmb-dev.yaml    |  42 +++++
 .../bindings/net/faraday,ftgmac100.yaml       |   3 +
 .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 177 ++++++++++++------
 3 files changed, 163 insertions(+), 59 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml

Comments

Rob Herring Jan. 7, 2025, 10:54 p.m. UTC | #1

On Tue, 07 Jan 2025 10:23:37 -0600, Ninad Palsule wrote:
> Hello,
> 
> Please review the patch set.
> 
> V2:
> ---
>   Fixed CHECK_DTBS errors by
>     - Using generic node names
>     - Documenting phy-mode rgmii-rxid in ftgmac100.yaml
>     - Adding binding documentation for IPMB device interface
> 
> NINAD PALSULE (7):
>   ARM: dts: aspeed: system1: Add IPMB device
>   ARM: dts: aspeed: system1: Add GPIO line name
>   ARM: dts: aspeed: system1: Add RGMII support
>   ARM: dts: aspeed: system1: Reduce sgpio speed
>   ARM: dts: aspeed: system1: Update LED gpio name
>   ARM: dts: aspeed: system1: Remove VRs max8952
>   ARM: dts: aspeed: system1: Mark GPIO line high/low
> 
> Ninad Palsule (3):
>   dt-bindings: net: faraday,ftgmac100: Add phys mode
>   bindings: ipmi: Add binding for IPMB device intf
>   ARM: dts: aspeed: system1: Disable gpio pull down
> 
>  .../devicetree/bindings/ipmi/ipmb-dev.yaml    |  42 +++++
>  .../bindings/net/faraday,ftgmac100.yaml       |   3 +
>  .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 177 ++++++++++++------
>  3 files changed, 163 insertions(+), 59 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
> 
> --
> 2.43.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-system1.dtb' for [e-mail]:

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dtb: gpio@1e780000: 'hog-0', 'hog-1', 'hog-2', 'hog-3' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#