| Message ID | cover.1723014611.git.siyanteng@loongson.cn (mailing list archive) |
|---|---|
| Headers | show |
| Series | stmmac: Add Loongson platform support | expand |
Hi Yanteng On Wed, Aug 07, 2024 at 09:45:27PM +0800, Yanteng Si wrote: > v17: > * As Serge's comments: > Add return 0 for _dt_config(). > Get back the conditional MSI-clear method execution. Thank you very much for your patience in such a long review and firm determination to bring the series to the final goal. From my point of view the patch set is ready to be merged in. I've got it tested on my relatively standard DW GMAC v3.73a controller. No immediate problems or impacts on the interface performance have been spotted. So for the entire series: Tested-by: Serge Semin <fancer.lancer@gmail.com> -Serge(y) > > v16: > * As Serge's comments: > Move the of_node_put(plat->mdio_node) call to the DT-config/clear methods. > Drop 'else if'. > * Modify the commit message of 7/14. (LS2K CPU -> LS2K SOC) > > V15: > * Drop return that will not be executed. > * Move pdev from patch 12 to patch 13 to pass W=1 builds. > > RFC v15: > * As Serge's comments: > Extend the commit message.(patch 7 and patch 11) > Add fixes tag for patch 8. > Add loongson_dwmac_dt_clear() patch. > Modify loongson_dwmac_msi_config(). > ... > * Pick Huacai's Acked-by tag. > * Pick Serge's Reviewed-by tag. > * I have already contacted the author(ZhangQing) of the module, > so I copied her valid email: diasyzhang@tencent.com. > > Note: > I replied to the comments on v14 last Sunday, but all of Loongson's > email servers failed to deliver. The network administrator told me > today that he has fixed the problem and re-delivered all the failed > emails, but I did not see them on the mailing list. I hope they will > not suddenly appear in everyone's mailbox one day. I apologize for > this. (The email content mainly agrees with Serge's suggestion.) > > v14: > > Because Loongson GMAC can be also found with the 8-channels AV feature > enabled, we'll need to reconsider the patches logic and thus the > commit logs too. As Serge's comments and Russell's comments: > [PATCH net-next v14 01/15] net: stmmac: Move the atds flag to the stmmac_dma_cfg structure > [PATCH net-next v14 02/15] net: stmmac: Add multi-channel support > [PATCH net-next v14 03/15] net: stmmac: Export dwmac1000_dma_ops > [PATCH net-next v14 04/15] net: stmmac: dwmac-loongson: Drop duplicated hash-based filter size init > [PATCH net-next v14 05/15] net: stmmac: dwmac-loongson: Drop pci_enable/disable_msi calls > [PATCH net-next v14 06/15] net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device identification > [PATCH net-next v14 07/15] net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init > +-> Init the plat_stmmacenet_data::{tx_queues_to_use,rx_queues_to_use} > in the loongson_gmac_data() method. > [PATCH net-next v14 08/15] net: stmmac: dwmac-loongson: Init ref and PTP clocks rate > [PATCH net-next v14 09/15] net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC > [PATCH net-next v14 10/15] net: stmmac: dwmac-loongson: Introduce PCI device info data > +-> Make sure the setup() method is called after the pci_enable_device() > invocation. > [PATCH net-next v14 11/15] net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support > +-> Introduce the loongson_dwmac_dt_config() method here instead of > doing that in a separate patch. > +-> Add loongson_dwmac_acpi_config() which would just get the IRQ from > the pdev->irq field and make sure it is valid. > [PATCH net-next v14 12/15] net: stmmac: Fixed failure to set network speed to 1000. > +-> Drop the patch as Russell's comments, At the same time, he provided another > better repair suggestion, and I decided to send it separately after the > patch set was merged. See: > <https://lore.kernel.org/netdev/ZoW1fNqV3PxEobFx@shell.armlinux.org.uk/> > [PATCH net-next v14 13/15] net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support > +-> This is former "net: stmmac: dwmac-loongson: Add Loongson GNET > support" patch, but which adds the support of the Loongson GMAC with the > 8-channels AV-feature available. > +-> loongson_dwmac_intx_config() shall be dropped due to the > loongson_dwmac_acpi_config() method added in the PATCH 11/15. > +-> Make sure loongson_data::loongson_id is initialized before the > stmmac_pci_info::setup() is called. > +-> Move the rx_queues_to_use/tx_queues_to_use and coe_unsupported > fields initialization to the loongson_gmac_data() method. > +-> As before, call the loongson_dwmac_msi_config() method if the multi-channels > Loongson MAC has been detected. > +-> Move everything GNET-specific to the next patch. > [PATCH net-next v14 14/15] net: stmmac: dwmac-loongson: Add Loongson GNET support > +-> Everything Loonsgson GNET-specific is supposed to be added in the > framework of this patch: > + PCI_DEVICE_ID_LOONGSON_GNET macro > + loongson_gnet_fix_speed() method > + loongson_gnet_data() method > + loongson_gnet_pci_info data > + The GNET-specific part of the loongson_dwmac_setup() method. > + ... > [PATCH net-next v14 15/15] net: stmmac: dwmac-loongson: Add loongson module author > > Other's: > Pick Serge's Reviewed-by tag. > > v13: > > * Sorry, we have clarified some things in the past 10 days. I did not > give you a clear reply to the following questions in v12, so I need > to reply again: > > 1. The current LS2K2000 also have a GMAC(and two GNET) that supports 8 > channels, so we have to reconsider the initialization of > tx/rx_queues_to_use into probe(); > > 2. In v12, we disagreed on the loongson_dwmac_msi_config method, but I changed > it based on Serge's comments(If I understand correctly): > if (dev_of_node(&pdev->dev)) { > ret = loongson_dwmac_dt_config(pdev, plat, &res); > } > > if (ld->loongson_id == DWMAC_CORE_LS2K2000) { > ret = loongson_dwmac_msi_config(pdev, plat, &res); > } else { > ret = loongson_dwmac_intx_config(pdev, plat, &res); > } > > 3. Our priv->dma_cap.pcs is false, so let's use PHY_INTERFACE_MODE_NA; > > 4. Our GMAC does not support Delay, so let's use PHY_INTERFACE_MODE_RGMII_ID, > the current dts is wrong, a fix patch will be sent to the LoongArch list > later. > > Others: > * Re-split a part of the patch (it seems we do this with every version); > * Copied Serge's comments into the commit message of patch; > * Fixed the stmmac_dma_operation_mode() method; > * Changed some code comments. > > v12: > * The biggest change is the re-splitting of patches. > * Add a "gmac_version" in loongson_data, then we only > read it once in the _probe(). > * Drop Serge's patch. > * Rebase to the latest code state. > * Fixed the gnet commit message. > > v11: > * Break loongson_phylink_get_caps(), fix bad logic. > * Remove a unnecessary ";". > * Remove some unnecessary "{}". > * add a blank. > * Move the code of fix _force_1000 to patch 6/6. > > The main changes occur in these two functions: > loongson_dwmac_probe(); > loongson_dwmac_setup(); > > v10: > As Andrew's comment: > * Add a #define for the 0x37. > * Add a #define for Port Select. > > others: > * Pick Serge's patch, This patch resulted from the process > of reviewing our patch set. > * Based on Serge's patch, modify our loongson_phylink_get_caps(). > * Drop patch 3/6, we need mac_interface. > * Adjusted the code layout of gnet patch. > * Corrected several errata in commit message. > * Move DISABLE_FORCE flag to loongson_gnet_data(). > > v9: > We have not provided a detailed list of equipment for a long time, > and I apologize for this. During this period, I have collected some > information and now present it to you, hoping to alleviate the pressure > of review. > > 1. IP core > We now have two types of IP cores, one is 0x37, similar to dwmac1000; > The other is 0x10. Compared to 0x37, we split several DMA registers > from one to two, and it is not worth adding a new entry for this. > According to Serge's comment, we made these devices work by overwriting > priv->synopsys_id = 0x37 and mac->dma = <LS_dma_ops>. > > 1.1. Some more detailed information > The number of DMA channels for 0x37 is 1; The number of DMA channels > for 0x10 is 8. Except for channel 0, otherchannels do not support > sending hardware checksums. Supported AV features are Qav, Qat, and Qas, > and the rest are consistent with 3.73. > > 2. DEVICE > We have two types of devices, > one is GMAC, which only has a MAC chip inside and needs an external PHY > chip; > the other is GNET, which integrates both MAC and PHY chips inside. > > 2.1. Some more detailed information > GMAC device: LS7A1000, LS2K1000, these devices do not support any pause > mode. > gnet device: LS7A2000, LS2K2000, the chip connection between the mac and > phy of these devices is not normal and requires two rounds of > negotiation; LS7A2000 does not support half-duplex and > multi-channel; > to enable multi-channel on LS2K2000, you need to turn off > hardware checksum. > **Note**: Only the LS2K2000's IP core is 0x10, while the IP cores of other > devices are 0x37. > > 3. TABLE > > device type pci_id ip_core > ls7a1000 gmac 7a03 0x35/0x37 > ls2k1000 gmac 7a03 0x35/0x37 > ls7a2000 gnet 7a13 0x37 > ls2k2000 gnet 7a13 0x10 > ----------------------------------------------- > Changes: > > * passed the CI > <https://github.com/linux-netdev/nipa/blob/main/tests/patch/checkpatch > /checkpatch.sh> > * reverse xmas tree order. > * Silence build warning. > * Re-split the patch. > * Add more detailed commit message. > * Add more code comment. > * Reduce modification of generic code. > * using the GNET-specific prefix. > * define a new macro for the GNET MAC. > * Use an easier way to overwrite mac. > * Removed some useless printk. > > > v8: > * The biggest change is according to Serge's comment in the previous > edition: > Seeing the patch in the current state would overcomplicate the generic > code and the only functions you need to update are > dwmac_dma_interrupt() > dwmac1000_dma_init_channel() > you can have these methods re-defined with all the Loongson GNET > specifics in the low-level platform driver (dwmac-loongson.c). After > that you can just override the mac_device_info.dma pointer with a > fixed stmmac_dma_ops descriptor. Here is what should be done for that: > > 1. Keep the Patch 4/9 with my comments fixed. First it will be partly > useful for your GNET device. Second in general it's a correct > implementation of the normal DW GMAC v3.x multi-channels feature and > will be useful for the DW GMACs with that feature enabled. > > 2. Create the Loongson GNET-specific > stmmac_dma_ops.dma_interrupt() > stmmac_dma_ops.init_chan() > methods in the dwmac-loongson.c driver. Don't forget to move all the > Loongson-specific macros from dwmac_dma.h to dwmac-loongson.c. > > 3. Create a Loongson GNET-specific platform setup method with the next > semantics: > + allocate stmmac_dma_ops instance and initialize it with > dwmac1000_dma_ops. > + override the stmmac_dma_ops.{dma_interrupt, init_chan} with > the pointers to the methods defined in 2. > + allocate mac_device_info instance and initialize the > mac_device_info.dma field with a pointer to the new > stmmac_dma_ops instance. > + call dwmac1000_setup() or initialize mac_device_info in a way > it's done in dwmac1000_setup() (the later might be better so you > wouldn't need to export the dwmac1000_setup() function). > + override stmmac_priv.synopsys_id with a correct value. > > 4. Initialize plat_stmmacenet_data.setup() with the pointer to the > method created in 3. > > * Others: > Re-split the patch. > Passed checkpatch.pl test. > > v7: > * Refer to andrew's suggestion: > - Add DMA_INTR_ENA_NIE_RX and DMA_INTR_ENA_NIE_TX #define's, etc. > > * Others: > - Using --subject-prefix="PATCH net-next vN" to indicate that the > patches are for the networking tree. > - Rebase to the latest networking tree: > <git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git> > > > v6: > > * Refer to Serge's suggestion: > - Add new platform feature flag: > include/linux/stmmac.h: > +#define STMMAC_FLAG_HAS_LGMAC BIT(13) > > - Add the IRQs macros specific to the Loongson Multi-channels GMAC: > drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h: > +#define DMA_INTR_ENA_NIE_LOONGSON 0x00060000 /* ...*/ > #define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */ > ... > > - Drop all of redundant changes that don't require the > prototypes being converted to accepting the stmmac_priv > pointer. > > * Refer to andrew's suggestion: > - Drop white space changes. > - break patch up into lots of smaller parts. > Some small patches have been put into another series as a preparation > see <https://lore.kernel.org/loongarch/cover.1702289232.git.siyanteng@loongson.cn/T/#t> > > *note* : This series of patches relies on the three small patches above. > * others > - Drop irq_flags changes. > - Changed patch order. > > > v4 -> v5: > > * Remove an ugly and useless patch (fix channel number). > * Remove the non-standard dma64 driver code, and also remove > the HWIF entries, since the associated custom callbacks no > longer exist. > * Refer to Serge's suggestion: Update the dwmac1000_dma.c to > support the multi-DMA-channels controller setup. > > See: > v4: <https://lore.kernel.org/loongarch/cover.1692696115.git.chenfeiyang@loongson.cn/> > v3: <https://lore.kernel.org/loongarch/cover.1691047285.git.chenfeiyang@loongson.cn/> > v2: <https://lore.kernel.org/loongarch/cover.1690439335.git.chenfeiyang@loongson.cn/> > v1: <https://lore.kernel.org/loongarch/cover.1689215889.git.chenfeiyang@loongson.cn/> > > Yanteng Si (14): > net: stmmac: Move the atds flag to the stmmac_dma_cfg structure > net: stmmac: Add multi-channel support > net: stmmac: Export dwmac1000_dma_ops > net: stmmac: dwmac-loongson: Drop duplicated hash-based filter size > init > net: stmmac: dwmac-loongson: Drop pci_enable/disable_msi calls > net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device > identification > net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init > net: stmmac: dwmac-loongson: Init ref and PTP clocks rate > net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC > net: stmmac: dwmac-loongson: Introduce PCI device info data > net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support > net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support > net: stmmac: dwmac-loongson: Add Loongson GNET support > net: stmmac: dwmac-loongson: Add loongson module author > > drivers/net/ethernet/stmicro/stmmac/common.h | 1 + > .../ethernet/stmicro/stmmac/dwmac-loongson.c | 597 +++++++++++++++--- > .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 4 +- > .../ethernet/stmicro/stmmac/dwmac1000_dma.c | 35 +- > .../ethernet/stmicro/stmmac/dwmac100_dma.c | 2 +- > .../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +- > .../net/ethernet/stmicro/stmmac/dwmac_dma.h | 27 +- > .../net/ethernet/stmicro/stmmac/dwmac_lib.c | 30 +- > .../ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 +- > drivers/net/ethernet/stmicro/stmmac/hwif.h | 5 +- > .../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +- > include/linux/stmmac.h | 1 + > 12 files changed, 605 insertions(+), 120 deletions(-) > > -- > 2.31.4 >
Hello: This series was applied to netdev/net-next.git (main) by Paolo Abeni <pabeni@redhat.com>: On Wed, 7 Aug 2024 21:45:27 +0800 you wrote: > v17: > * As Serge's comments: > Add return 0 for _dt_config(). > Get back the conditional MSI-clear method execution. > > v16: > * As Serge's comments: > Move the of_node_put(plat->mdio_node) call to the DT-config/clear methods. > Drop 'else if'. > * Modify the commit message of 7/14. (LS2K CPU -> LS2K SOC) > > [...] Here is the summary with links: - [net-next,v17,01/14] net: stmmac: Move the atds flag to the stmmac_dma_cfg structure https://git.kernel.org/netdev/net-next/c/12dbc67c3b0b - [net-next,v17,02/14] net: stmmac: Add multi-channel support https://git.kernel.org/netdev/net-next/c/ad72f783de06 - [net-next,v17,03/14] net: stmmac: Export dwmac1000_dma_ops https://git.kernel.org/netdev/net-next/c/005c0f071bc1 - [net-next,v17,04/14] net: stmmac: dwmac-loongson: Drop duplicated hash-based filter size init https://git.kernel.org/netdev/net-next/c/393ea68bf154 - [net-next,v17,05/14] net: stmmac: dwmac-loongson: Drop pci_enable/disable_msi calls https://git.kernel.org/netdev/net-next/c/0c979e6b55f9 - [net-next,v17,06/14] net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device identification https://git.kernel.org/netdev/net-next/c/324d96b46520 - [net-next,v17,07/14] net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init https://git.kernel.org/netdev/net-next/c/79afc70002c2 - [net-next,v17,08/14] net: stmmac: dwmac-loongson: Init ref and PTP clocks rate https://git.kernel.org/netdev/net-next/c/c70f31636813 - [net-next,v17,09/14] net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC https://git.kernel.org/netdev/net-next/c/849dc7341d1f - [net-next,v17,10/14] net: stmmac: dwmac-loongson: Introduce PCI device info data https://git.kernel.org/netdev/net-next/c/0ec04d32b5e7 - [net-next,v17,11/14] net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support https://git.kernel.org/netdev/net-next/c/126f4f96c41d - [net-next,v17,12/14] net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support https://git.kernel.org/netdev/net-next/c/803fc61df261 - [net-next,v17,13/14] net: stmmac: dwmac-loongson: Add Loongson GNET support https://git.kernel.org/netdev/net-next/c/56dbe2c290bc - [net-next,v17,14/14] net: stmmac: dwmac-loongson: Add loongson module author https://git.kernel.org/netdev/net-next/c/930df0990d06 You are awesome, thank you!
v17: * As Serge's comments: Add return 0 for _dt_config(). Get back the conditional MSI-clear method execution. v16: * As Serge's comments: Move the of_node_put(plat->mdio_node) call to the DT-config/clear methods. Drop 'else if'. * Modify the commit message of 7/14. (LS2K CPU -> LS2K SOC) V15: * Drop return that will not be executed. * Move pdev from patch 12 to patch 13 to pass W=1 builds. RFC v15: * As Serge's comments: Extend the commit message.(patch 7 and patch 11) Add fixes tag for patch 8. Add loongson_dwmac_dt_clear() patch. Modify loongson_dwmac_msi_config(). ... * Pick Huacai's Acked-by tag. * Pick Serge's Reviewed-by tag. * I have already contacted the author(ZhangQing) of the module, so I copied her valid email: diasyzhang@tencent.com. Note: I replied to the comments on v14 last Sunday, but all of Loongson's email servers failed to deliver. The network administrator told me today that he has fixed the problem and re-delivered all the failed emails, but I did not see them on the mailing list. I hope they will not suddenly appear in everyone's mailbox one day. I apologize for this. (The email content mainly agrees with Serge's suggestion.) v14: Because Loongson GMAC can be also found with the 8-channels AV feature enabled, we'll need to reconsider the patches logic and thus the commit logs too. As Serge's comments and Russell's comments: [PATCH net-next v14 01/15] net: stmmac: Move the atds flag to the stmmac_dma_cfg structure [PATCH net-next v14 02/15] net: stmmac: Add multi-channel support [PATCH net-next v14 03/15] net: stmmac: Export dwmac1000_dma_ops [PATCH net-next v14 04/15] net: stmmac: dwmac-loongson: Drop duplicated hash-based filter size init [PATCH net-next v14 05/15] net: stmmac: dwmac-loongson: Drop pci_enable/disable_msi calls [PATCH net-next v14 06/15] net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device identification [PATCH net-next v14 07/15] net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init +-> Init the plat_stmmacenet_data::{tx_queues_to_use,rx_queues_to_use} in the loongson_gmac_data() method. [PATCH net-next v14 08/15] net: stmmac: dwmac-loongson: Init ref and PTP clocks rate [PATCH net-next v14 09/15] net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC [PATCH net-next v14 10/15] net: stmmac: dwmac-loongson: Introduce PCI device info data +-> Make sure the setup() method is called after the pci_enable_device() invocation. [PATCH net-next v14 11/15] net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support +-> Introduce the loongson_dwmac_dt_config() method here instead of doing that in a separate patch. +-> Add loongson_dwmac_acpi_config() which would just get the IRQ from the pdev->irq field and make sure it is valid. [PATCH net-next v14 12/15] net: stmmac: Fixed failure to set network speed to 1000. +-> Drop the patch as Russell's comments, At the same time, he provided another better repair suggestion, and I decided to send it separately after the patch set was merged. See: <https://lore.kernel.org/netdev/ZoW1fNqV3PxEobFx@shell.armlinux.org.uk/> [PATCH net-next v14 13/15] net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support +-> This is former "net: stmmac: dwmac-loongson: Add Loongson GNET support" patch, but which adds the support of the Loongson GMAC with the 8-channels AV-feature available. +-> loongson_dwmac_intx_config() shall be dropped due to the loongson_dwmac_acpi_config() method added in the PATCH 11/15. +-> Make sure loongson_data::loongson_id is initialized before the stmmac_pci_info::setup() is called. +-> Move the rx_queues_to_use/tx_queues_to_use and coe_unsupported fields initialization to the loongson_gmac_data() method. +-> As before, call the loongson_dwmac_msi_config() method if the multi-channels Loongson MAC has been detected. +-> Move everything GNET-specific to the next patch. [PATCH net-next v14 14/15] net: stmmac: dwmac-loongson: Add Loongson GNET support +-> Everything Loonsgson GNET-specific is supposed to be added in the framework of this patch: + PCI_DEVICE_ID_LOONGSON_GNET macro + loongson_gnet_fix_speed() method + loongson_gnet_data() method + loongson_gnet_pci_info data + The GNET-specific part of the loongson_dwmac_setup() method. + ... [PATCH net-next v14 15/15] net: stmmac: dwmac-loongson: Add loongson module author Other's: Pick Serge's Reviewed-by tag. v13: * Sorry, we have clarified some things in the past 10 days. I did not give you a clear reply to the following questions in v12, so I need to reply again: 1. The current LS2K2000 also have a GMAC(and two GNET) that supports 8 channels, so we have to reconsider the initialization of tx/rx_queues_to_use into probe(); 2. In v12, we disagreed on the loongson_dwmac_msi_config method, but I changed it based on Serge's comments(If I understand correctly): if (dev_of_node(&pdev->dev)) { ret = loongson_dwmac_dt_config(pdev, plat, &res); } if (ld->loongson_id == DWMAC_CORE_LS2K2000) { ret = loongson_dwmac_msi_config(pdev, plat, &res); } else { ret = loongson_dwmac_intx_config(pdev, plat, &res); } 3. Our priv->dma_cap.pcs is false, so let's use PHY_INTERFACE_MODE_NA; 4. Our GMAC does not support Delay, so let's use PHY_INTERFACE_MODE_RGMII_ID, the current dts is wrong, a fix patch will be sent to the LoongArch list later. Others: * Re-split a part of the patch (it seems we do this with every version); * Copied Serge's comments into the commit message of patch; * Fixed the stmmac_dma_operation_mode() method; * Changed some code comments. v12: * The biggest change is the re-splitting of patches. * Add a "gmac_version" in loongson_data, then we only read it once in the _probe(). * Drop Serge's patch. * Rebase to the latest code state. * Fixed the gnet commit message. v11: * Break loongson_phylink_get_caps(), fix bad logic. * Remove a unnecessary ";". * Remove some unnecessary "{}". * add a blank. * Move the code of fix _force_1000 to patch 6/6. The main changes occur in these two functions: loongson_dwmac_probe(); loongson_dwmac_setup(); v10: As Andrew's comment: * Add a #define for the 0x37. * Add a #define for Port Select. others: * Pick Serge's patch, This patch resulted from the process of reviewing our patch set. * Based on Serge's patch, modify our loongson_phylink_get_caps(). * Drop patch 3/6, we need mac_interface. * Adjusted the code layout of gnet patch. * Corrected several errata in commit message. * Move DISABLE_FORCE flag to loongson_gnet_data(). v9: We have not provided a detailed list of equipment for a long time, and I apologize for this. During this period, I have collected some information and now present it to you, hoping to alleviate the pressure of review. 1. IP core We now have two types of IP cores, one is 0x37, similar to dwmac1000; The other is 0x10. Compared to 0x37, we split several DMA registers from one to two, and it is not worth adding a new entry for this. According to Serge's comment, we made these devices work by overwriting priv->synopsys_id = 0x37 and mac->dma = <LS_dma_ops>. 1.1. Some more detailed information The number of DMA channels for 0x37 is 1; The number of DMA channels for 0x10 is 8. Except for channel 0, otherchannels do not support sending hardware checksums. Supported AV features are Qav, Qat, and Qas, and the rest are consistent with 3.73. 2. DEVICE We have two types of devices, one is GMAC, which only has a MAC chip inside and needs an external PHY chip; the other is GNET, which integrates both MAC and PHY chips inside. 2.1. Some more detailed information GMAC device: LS7A1000, LS2K1000, these devices do not support any pause mode. gnet device: LS7A2000, LS2K2000, the chip connection between the mac and phy of these devices is not normal and requires two rounds of negotiation; LS7A2000 does not support half-duplex and multi-channel; to enable multi-channel on LS2K2000, you need to turn off hardware checksum. **Note**: Only the LS2K2000's IP core is 0x10, while the IP cores of other devices are 0x37. 3. TABLE device type pci_id ip_core ls7a1000 gmac 7a03 0x35/0x37 ls2k1000 gmac 7a03 0x35/0x37 ls7a2000 gnet 7a13 0x37 ls2k2000 gnet 7a13 0x10 ----------------------------------------------- Changes: * passed the CI <https://github.com/linux-netdev/nipa/blob/main/tests/patch/checkpatch /checkpatch.sh> * reverse xmas tree order. * Silence build warning. * Re-split the patch. * Add more detailed commit message. * Add more code comment. * Reduce modification of generic code. * using the GNET-specific prefix. * define a new macro for the GNET MAC. * Use an easier way to overwrite mac. * Removed some useless printk. v8: * The biggest change is according to Serge's comment in the previous edition: Seeing the patch in the current state would overcomplicate the generic code and the only functions you need to update are dwmac_dma_interrupt() dwmac1000_dma_init_channel() you can have these methods re-defined with all the Loongson GNET specifics in the low-level platform driver (dwmac-loongson.c). After that you can just override the mac_device_info.dma pointer with a fixed stmmac_dma_ops descriptor. Here is what should be done for that: 1. Keep the Patch 4/9 with my comments fixed. First it will be partly useful for your GNET device. Second in general it's a correct implementation of the normal DW GMAC v3.x multi-channels feature and will be useful for the DW GMACs with that feature enabled. 2. Create the Loongson GNET-specific stmmac_dma_ops.dma_interrupt() stmmac_dma_ops.init_chan() methods in the dwmac-loongson.c driver. Don't forget to move all the Loongson-specific macros from dwmac_dma.h to dwmac-loongson.c. 3. Create a Loongson GNET-specific platform setup method with the next semantics: + allocate stmmac_dma_ops instance and initialize it with dwmac1000_dma_ops. + override the stmmac_dma_ops.{dma_interrupt, init_chan} with the pointers to the methods defined in 2. + allocate mac_device_info instance and initialize the mac_device_info.dma field with a pointer to the new stmmac_dma_ops instance. + call dwmac1000_setup() or initialize mac_device_info in a way it's done in dwmac1000_setup() (the later might be better so you wouldn't need to export the dwmac1000_setup() function). + override stmmac_priv.synopsys_id with a correct value. 4. Initialize plat_stmmacenet_data.setup() with the pointer to the method created in 3. * Others: Re-split the patch. Passed checkpatch.pl test. v7: * Refer to andrew's suggestion: - Add DMA_INTR_ENA_NIE_RX and DMA_INTR_ENA_NIE_TX #define's, etc. * Others: - Using --subject-prefix="PATCH net-next vN" to indicate that the patches are for the networking tree. - Rebase to the latest networking tree: <git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git> v6: * Refer to Serge's suggestion: - Add new platform feature flag: include/linux/stmmac.h: +#define STMMAC_FLAG_HAS_LGMAC BIT(13) - Add the IRQs macros specific to the Loongson Multi-channels GMAC: drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h: +#define DMA_INTR_ENA_NIE_LOONGSON 0x00060000 /* ...*/ #define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */ ... - Drop all of redundant changes that don't require the prototypes being converted to accepting the stmmac_priv pointer. * Refer to andrew's suggestion: - Drop white space changes. - break patch up into lots of smaller parts. Some small patches have been put into another series as a preparation see <https://lore.kernel.org/loongarch/cover.1702289232.git.siyanteng@loongson.cn/T/#t> *note* : This series of patches relies on the three small patches above. * others - Drop irq_flags changes. - Changed patch order. v4 -> v5: * Remove an ugly and useless patch (fix channel number). * Remove the non-standard dma64 driver code, and also remove the HWIF entries, since the associated custom callbacks no longer exist. * Refer to Serge's suggestion: Update the dwmac1000_dma.c to support the multi-DMA-channels controller setup. See: v4: <https://lore.kernel.org/loongarch/cover.1692696115.git.chenfeiyang@loongson.cn/> v3: <https://lore.kernel.org/loongarch/cover.1691047285.git.chenfeiyang@loongson.cn/> v2: <https://lore.kernel.org/loongarch/cover.1690439335.git.chenfeiyang@loongson.cn/> v1: <https://lore.kernel.org/loongarch/cover.1689215889.git.chenfeiyang@loongson.cn/> Yanteng Si (14): net: stmmac: Move the atds flag to the stmmac_dma_cfg structure net: stmmac: Add multi-channel support net: stmmac: Export dwmac1000_dma_ops net: stmmac: dwmac-loongson: Drop duplicated hash-based filter size init net: stmmac: dwmac-loongson: Drop pci_enable/disable_msi calls net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device identification net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init net: stmmac: dwmac-loongson: Init ref and PTP clocks rate net: stmmac: dwmac-loongson: Add phy_interface for Loongson GMAC net: stmmac: dwmac-loongson: Introduce PCI device info data net: stmmac: dwmac-loongson: Add DT-less GMAC PCI-device support net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support net: stmmac: dwmac-loongson: Add Loongson GNET support net: stmmac: dwmac-loongson: Add loongson module author drivers/net/ethernet/stmicro/stmmac/common.h | 1 + .../ethernet/stmicro/stmmac/dwmac-loongson.c | 597 +++++++++++++++--- .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 4 +- .../ethernet/stmicro/stmmac/dwmac1000_dma.c | 35 +- .../ethernet/stmicro/stmmac/dwmac100_dma.c | 2 +- .../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +- .../net/ethernet/stmicro/stmmac/dwmac_dma.h | 27 +- .../net/ethernet/stmicro/stmmac/dwmac_lib.c | 30 +- .../ethernet/stmicro/stmmac/dwxgmac2_dma.c | 2 +- drivers/net/ethernet/stmicro/stmmac/hwif.h | 5 +- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +- include/linux/stmmac.h | 1 + 12 files changed, 605 insertions(+), 120 deletions(-)