diff mbox series

[v5,5/9] net: stmmac: dwmac-loongson: Add full PCI support

Message ID 0e9dd61f05571b01de369e449106db3ac2dd56da.1699533745.git.siyanteng@loongson.cn (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series stmmac: Add Loongson platform support | expand

Checks

Context Check Description
netdev/series_format warning Target tree name not specified in the subject
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1134 this patch: 1134
netdev/cc_maintainers warning 7 maintainers not CCed: linux-arm-kernel@lists.infradead.org edumazet@google.com pabeni@redhat.com kuba@kernel.org linux-stm32@st-md-mailman.stormreply.com richardcochran@gmail.com mcoquelin.stm32@gmail.com
netdev/build_clang success Errors and warnings before: 1161 this patch: 1161
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1161 this patch: 1161
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 116 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Yanteng Si Nov. 10, 2023, 9:27 a.m. UTC 
Current dwmac-loongson only support LS2K in the "probed with PCI and
configured with DT" manner. Add LS7A support on which the devices are
fully PCI (non-DT).

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
---
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 79 ++++++++++---------
 1 file changed, 43 insertions(+), 36 deletions(-)

Comments

Andrew Lunn Nov. 11, 2023, 8:24 p.m. UTC | #1 
> -	res.irq = of_irq_get_byname(np, "macirq");
> -	if (res.irq < 0) {
> -		dev_err(&pdev->dev, "IRQ macirq not found\n");
> -		ret = -ENODEV;
> -		goto err_disable_msi;
> -	}
> -
> -	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
> -	if (res.wol_irq < 0) {
> -		dev_info(&pdev->dev,
> -			 "IRQ eth_wake_irq not found, using macirq\n");
> -		res.wol_irq = res.irq;
> -	}
> -
> -	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
> -	if (res.lpi_irq < 0) {
> -		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
> -		ret = -ENODEV;
> -		goto err_disable_msi;
> +	if (np) {
> +		res.irq = of_irq_get_byname(np, "macirq");
> +		if (res.irq < 0) {
> +			dev_err(&pdev->dev, "IRQ macirq not found\n");
> +			ret = -ENODEV;
> +			goto err_disable_msi;
> +		}
> +
> +		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
> +		if (res.wol_irq < 0) {
> +			dev_info(&pdev->dev,
> +				 "IRQ eth_wake_irq not found, using macirq\n");
> +			res.wol_irq = res.irq;
> +		}
> +
> +		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
> +		if (res.lpi_irq < 0) {
> +			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
> +			ret = -ENODEV;
> +			goto err_disable_msi;
> +		}

This is where a refactoring patch is useful. Have one patch which
moves this code into a helper function. The commit message can say it
just moves code around, but there is no functional change. The second
patch then moves the call to the helper inside the if (np).

      Andrew
Yanteng Si Dec. 11, 2023, 8:47 a.m. UTC | #2 
在 2023/11/12 04:24, Andrew Lunn 写道:
>> -	res.irq = of_irq_get_byname(np, "macirq");
>> -	if (res.irq < 0) {
>> -		dev_err(&pdev->dev, "IRQ macirq not found\n");
>> -		ret = -ENODEV;
>> -		goto err_disable_msi;
>> -	}
>> -
>> -	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
>> -	if (res.wol_irq < 0) {
>> -		dev_info(&pdev->dev,
>> -			 "IRQ eth_wake_irq not found, using macirq\n");
>> -		res.wol_irq = res.irq;
>> -	}
>> -
>> -	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
>> -	if (res.lpi_irq < 0) {
>> -		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
>> -		ret = -ENODEV;
>> -		goto err_disable_msi;
>> +	if (np) {
>> +		res.irq = of_irq_get_byname(np, "macirq");
>> +		if (res.irq < 0) {
>> +			dev_err(&pdev->dev, "IRQ macirq not found\n");
>> +			ret = -ENODEV;
>> +			goto err_disable_msi;
>> +		}
>> +
>> +		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
>> +		if (res.wol_irq < 0) {
>> +			dev_info(&pdev->dev,
>> +				 "IRQ eth_wake_irq not found, using macirq\n");
>> +			res.wol_irq = res.irq;
>> +		}
>> +
>> +		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
>> +		if (res.lpi_irq < 0) {
>> +			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
>> +			ret = -ENODEV;
>> +			goto err_disable_msi;
>> +		}
> This is where a refactoring patch is useful. Have one patch which
> moves this code into a helper function. The commit message can say it
> just moves code around, but there is no functional change. The second
> patch then moves the call to the helper inside the if (np).

Thanks for your advice!


In fact, we have already done this in <[PATCH v5 6/9] net: stmmac: 
dwmac-loongson: Add MSI support>, and the function is 
loongson_dwmac_config_legacy().


Thanks,

Yanteng


>
>        Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 56d1fd8c61e1..0d79104d7fd3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -16,6 +16,10 @@  struct stmmac_pci_info {
 static void loongson_default_data(struct pci_dev *pdev,
 				  struct plat_stmmacenet_data *plat)
 {
+	/* Get bus_id, this can be overloaded later */
+	plat->bus_id = (pci_domain_nr(pdev->bus) << 16) |
+		       PCI_DEVID(pdev->bus->number, pdev->devfn);
+
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
 	plat->force_sf_dma_mode = 1;
@@ -56,6 +60,9 @@  static int loongson_gmac_data(struct pci_dev *pdev,
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
 
+	plat->clk_ref_rate = 125000000;
+	plat->clk_ptp_rate = 125000000;
+
 	return 0;
 }
 
@@ -72,13 +79,6 @@  static int loongson_dwmac_probe(struct pci_dev *pdev,
 	struct stmmac_resources res;
 	struct device_node *np;
 
-	np = dev_of_node(&pdev->dev);
-
-	if (!np) {
-		pr_info("dwmac_loongson_pci: No OF node\n");
-		return -ENODEV;
-	}
-
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 	if (!plat)
 		return -ENOMEM;
@@ -94,6 +94,7 @@  static int loongson_dwmac_probe(struct pci_dev *pdev,
 	if (!plat->dma_cfg)
 		return -ENOMEM;
 
+	np = dev_of_node(&pdev->dev);
 	plat->mdio_node = of_get_child_by_name(np, "mdio");
 	if (plat->mdio_node) {
 		dev_info(&pdev->dev, "Found MDIO subnode\n");
@@ -125,42 +126,48 @@  static int loongson_dwmac_probe(struct pci_dev *pdev,
 	if (ret)
 		goto err_disable_device;
 
-	bus_id = of_alias_get_id(np, "ethernet");
-	if (bus_id >= 0)
-		plat->bus_id = bus_id;
+	if (np) {
+		bus_id = of_alias_get_id(np, "ethernet");
+		if (bus_id >= 0)
+			plat->bus_id = bus_id;
 
-	phy_mode = device_get_phy_mode(&pdev->dev);
-	if (phy_mode < 0) {
-		dev_err(&pdev->dev, "phy_mode not found\n");
-		ret = phy_mode;
-		goto err_disable_device;
+		phy_mode = device_get_phy_mode(&pdev->dev);
+		if (phy_mode < 0) {
+			dev_err(&pdev->dev, "phy_mode not found\n");
+			ret = phy_mode;
+			goto err_disable_device;
+		}
+		plat->phy_interface = phy_mode;
 	}
 
-	plat->phy_interface = phy_mode;
-
 	pci_enable_msi(pdev);
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];
 
-	res.irq = of_irq_get_byname(np, "macirq");
-	if (res.irq < 0) {
-		dev_err(&pdev->dev, "IRQ macirq not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
-
-	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-	if (res.wol_irq < 0) {
-		dev_info(&pdev->dev,
-			 "IRQ eth_wake_irq not found, using macirq\n");
-		res.wol_irq = res.irq;
-	}
-
-	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-	if (res.lpi_irq < 0) {
-		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
+	if (np) {
+		res.irq = of_irq_get_byname(np, "macirq");
+		if (res.irq < 0) {
+			dev_err(&pdev->dev, "IRQ macirq not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+
+		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+		if (res.wol_irq < 0) {
+			dev_info(&pdev->dev,
+				 "IRQ eth_wake_irq not found, using macirq\n");
+			res.wol_irq = res.irq;
+		}
+
+		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
+		if (res.lpi_irq < 0) {
+			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+	} else {
+		res.irq = pdev->irq;
+		res.wol_irq = pdev->irq;
 	}
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);