diff mbox series

[net-next] net: phy: realtek: Add support for RTL8221B-CG series

Message ID 1604037380-16735-1-git-send-email-willy.liu@realtek.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series [net-next] net: phy: realtek: Add support for RTL8221B-CG series | expand

Commit Message

Willy Liu Oct. 30, 2020, 5:56 a.m. UTC 
Realtek single-port 2.5Gbps Ethernet PHYs are list as below:
RTL8226-CG: the 1st generation 2.5Gbps single port PHY
RTL8226B-CG/RTL8221B-CG: the 2nd generation 2.5Gbps single port PHY
RTL8221B-VB-CG: the 3rd generation 2.5Gbps single port PHY
RTL8221B-VM-CG: the 2.5Gbps single port PHY with MACsec feature

This patch adds the minimal drivers to manage these transceivers.

Signed-off-by: Willy Liu <willy.liu@realtek.com>
---
 drivers/net/phy/realtek.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 mode change 100644 => 100755 drivers/net/phy/realtek.c

Comments

Jakub Kicinski Oct. 30, 2020, 3:33 p.m. UTC | #1 
On Fri, 30 Oct 2020 13:56:20 +0800 Willy Liu wrote:
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> old mode 100644
> new mode 100755
> index fb1db71..2ba0d73

checkpatch says:

ERROR: do not set execute permissions for source files
#23: FILE: drivers/net/phy/realtek.c

total: 1 errors, 0 warnings, 0 checks, 46 lines checked
Andrew Lunn Oct. 30, 2020, 3:54 p.m. UTC | #2 
On Fri, Oct 30, 2020 at 01:56:20PM +0800, Willy Liu wrote:
> Realtek single-port 2.5Gbps Ethernet PHYs are list as below:
> RTL8226-CG: the 1st generation 2.5Gbps single port PHY
> RTL8226B-CG/RTL8221B-CG: the 2nd generation 2.5Gbps single port PHY
> RTL8221B-VB-CG: the 3rd generation 2.5Gbps single port PHY
> RTL8221B-VM-CG: the 2.5Gbps single port PHY with MACsec feature
> 
> This patch adds the minimal drivers to manage these transceivers.
> 
> Signed-off-by: Willy Liu <willy.liu@realtek.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
old mode 100644
new mode 100755
index fb1db71..2ba0d73
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -660,6 +660,46 @@  static int rtlgen_resume(struct phy_device *phydev)
 		.read_mmd	= rtl822x_read_mmd,
 		.write_mmd	= rtl822x_write_mmd,
 	}, {
+		PHY_ID_MATCH_EXACT(0x001cc838),
+		.name           = "RTL8226-CG 2.5Gbps PHY",
+		.get_features   = rtl822x_get_features,
+		.config_aneg    = rtl822x_config_aneg,
+		.read_status    = rtl822x_read_status,
+		.suspend        = genphy_suspend,
+		.resume         = rtlgen_resume,
+		.read_page      = rtl821x_read_page,
+		.write_page     = rtl821x_write_page,
+	}, {
+		PHY_ID_MATCH_EXACT(0x001cc848),
+		.name           = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+		.get_features   = rtl822x_get_features,
+		.config_aneg    = rtl822x_config_aneg,
+		.read_status    = rtl822x_read_status,
+		.suspend        = genphy_suspend,
+		.resume         = rtlgen_resume,
+		.read_page      = rtl821x_read_page,
+		.write_page     = rtl821x_write_page,
+	}, {
+		PHY_ID_MATCH_EXACT(0x001cc849),
+		.name           = "RTL8221B-VB-CG 2.5Gbps PHY",
+		.get_features   = rtl822x_get_features,
+		.config_aneg    = rtl822x_config_aneg,
+		.read_status    = rtl822x_read_status,
+		.suspend        = genphy_suspend,
+		.resume         = rtlgen_resume,
+		.read_page      = rtl821x_read_page,
+		.write_page     = rtl821x_write_page,
+	}, {
+		PHY_ID_MATCH_EXACT(0x001cc84a),
+		.name           = "RTL8221B-VM-CG 2.5Gbps PHY",
+		.get_features   = rtl822x_get_features,
+		.config_aneg    = rtl822x_config_aneg,
+		.read_status    = rtl822x_read_status,
+		.suspend        = genphy_suspend,
+		.resume         = rtlgen_resume,
+		.read_page      = rtl821x_read_page,
+		.write_page     = rtl821x_write_page,
+	}, {
 		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",
 		.config_init	= &rtl8366rb_config_init,