@@ -211,8 +211,8 @@ void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
* GL and RL(Rate Limiter) are 2 ways to acheive interrupt coalescing
*/
- if (rl_reg > 0 && !tqp_vector->tx_group.coal.gl_adapt_enable &&
- !tqp_vector->rx_group.coal.gl_adapt_enable)
+ if (rl_reg > 0 && !tqp_vector->tx_group.coal.adapt_enable &&
+ !tqp_vector->rx_group.coal.adapt_enable)
/* According to the hardware, the range of rl_reg is
* 0-59 and the unit is 4.
*/
@@ -273,8 +273,8 @@ static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
*
* Default: enable interrupt coalescing self-adaptive and GL
*/
- tx_coal->gl_adapt_enable = 1;
- rx_coal->gl_adapt_enable = 1;
+ tx_coal->adapt_enable = 1;
+ rx_coal->adapt_enable = 1;
tx_coal->int_gl = HNS3_INT_GL_50K;
rx_coal->int_gl = HNS3_INT_GL_50K;
@@ -3384,14 +3384,14 @@ static void hns3_update_new_int_gl(struct hns3_enet_tqp_vector *tqp_vector)
tqp_vector->last_jiffies + msecs_to_jiffies(1000)))
return;
- if (rx_group->coal.gl_adapt_enable) {
+ if (rx_group->coal.adapt_enable) {
rx_update = hns3_get_new_int_gl(rx_group);
if (rx_update)
hns3_set_vector_coalesce_rx_gl(tqp_vector,
rx_group->coal.int_gl);
}
- if (tx_group->coal.gl_adapt_enable) {
+ if (tx_group->coal.adapt_enable) {
tx_update = hns3_get_new_int_gl(tx_group);
if (tx_update)
hns3_set_vector_coalesce_tx_gl(tqp_vector,
@@ -436,7 +436,7 @@ struct hns3_enet_coalesce {
u16 int_gl;
u16 int_ql;
u16 int_ql_max;
- u8 gl_adapt_enable:1;
+ u8 adapt_enable:1;
u8 ql_enable:1;
u8 unit_1us:1;
enum hns3_flow_level_range flow_level;
@@ -1105,9 +1105,9 @@ static int hns3_get_coalesce_per_queue(struct net_device *netdev, u32 queue,
rx_vector = priv->ring[queue_num + queue].tqp_vector;
cmd->use_adaptive_tx_coalesce =
- tx_vector->tx_group.coal.gl_adapt_enable;
+ tx_vector->tx_group.coal.adapt_enable;
cmd->use_adaptive_rx_coalesce =
- rx_vector->rx_group.coal.gl_adapt_enable;
+ rx_vector->rx_group.coal.adapt_enable;
cmd->tx_coalesce_usecs = tx_vector->tx_group.coal.int_gl;
cmd->rx_coalesce_usecs = rx_vector->rx_group.coal.int_gl;
@@ -1268,9 +1268,9 @@ static void hns3_set_coalesce_per_queue(struct net_device *netdev,
tx_vector = priv->ring[queue].tqp_vector;
rx_vector = priv->ring[queue_num + queue].tqp_vector;
- tx_vector->tx_group.coal.gl_adapt_enable =
+ tx_vector->tx_group.coal.adapt_enable =
cmd->use_adaptive_tx_coalesce;
- rx_vector->rx_group.coal.gl_adapt_enable =
+ rx_vector->rx_group.coal.adapt_enable =
cmd->use_adaptive_rx_coalesce;
tx_vector->tx_group.coal.int_gl = cmd->tx_coalesce_usecs;
Besides GL(Gap Limiting), QL(Quantity Limiting) can be modified dynamically when DIM is supported. So rename gl_adapt_enable as adapt_enable in struct hns3_enet_coalesce. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 12 ++++++------ drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 8 ++++---- 3 files changed, 11 insertions(+), 11 deletions(-)