@@ -928,6 +928,7 @@ Kernel response contents:
``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
+ ``ETHTOOL_A_COALESCE_USE_DIM`` bool using DIM adaptive
=========================================== ====== =======================
Attributes are only included in reply if their value is not zero or the
@@ -215,6 +215,7 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
#define ETHTOOL_COALESCE_TX_USECS_HIGH BIT(19)
#define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH BIT(20)
#define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL BIT(21)
+#define ETHTOOL_COALESCE_USE_DIM BIT(22)
#define ETHTOOL_COALESCE_USECS \
(ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
@@ -241,6 +242,10 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
+struct ethtool_ext_coalesce {
+ __u32 use_dim;
+};
+
#define ETHTOOL_STAT_NOT_SET (~0ULL)
/**
@@ -298,9 +303,14 @@ struct ethtool_pause_stats {
* or zero.
* @get_coalesce: Get interrupt coalescing parameters. Returns a negative
* error code or zero.
+ * @get_ext_coalesce: Get extended interrupt coalescing parameters.
+ * Returns a negative error code or zero.
* @set_coalesce: Set interrupt coalescing parameters. Supported coalescing
* types should be set in @supported_coalesce_params.
* Returns a negative error code or zero.
+ * @set_ext_coalesce: Set extended interrupt coalescing parameters. Supported
+ * extended coalescing types should be set in @supported_coalesce_params.
+ * Returns a negative error code or zero.
* @get_ringparam: Report ring sizes
* @set_ringparam: Set ring sizes. Returns a negative error code or zero.
* @get_pause_stats: Report pause frame statistics. Drivers must not zero
@@ -437,7 +447,11 @@ struct ethtool_ops {
int (*set_eeprom)(struct net_device *,
struct ethtool_eeprom *, u8 *);
int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
+ int (*get_ext_coalesce)(struct net_device *,
+ struct ethtool_ext_coalesce *);
int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
+ int (*set_ext_coalesce)(struct net_device *,
+ struct ethtool_ext_coalesce *);
void (*get_ringparam)(struct net_device *,
struct ethtool_ringparam *);
int (*set_ringparam)(struct net_device *,
@@ -366,6 +366,7 @@ enum {
ETHTOOL_A_COALESCE_TX_USECS_HIGH, /* u32 */
ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH, /* u32 */
ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL, /* u32 */
+ ETHTOOL_A_COALESCE_USE_DIM, /* u8 */
/* add new constants above here */
__ETHTOOL_A_COALESCE_CNT,
@@ -11,6 +11,7 @@ struct coalesce_reply_data {
struct ethnl_reply_data base;
struct ethtool_coalesce coalesce;
u32 supported_params;
+ struct ethtool_ext_coalesce ext_coalesce;
};
#define COALESCE_REPDATA(__reply_base) \
@@ -50,6 +51,7 @@ __CHECK_SUPPORTED_OFFSET(COALESCE_RX_MAX_FRAMES_HIGH);
__CHECK_SUPPORTED_OFFSET(COALESCE_TX_USECS_HIGH);
__CHECK_SUPPORTED_OFFSET(COALESCE_TX_MAX_FRAMES_HIGH);
__CHECK_SUPPORTED_OFFSET(COALESCE_RATE_SAMPLE_INTERVAL);
+__CHECK_SUPPORTED_OFFSET(COALESCE_USE_DIM);
const struct nla_policy ethnl_coalesce_get_policy[] = {
[ETHTOOL_A_COALESCE_HEADER] =
@@ -71,6 +73,14 @@ static int coalesce_prepare_data(const struct ethnl_req_info *req_base,
if (ret < 0)
return ret;
ret = dev->ethtool_ops->get_coalesce(dev, &data->coalesce);
+
+ if (dev->ethtool_ops->get_ext_coalesce) {
+ ret = dev->ethtool_ops->get_ext_coalesce(dev,
+ &data->ext_coalesce);
+ if (ret < 0)
+ return ret;
+ }
+
ethnl_ops_complete(dev);
return ret;
@@ -100,7 +110,8 @@ static int coalesce_reply_size(const struct ethnl_req_info *req_base,
nla_total_size(sizeof(u32)) + /* _RX_MAX_FRAMES_HIGH */
nla_total_size(sizeof(u32)) + /* _TX_USECS_HIGH */
nla_total_size(sizeof(u32)) + /* _TX_MAX_FRAMES_HIGH */
- nla_total_size(sizeof(u32)); /* _RATE_SAMPLE_INTERVAL */
+ nla_total_size(sizeof(u32)) + /* _RATE_SAMPLE_INTERVAL */
+ nla_total_size(sizeof(u8)); /* _USE_DIM */
}
static bool coalesce_put_u32(struct sk_buff *skb, u16 attr_type, u32 val,
@@ -124,6 +135,7 @@ static int coalesce_fill_reply(struct sk_buff *skb,
const struct ethnl_reply_data *reply_base)
{
const struct coalesce_reply_data *data = COALESCE_REPDATA(reply_base);
+ const struct ethtool_ext_coalesce *ext_coal = &data->ext_coalesce;
const struct ethtool_coalesce *coal = &data->coalesce;
u32 supported = data->supported_params;
@@ -170,7 +182,9 @@ static int coalesce_fill_reply(struct sk_buff *skb,
coalesce_put_u32(skb, ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH,
coal->tx_max_coalesced_frames_high, supported) ||
coalesce_put_u32(skb, ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL,
- coal->rate_sample_interval, supported))
+ coal->rate_sample_interval, supported) ||
+ coalesce_put_bool(skb, ETHTOOL_A_COALESCE_USE_DIM,
+ ext_coal->use_dim, supported))
return -EMSGSIZE;
return 0;
@@ -215,10 +229,12 @@ const struct nla_policy ethnl_coalesce_set_policy[] = {
[ETHTOOL_A_COALESCE_TX_USECS_HIGH] = { .type = NLA_U32 },
[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH] = { .type = NLA_U32 },
[ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL] = { .type = NLA_U32 },
+ [ETHTOOL_A_COALESCE_USE_DIM] = { .type = NLA_U8 },
};
int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info)
{
+ struct ethtool_ext_coalesce ext_coalesce = {};
struct ethtool_coalesce coalesce = {};
struct ethnl_req_info req_info = {};
struct nlattr **tb = info->attrs;
@@ -259,6 +275,12 @@ int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info)
if (ret < 0)
goto out_ops;
+ if (ops->get_ext_coalesce) {
+ ret = ops->get_ext_coalesce(dev, &ext_coalesce);
+ if (ret < 0)
+ goto out_ops;
+ }
+
ethnl_update_u32(&coalesce.rx_coalesce_usecs,
tb[ETHTOOL_A_COALESCE_RX_USECS], &mod);
ethnl_update_u32(&coalesce.rx_max_coalesced_frames,
@@ -303,6 +325,8 @@ int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info)
tb[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH], &mod);
ethnl_update_u32(&coalesce.rate_sample_interval,
tb[ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL], &mod);
+ ethnl_update_bool32(&ext_coalesce.use_dim,
+ tb[ETHTOOL_A_COALESCE_USE_DIM], &mod);
ret = 0;
if (!mod)
goto out_ops;
@@ -310,6 +334,13 @@ int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info)
ret = dev->ethtool_ops->set_coalesce(dev, &coalesce);
if (ret < 0)
goto out_ops;
+
+ if (ops->set_ext_coalesce) {
+ ret = ops->set_ext_coalesce(dev, &ext_coalesce);
+ if (ret < 0)
+ goto out_ops;
+ }
+
ethtool_notify(dev, ETHTOOL_MSG_COALESCE_NTF, NULL);
out_ops:
@@ -366,7 +366,7 @@ extern const struct nla_policy ethnl_rings_set_policy[ETHTOOL_A_RINGS_TX + 1];
extern const struct nla_policy ethnl_channels_get_policy[ETHTOOL_A_CHANNELS_HEADER + 1];
extern const struct nla_policy ethnl_channels_set_policy[ETHTOOL_A_CHANNELS_COMBINED_COUNT + 1];
extern const struct nla_policy ethnl_coalesce_get_policy[ETHTOOL_A_COALESCE_HEADER + 1];
-extern const struct nla_policy ethnl_coalesce_set_policy[ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL + 1];
+extern const struct nla_policy ethnl_coalesce_set_policy[ETHTOOL_A_COALESCE_USE_DIM + 1];
extern const struct nla_policy ethnl_pause_get_policy[ETHTOOL_A_PAUSE_HEADER + 1];
extern const struct nla_policy ethnl_pause_set_policy[ETHTOOL_A_PAUSE_TX + 1];
extern const struct nla_policy ethnl_eee_get_policy[ETHTOOL_A_EEE_HEADER + 1];
Since the information whether the adaptive behavior is implemented by DIM or driver custom is useful, so add new attribute to ETHTOOL_MSG_COALESCE_GET/ETHTOOL_MSG_COALESCE_SET commands to control the type of adaptive coalescing. In order to compatible with ioctl code, add a extended coalescing handler to deal with it in the netlink API, then other new extended coalescing parameters can utiliaze it as well. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> --- Documentation/networking/ethtool-netlink.rst | 1 + include/linux/ethtool.h | 14 +++++++++++ include/uapi/linux/ethtool_netlink.h | 1 + net/ethtool/coalesce.c | 35 ++++++++++++++++++++++++++-- net/ethtool/netlink.h | 2 +- 5 files changed, 50 insertions(+), 3 deletions(-)