diff mbox series

[v3,net-next,3/4] nfc: s3fwrn5: extract the common phy blocks

Message ID 1606737829-29586-1-git-send-email-bongsu.jeon@samsung.com (mailing list archive)
State Deferred
Delegated to: Netdev Maintainers
Headers show
Series None | expand

Commit Message

Bongsu Jeon Nov. 30, 2020, 12:03 p.m. UTC
From: Bongsu Jeon <bongsu.jeon@samsung.com>

Extract the common phy blocks to reuse it.
The UART module will use the common blocks.

Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
---
 Changes in v3:
   - move the phy_common object to s3fwrn.ko to avoid duplication.
   - include the header files to include everything which is used inside.
   - wrap the lines.

 Changes in v2:
   - remove the common function's definition in common header file.
   - make the common phy_common.c file to define the common function.
   - wrap the lines.
   - change the Header guard.
   - remove the unused common function.

 drivers/nfc/s3fwrn5/Makefile     |   2 +-
 drivers/nfc/s3fwrn5/i2c.c        | 117 +++++++++++++--------------------------
 drivers/nfc/s3fwrn5/phy_common.c |  63 +++++++++++++++++++++
 drivers/nfc/s3fwrn5/phy_common.h |  36 ++++++++++++
 4 files changed, 139 insertions(+), 79 deletions(-)
 create mode 100644 drivers/nfc/s3fwrn5/phy_common.c
 create mode 100644 drivers/nfc/s3fwrn5/phy_common.h

Comments

Krzysztof Kozlowski Nov. 30, 2020, 6:42 p.m. UTC | #1
On Mon, Nov 30, 2020 at 09:03:49PM +0900, Bongsu Jeon wrote:
> From: Bongsu Jeon <bongsu.jeon@samsung.com>
> 
> Extract the common phy blocks to reuse it.
> The UART module will use the common blocks.
> 
> Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
> ---
>  Changes in v3:
>    - move the phy_common object to s3fwrn.ko to avoid duplication.
>    - include the header files to include everything which is used inside.
>    - wrap the lines.
> 
>  Changes in v2:
>    - remove the common function's definition in common header file.
>    - make the common phy_common.c file to define the common function.
>    - wrap the lines.
>    - change the Header guard.
>    - remove the unused common function.
> 
>  drivers/nfc/s3fwrn5/Makefile     |   2 +-
>  drivers/nfc/s3fwrn5/i2c.c        | 117 +++++++++++++--------------------------
>  drivers/nfc/s3fwrn5/phy_common.c |  63 +++++++++++++++++++++
>  drivers/nfc/s3fwrn5/phy_common.h |  36 ++++++++++++
>  4 files changed, 139 insertions(+), 79 deletions(-)
>  create mode 100644 drivers/nfc/s3fwrn5/phy_common.c
>  create mode 100644 drivers/nfc/s3fwrn5/phy_common.h

I am sorry, but I am not going to review this. Please send properly a
next version - v4 of entire patchset - while fixing issues pointed out
in my other email (so use proper workflow).

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/nfc/s3fwrn5/Makefile b/drivers/nfc/s3fwrn5/Makefile
index d0ffa35..6b6f52d 100644
--- a/drivers/nfc/s3fwrn5/Makefile
+++ b/drivers/nfc/s3fwrn5/Makefile
@@ -3,7 +3,7 @@ 
 # Makefile for Samsung S3FWRN5 NFC driver
 #
 
-s3fwrn5-objs = core.o firmware.o nci.o
+s3fwrn5-objs = core.o firmware.o nci.o phy_common.o
 s3fwrn5_i2c-objs = i2c.o
 
 obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5.o
diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
index 9a64eea..e1bdde1 100644
--- a/drivers/nfc/s3fwrn5/i2c.c
+++ b/drivers/nfc/s3fwrn5/i2c.c
@@ -15,75 +15,30 @@ 
 
 #include <net/nfc/nfc.h>
 
-#include "s3fwrn5.h"
+#include "phy_common.h"
 
 #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c"
 
-#define S3FWRN5_EN_WAIT_TIME 20
-
 struct s3fwrn5_i2c_phy {
+	struct phy_common common;
 	struct i2c_client *i2c_dev;
-	struct nci_dev *ndev;
-
-	int gpio_en;
-	int gpio_fw_wake;
-
-	struct mutex mutex;
 
-	enum s3fwrn5_mode mode;
 	unsigned int irq_skip:1;
 };
 
-static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake)
-{
-	struct s3fwrn5_i2c_phy *phy = phy_id;
-
-	mutex_lock(&phy->mutex);
-	gpio_set_value(phy->gpio_fw_wake, wake);
-	msleep(S3FWRN5_EN_WAIT_TIME);
-	mutex_unlock(&phy->mutex);
-}
-
 static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode)
 {
 	struct s3fwrn5_i2c_phy *phy = phy_id;
 
-	mutex_lock(&phy->mutex);
+	mutex_lock(&phy->common.mutex);
 
-	if (phy->mode == mode)
+	if (s3fwrn5_phy_power_ctrl(&phy->common, mode) == false)
 		goto out;
 
-	phy->mode = mode;
-
-	gpio_set_value(phy->gpio_en, 1);
-	gpio_set_value(phy->gpio_fw_wake, 0);
-	if (mode == S3FWRN5_MODE_FW)
-		gpio_set_value(phy->gpio_fw_wake, 1);
-
-	if (mode != S3FWRN5_MODE_COLD) {
-		msleep(S3FWRN5_EN_WAIT_TIME);
-		gpio_set_value(phy->gpio_en, 0);
-		msleep(S3FWRN5_EN_WAIT_TIME);
-	}
-
 	phy->irq_skip = true;
 
 out:
-	mutex_unlock(&phy->mutex);
-}
-
-static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id)
-{
-	struct s3fwrn5_i2c_phy *phy = phy_id;
-	enum s3fwrn5_mode mode;
-
-	mutex_lock(&phy->mutex);
-
-	mode = phy->mode;
-
-	mutex_unlock(&phy->mutex);
-
-	return mode;
+	mutex_unlock(&phy->common.mutex);
 }
 
 static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
@@ -91,7 +46,7 @@  static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
 	struct s3fwrn5_i2c_phy *phy = phy_id;
 	int ret;
 
-	mutex_lock(&phy->mutex);
+	mutex_lock(&phy->common.mutex);
 
 	phy->irq_skip = false;
 
@@ -102,7 +57,7 @@  static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
 		ret  = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
 	}
 
-	mutex_unlock(&phy->mutex);
+	mutex_unlock(&phy->common.mutex);
 
 	if (ret < 0)
 		return ret;
@@ -114,9 +69,9 @@  static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
 }
 
 static const struct s3fwrn5_phy_ops i2c_phy_ops = {
-	.set_wake = s3fwrn5_i2c_set_wake,
+	.set_wake = s3fwrn5_phy_set_wake,
 	.set_mode = s3fwrn5_i2c_set_mode,
-	.get_mode = s3fwrn5_i2c_get_mode,
+	.get_mode = s3fwrn5_phy_get_mode,
 	.write = s3fwrn5_i2c_write,
 };
 
@@ -128,7 +83,7 @@  static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
 	char hdr[4];
 	int ret;
 
-	hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ?
+	hdr_size = (phy->common.mode == S3FWRN5_MODE_NCI) ?
 		NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE;
 	ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size);
 	if (ret < 0)
@@ -137,7 +92,7 @@  static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
 	if (ret < hdr_size)
 		return -EBADMSG;
 
-	data_len = (phy->mode == S3FWRN5_MODE_NCI) ?
+	data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ?
 		((struct nci_ctrl_hdr *)hdr)->plen :
 		((struct s3fwrn5_fw_header *)hdr)->len;
 
@@ -157,24 +112,24 @@  static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
 	}
 
 out:
-	return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode);
+	return s3fwrn5_recv_frame(phy->common.ndev, skb, phy->common.mode);
 }
 
 static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
 {
 	struct s3fwrn5_i2c_phy *phy = phy_id;
 
-	if (!phy || !phy->ndev) {
+	if (!phy || !phy->common.ndev) {
 		WARN_ON_ONCE(1);
 		return IRQ_NONE;
 	}
 
-	mutex_lock(&phy->mutex);
+	mutex_lock(&phy->common.mutex);
 
 	if (phy->irq_skip)
 		goto out;
 
-	switch (phy->mode) {
+	switch (phy->common.mode) {
 	case S3FWRN5_MODE_NCI:
 	case S3FWRN5_MODE_FW:
 		s3fwrn5_i2c_read(phy);
@@ -184,7 +139,7 @@  static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
 	}
 
 out:
-	mutex_unlock(&phy->mutex);
+	mutex_unlock(&phy->common.mutex);
 
 	return IRQ_HANDLED;
 }
@@ -197,19 +152,23 @@  static int s3fwrn5_i2c_parse_dt(struct i2c_client *client)
 	if (!np)
 		return -ENODEV;
 
-	phy->gpio_en = of_get_named_gpio(np, "en-gpios", 0);
-	if (!gpio_is_valid(phy->gpio_en)) {
+	phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0);
+	if (!gpio_is_valid(phy->common.gpio_en)) {
 		/* Support also deprecated property */
-		phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
-		if (!gpio_is_valid(phy->gpio_en))
+		phy->common.gpio_en = of_get_named_gpio(np,
+							"s3fwrn5,en-gpios",
+							0);
+		if (!gpio_is_valid(phy->common.gpio_en))
 			return -ENODEV;
 	}
 
-	phy->gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
-	if (!gpio_is_valid(phy->gpio_fw_wake)) {
+	phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
+	if (!gpio_is_valid(phy->common.gpio_fw_wake)) {
 		/* Support also deprecated property */
-		phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0);
-		if (!gpio_is_valid(phy->gpio_fw_wake))
+		phy->common.gpio_fw_wake = of_get_named_gpio(np,
+							     "s3fwrn5,fw-gpios",
+							     0);
+		if (!gpio_is_valid(phy->common.gpio_fw_wake))
 			return -ENODEV;
 	}
 
@@ -226,8 +185,8 @@  static int s3fwrn5_i2c_probe(struct i2c_client *client,
 	if (!phy)
 		return -ENOMEM;
 
-	mutex_init(&phy->mutex);
-	phy->mode = S3FWRN5_MODE_COLD;
+	mutex_init(&phy->common.mutex);
+	phy->common.mode = S3FWRN5_MODE_COLD;
 	phy->irq_skip = true;
 
 	phy->i2c_dev = client;
@@ -237,17 +196,19 @@  static int s3fwrn5_i2c_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
-	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
-		GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
+	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_en,
+				    GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
 	if (ret < 0)
 		return ret;
 
-	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake,
-		GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
+	ret = devm_gpio_request_one(&phy->i2c_dev->dev,
+				    phy->common.gpio_fw_wake,
+				    GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
 	if (ret < 0)
 		return ret;
 
-	ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops);
+	ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev,
+			    &i2c_phy_ops);
 	if (ret < 0)
 		return ret;
 
@@ -255,7 +216,7 @@  static int s3fwrn5_i2c_probe(struct i2c_client *client,
 		s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 		S3FWRN5_I2C_DRIVER_NAME, phy);
 	if (ret)
-		s3fwrn5_remove(phy->ndev);
+		s3fwrn5_remove(phy->common.ndev);
 
 	return ret;
 }
@@ -264,7 +225,7 @@  static int s3fwrn5_i2c_remove(struct i2c_client *client)
 {
 	struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
 
-	s3fwrn5_remove(phy->ndev);
+	s3fwrn5_remove(phy->common.ndev);
 
 	return 0;
 }
diff --git a/drivers/nfc/s3fwrn5/phy_common.c b/drivers/nfc/s3fwrn5/phy_common.c
new file mode 100644
index 0000000..5cad1f4
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/phy_common.c
@@ -0,0 +1,63 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Link Layer for Samsung S3FWRN5 NCI based Driver
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ * Copyright (C) 2020 Samsung Electrnoics
+ * Bongsu Jeon <bongsu.jeon@samsung.com>
+ */
+
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include "phy_common.h"
+
+void s3fwrn5_phy_set_wake(void *phy_id, bool wake)
+{
+	struct phy_common *phy = phy_id;
+
+	mutex_lock(&phy->mutex);
+	gpio_set_value(phy->gpio_fw_wake, wake);
+	msleep(S3FWRN5_EN_WAIT_TIME);
+	mutex_unlock(&phy->mutex);
+}
+EXPORT_SYMBOL(s3fwrn5_phy_set_wake);
+
+bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode)
+{
+	if (phy->mode == mode)
+		return false;
+
+	phy->mode = mode;
+
+	gpio_set_value(phy->gpio_en, 1);
+	gpio_set_value(phy->gpio_fw_wake, 0);
+	if (mode == S3FWRN5_MODE_FW)
+		gpio_set_value(phy->gpio_fw_wake, 1);
+
+	if (mode != S3FWRN5_MODE_COLD) {
+		msleep(S3FWRN5_EN_WAIT_TIME);
+		gpio_set_value(phy->gpio_en, 0);
+		msleep(S3FWRN5_EN_WAIT_TIME);
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(s3fwrn5_phy_power_ctrl);
+
+enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id)
+{
+	struct phy_common *phy = phy_id;
+	enum s3fwrn5_mode mode;
+
+	mutex_lock(&phy->mutex);
+
+	mode = phy->mode;
+
+	mutex_unlock(&phy->mutex);
+
+	return mode;
+}
+EXPORT_SYMBOL(s3fwrn5_phy_get_mode);
diff --git a/drivers/nfc/s3fwrn5/phy_common.h b/drivers/nfc/s3fwrn5/phy_common.h
new file mode 100644
index 0000000..b98531d
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/phy_common.h
@@ -0,0 +1,36 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Link Layer for Samsung S3FWRN5 NCI based Driver
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ * Copyright (C) 2020 Samsung Electrnoics
+ * Bongsu Jeon <bongsu.jeon@samsung.com>
+ */
+
+#ifndef __NFC_S3FWRN5_PHY_COMMON_H
+#define __NFC_S3FWRN5_PHY_COMMON_H
+
+#include <linux/mutex.h>
+#include <net/nfc/nci_core.h>
+
+#include "s3fwrn5.h"
+
+#define S3FWRN5_EN_WAIT_TIME 20
+
+struct phy_common {
+	struct nci_dev *ndev;
+
+	int gpio_en;
+	int gpio_fw_wake;
+
+	struct mutex mutex;
+
+	enum s3fwrn5_mode mode;
+};
+
+void s3fwrn5_phy_set_wake(void *phy_id, bool wake);
+bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode);
+enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id);
+
+#endif /* __NFC_S3FWRN5_PHY_COMMON_H */