diff mbox series

[bpf-next,V14,2/7] bpf: fix bpf_fib_lookup helper MTU check for SKB ctx

Message ID 161217673648.494501.14458670792610885379.stgit@firesoul (mailing list archive)
State Superseded
Delegated to: BPF
Headers show
Series bpf: New approach for BPF MTU handling | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for bpf-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 9 maintainers not CCed: songliubraving@fb.com andrii@kernel.org daniel@iogearbox.net dsahern@gmail.com kpsingh@kernel.org davem@davemloft.net ast@kernel.org kafai@fb.com yhs@fb.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 45 this patch: 45
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 126 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 45 this patch: 45
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Jesper Dangaard Brouer Feb. 1, 2021, 10:52 a.m. UTC
BPF end-user on Cilium slack-channel (Carlo Carraro) wants to use
bpf_fib_lookup for doing MTU-check, but *prior* to extending packet size,
by adjusting fib_params 'tot_len' with the packet length plus the expected
encap size. (Just like the bpf_check_mtu helper supports). He discovered
that for SKB ctx the param->tot_len was not used, instead skb->len was used
(via MTU check in is_skb_forwardable() that checks against netdev MTU).

Fix this by using fib_params 'tot_len' for MTU check. If not provided (e.g.
zero) then keep existing TC behaviour intact. Notice that 'tot_len' for MTU
check is done like XDP code-path, which checks against FIB-dst MTU.

V13:
- Only do ifindex lookup one time, calling dev_get_by_index_rcu().

V10:
- Use same method as XDP for 'tot_len' MTU check

Fixes: 4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status")
Reported-by: Carlo Carraro <colrack@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
---
 net/core/filter.c |   50 ++++++++++++++++++++++++++++----------------------
 1 file changed, 28 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/net/core/filter.c b/net/core/filter.c
index 5beadd659091..252fbb294001 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -5301,22 +5301,18 @@  static int bpf_fib_set_fwd_params(struct bpf_fib_lookup *params,
 #endif
 
 #if IS_ENABLED(CONFIG_INET)
-static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
+static int bpf_ipv4_fib_lookup(struct net *net, struct net_device *dev,
+			       struct bpf_fib_lookup *params,
 			       u32 flags, bool check_mtu)
 {
 	struct fib_nh_common *nhc;
 	struct in_device *in_dev;
 	struct neighbour *neigh;
-	struct net_device *dev;
 	struct fib_result res;
 	struct flowi4 fl4;
 	int err;
 	u32 mtu;
 
-	dev = dev_get_by_index_rcu(net, params->ifindex);
-	if (unlikely(!dev))
-		return -ENODEV;
-
 	/* verify forwarding is enabled on this interface */
 	in_dev = __in_dev_get_rcu(dev);
 	if (unlikely(!in_dev || !IN_DEV_FORWARD(in_dev)))
@@ -5418,14 +5414,14 @@  static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
 #endif
 
 #if IS_ENABLED(CONFIG_IPV6)
-static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
+static int bpf_ipv6_fib_lookup(struct net *net, struct net_device *dev,
+			       struct bpf_fib_lookup *params,
 			       u32 flags, bool check_mtu)
 {
 	struct in6_addr *src = (struct in6_addr *) params->ipv6_src;
 	struct in6_addr *dst = (struct in6_addr *) params->ipv6_dst;
 	struct fib6_result res = {};
 	struct neighbour *neigh;
-	struct net_device *dev;
 	struct inet6_dev *idev;
 	struct flowi6 fl6;
 	int strict = 0;
@@ -5436,10 +5432,6 @@  static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
 	if (rt6_need_strict(dst) || rt6_need_strict(src))
 		return BPF_FIB_LKUP_RET_NOT_FWDED;
 
-	dev = dev_get_by_index_rcu(net, params->ifindex);
-	if (unlikely(!dev))
-		return -ENODEV;
-
 	idev = __in6_dev_get_safely(dev);
 	if (unlikely(!idev || !idev->cnf.forwarding))
 		return BPF_FIB_LKUP_RET_FWD_DISABLED;
@@ -5533,22 +5525,27 @@  static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
 BPF_CALL_4(bpf_xdp_fib_lookup, struct xdp_buff *, ctx,
 	   struct bpf_fib_lookup *, params, int, plen, u32, flags)
 {
+	struct net *net = dev_net(ctx->rxq->dev);
+	struct net_device *dev;
+
 	if (plen < sizeof(*params))
 		return -EINVAL;
 
 	if (flags & ~(BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_OUTPUT))
 		return -EINVAL;
 
+	dev = dev_get_by_index_rcu(net, params->ifindex);
+	if (unlikely(!dev))
+		return -ENODEV;
+
 	switch (params->family) {
 #if IS_ENABLED(CONFIG_INET)
 	case AF_INET:
-		return bpf_ipv4_fib_lookup(dev_net(ctx->rxq->dev), params,
-					   flags, true);
+		return bpf_ipv4_fib_lookup(net, dev, params, flags, true);
 #endif
 #if IS_ENABLED(CONFIG_IPV6)
 	case AF_INET6:
-		return bpf_ipv6_fib_lookup(dev_net(ctx->rxq->dev), params,
-					   flags, true);
+		return bpf_ipv6_fib_lookup(net, dev, params, flags, true);
 #endif
 	}
 	return -EAFNOSUPPORT;
@@ -5568,7 +5565,9 @@  BPF_CALL_4(bpf_skb_fib_lookup, struct sk_buff *, skb,
 	   struct bpf_fib_lookup *, params, int, plen, u32, flags)
 {
 	struct net *net = dev_net(skb->dev);
+	struct net_device *dev;
 	int rc = -EAFNOSUPPORT;
+	bool check_mtu = false;
 
 	if (plen < sizeof(*params))
 		return -EINVAL;
@@ -5576,23 +5575,30 @@  BPF_CALL_4(bpf_skb_fib_lookup, struct sk_buff *, skb,
 	if (flags & ~(BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_OUTPUT))
 		return -EINVAL;
 
+	dev = dev_get_by_index_rcu(net, params->ifindex);
+	if (unlikely(!dev))
+		return -ENODEV;
+
+	if (params->tot_len)
+		check_mtu = true;
+
 	switch (params->family) {
 #if IS_ENABLED(CONFIG_INET)
 	case AF_INET:
-		rc = bpf_ipv4_fib_lookup(net, params, flags, false);
+		rc = bpf_ipv4_fib_lookup(net, dev, params, flags, check_mtu);
 		break;
 #endif
 #if IS_ENABLED(CONFIG_IPV6)
 	case AF_INET6:
-		rc = bpf_ipv6_fib_lookup(net, params, flags, false);
+		rc = bpf_ipv6_fib_lookup(net, dev, params, flags, check_mtu);
 		break;
 #endif
 	}
 
-	if (!rc) {
-		struct net_device *dev;
-
-		dev = dev_get_by_index_rcu(net, params->ifindex);
+	if (rc == BPF_FIB_LKUP_RET_SUCCESS && !check_mtu) {
+		/* When tot_len isn't provided by user,
+		 * check skb against net_device MTU
+		 */
 		if (!is_skb_forwardable(dev, skb))
 			rc = BPF_FIB_LKUP_RET_FRAG_NEEDED;
 	}