diff mbox series

[net,1/1] net: stmmac: set TxQ mode back to DCB after disabling CBS

Message ID 1612447396-20351-1-git-send-email-yoong.siang.song@intel.com (mailing list archive)
State Accepted
Commit f317e2ea8c88737aa36228167b2292baef3f0430
Delegated to: Netdev Maintainers
Headers show
Series [net,1/1] net: stmmac: set TxQ mode back to DCB after disabling CBS | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 9 of 9 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 2 this patch: 2
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 13 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 2 this patch: 2
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Song, Yoong Siang Feb. 4, 2021, 2:03 p.m. UTC
From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>

When disable CBS, mode_to_use parameter is not updated even the operation
mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
when tc_setup_cbs() function is called to re-enable CBS, the operation
mode of Tx Queue remains at DCB, which causing CBS fails to work.

This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB
after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode()
callback function.

Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
Suggested-by: Gomes, Vinicius <vinicius.gomes@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Comments

Jesse Brandeburg Feb. 5, 2021, 1:08 a.m. UTC | #1
Song Yoong Siang wrote:

> From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
> 
> When disable CBS, mode_to_use parameter is not updated even the operation
> mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
> when tc_setup_cbs() function is called to re-enable CBS, the operation
> mode of Tx Queue remains at DCB, which causing CBS fails to work.
> 
> This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB
> after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode()
> callback function.
> 
> Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
> Suggested-by: Gomes, Vinicius <vinicius.gomes@intel.com>
> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
> Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com>

Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Vinicius Costa Gomes Feb. 5, 2021, 10:38 p.m. UTC | #2
Song Yoong Siang <yoong.siang.song@intel.com> writes:

> From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
>
> When disable CBS, mode_to_use parameter is not updated even the operation
> mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
> when tc_setup_cbs() function is called to re-enable CBS, the operation
> mode of Tx Queue remains at DCB, which causing CBS fails to work.
>
> This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB
> after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode()
> callback function.
>
> Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")
> Suggested-by: Gomes, Vinicius <vinicius.gomes@intel.com>

Just a nitpick/formality, I would prefer if you used:

Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>

> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
> Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com>

Patch looks good.

Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>

Cheers,
patchwork-bot+netdevbpf@kernel.org Feb. 6, 2021, 4:10 a.m. UTC | #3
Hello:

This patch was applied to netdev/net.git (refs/heads/master):

On Thu,  4 Feb 2021 22:03:16 +0800 you wrote:
> From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
> 
> When disable CBS, mode_to_use parameter is not updated even the operation
> mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore,
> when tc_setup_cbs() function is called to re-enable CBS, the operation
> mode of Tx Queue remains at DCB, which causing CBS fails to work.
> 
> [...]

Here is the summary with links:
  - [net,1/1] net: stmmac: set TxQ mode back to DCB after disabling CBS
    https://git.kernel.org/netdev/net/c/f317e2ea8c88

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 8ed3b2c..5698554 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -324,7 +324,12 @@  static int tc_setup_cbs(struct stmmac_priv *priv,
 
 		priv->plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
 	} else if (!qopt->enable) {
-		return stmmac_dma_qmode(priv, priv->ioaddr, queue, MTL_QUEUE_DCB);
+		ret = stmmac_dma_qmode(priv, priv->ioaddr, queue,
+				       MTL_QUEUE_DCB);
+		if (ret)
+			return ret;
+
+		priv->plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
 	}
 
 	/* Port Transmit Rate and Speed Divider */