diff mbox series

[bpf,V3,2/2] selftests/bpf: Tests using bpf_check_mtu BPF-helper input mtu_len param

Message ID 161521556358.3515614.5915221479709358964.stgit@firesoul (mailing list archive)
State Accepted
Commit e5e010a3063ad801cb3f85793cbada9c2a654e40
Delegated to: BPF
Headers show
Series bpf: Updates for BPF-helper bpf_check_mtu | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present fail Series targets non-next tree, but doesn't contain any Fixes tags
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for bpf
netdev/subject_prefix success Link
netdev/cc_maintainers warning 13 maintainers not CCed: linux-kselftest@vger.kernel.org yhs@fb.com kpsingh@kernel.org daniel@iogearbox.net andrii@kernel.org hawk@kernel.org kafai@fb.com ast@kernel.org john.fastabend@gmail.com songliubraving@fb.com davem@davemloft.net shuah@kernel.org kuba@kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 117 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Jesper Dangaard Brouer March 8, 2021, 2:59 p.m. UTC 
Add tests that use mtu_len as input parameter in BPF-helper
bpf_check_mtu().

The BPF-helper is avail from both XDP and TC context. Add two tests
per context, one that tests below MTU and one that exceeds the MTU.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
---
 tools/testing/selftests/bpf/prog_tests/check_mtu.c |    4 +
 tools/testing/selftests/bpf/progs/test_check_mtu.c |   92 ++++++++++++++++++++
 2 files changed, 96 insertions(+)
diff mbox series

Patch

diff --git a/tools/testing/selftests/bpf/prog_tests/check_mtu.c b/tools/testing/selftests/bpf/prog_tests/check_mtu.c
index 36af1c138faf..b62a39315336 100644
--- a/tools/testing/selftests/bpf/prog_tests/check_mtu.c
+++ b/tools/testing/selftests/bpf/prog_tests/check_mtu.c
@@ -128,6 +128,8 @@  static void test_check_mtu_xdp(__u32 mtu, __u32 ifindex)
 	test_check_mtu_run_xdp(skel, skel->progs.xdp_use_helper, mtu);
 	test_check_mtu_run_xdp(skel, skel->progs.xdp_exceed_mtu, mtu);
 	test_check_mtu_run_xdp(skel, skel->progs.xdp_minus_delta, mtu);
+	test_check_mtu_run_xdp(skel, skel->progs.xdp_input_len, mtu);
+	test_check_mtu_run_xdp(skel, skel->progs.xdp_input_len_exceed, mtu);
 
 cleanup:
 	test_check_mtu__destroy(skel);
@@ -187,6 +189,8 @@  static void test_check_mtu_tc(__u32 mtu, __u32 ifindex)
 	test_check_mtu_run_tc(skel, skel->progs.tc_exceed_mtu, mtu);
 	test_check_mtu_run_tc(skel, skel->progs.tc_exceed_mtu_da, mtu);
 	test_check_mtu_run_tc(skel, skel->progs.tc_minus_delta, mtu);
+	test_check_mtu_run_tc(skel, skel->progs.tc_input_len, mtu);
+	test_check_mtu_run_tc(skel, skel->progs.tc_input_len_exceed, mtu);
 cleanup:
 	test_check_mtu__destroy(skel);
 }
diff --git a/tools/testing/selftests/bpf/progs/test_check_mtu.c b/tools/testing/selftests/bpf/progs/test_check_mtu.c
index b7787b43f9db..c4a9bae96e75 100644
--- a/tools/testing/selftests/bpf/progs/test_check_mtu.c
+++ b/tools/testing/selftests/bpf/progs/test_check_mtu.c
@@ -105,6 +105,54 @@  int xdp_minus_delta(struct xdp_md *ctx)
 	return retval;
 }
 
+SEC("xdp")
+int xdp_input_len(struct xdp_md *ctx)
+{
+	int retval = XDP_PASS; /* Expected retval on successful test */
+	void *data_end = (void *)(long)ctx->data_end;
+	void *data = (void *)(long)ctx->data;
+	__u32 ifindex = GLOBAL_USER_IFINDEX;
+	__u32 data_len = data_end - data;
+
+	/* API allow user give length to check as input via mtu_len param,
+	 * resulting MTU value is still output in mtu_len param after call.
+	 *
+	 * Input len is L3, like MTU and iph->tot_len.
+	 * Remember XDP data_len is L2.
+	 */
+	__u32 mtu_len = data_len - ETH_HLEN;
+
+	if (bpf_check_mtu(ctx, ifindex, &mtu_len, 0, 0))
+		retval = XDP_ABORTED;
+
+	global_bpf_mtu_xdp = mtu_len;
+	return retval;
+}
+
+SEC("xdp")
+int xdp_input_len_exceed(struct xdp_md *ctx)
+{
+	int retval = XDP_ABORTED; /* Fail */
+	__u32 ifindex = GLOBAL_USER_IFINDEX;
+	int err;
+
+	/* API allow user give length to check as input via mtu_len param,
+	 * resulting MTU value is still output in mtu_len param after call.
+	 *
+	 * Input length value is L3 size like MTU.
+	 */
+	__u32 mtu_len = GLOBAL_USER_MTU;
+
+	mtu_len += 1; /* Exceed with 1 */
+
+	err = bpf_check_mtu(ctx, ifindex, &mtu_len, 0, 0);
+	if (err == BPF_MTU_CHK_RET_FRAG_NEEDED)
+		retval = XDP_PASS ; /* Success in exceeding MTU check */
+
+	global_bpf_mtu_xdp = mtu_len;
+	return retval;
+}
+
 SEC("classifier")
 int tc_use_helper(struct __sk_buff *ctx)
 {
@@ -196,3 +244,47 @@  int tc_minus_delta(struct __sk_buff *ctx)
 	global_bpf_mtu_xdp = mtu_len;
 	return retval;
 }
+
+SEC("classifier")
+int tc_input_len(struct __sk_buff *ctx)
+{
+	int retval = BPF_OK; /* Expected retval on successful test */
+	__u32 ifindex = GLOBAL_USER_IFINDEX;
+
+	/* API allow user give length to check as input via mtu_len param,
+	 * resulting MTU value is still output in mtu_len param after call.
+	 *
+	 * Input length value is L3 size.
+	 */
+	__u32 mtu_len = GLOBAL_USER_MTU;
+
+	if (bpf_check_mtu(ctx, ifindex, &mtu_len, 0, 0))
+		retval = BPF_DROP;
+
+	global_bpf_mtu_xdp = mtu_len;
+	return retval;
+}
+
+SEC("classifier")
+int tc_input_len_exceed(struct __sk_buff *ctx)
+{
+	int retval = BPF_DROP; /* Fail */
+	__u32 ifindex = GLOBAL_USER_IFINDEX;
+	int err;
+
+	/* API allow user give length to check as input via mtu_len param,
+	 * resulting MTU value is still output in mtu_len param after call.
+	 *
+	 * Input length value is L3 size like MTU.
+	 */
+	__u32 mtu_len = GLOBAL_USER_MTU;
+
+	mtu_len += 1; /* Exceed with 1 */
+
+	err = bpf_check_mtu(ctx, ifindex, &mtu_len, 0, 0);
+	if (err == BPF_MTU_CHK_RET_FRAG_NEEDED)
+		retval = BPF_OK; /* Success in exceeding MTU check */
+
+	global_bpf_mtu_xdp = mtu_len;
+	return retval;
+}