diff mbox series

[net-next,2/4] net: hns3: add get/set pause parameters support for imp-controlled PHYs

Message ID 1615539016-45698-3-git-send-email-tanhuazhong@huawei.com (mailing list archive)
State Accepted
Commit 57a8f46b1bd3f5f43b06f48aab7c1f7ca0936be3
Delegated to: Netdev Maintainers
Headers show
Series net: hns3: support imp-controlled PHYs | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 4 maintainers not CCed: liuyonglong@huawei.com moyufeng@huawei.com liaoguojia@huawei.com shenjian15@huawei.com
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 28 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Huazhong Tan March 12, 2021, 8:50 a.m. UTC 
From: Guangbin Huang <huangguangbin2@huawei.com>

When the imp-controlled PHYs feature is enabled, phydev is NULL.
In this case, the autoneg is always off when user uses ethtool -a
command to get pause parameters because  hclge_get_pauseparam()
uses phydev to check whether device is TP port. To fit this new
feature, use media type to check whether device is TP port.

And when user set pause parameters, these parameters need to
always set to mac, no matter whether autoneg is off.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a39afcd..dbca489 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10158,9 +10158,10 @@  static void hclge_get_pauseparam(struct hnae3_handle *handle, u32 *auto_neg,
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
-	struct phy_device *phydev = hdev->hw.mac.phydev;
+	u8 media_type = hdev->hw.mac.media_type;
 
-	*auto_neg = phydev ? hclge_get_autoneg(handle) : 0;
+	*auto_neg = (media_type == HNAE3_MEDIA_TYPE_COPPER) ?
+		    hclge_get_autoneg(handle) : 0;
 
 	if (hdev->tm_info.fc_mode == HCLGE_FC_PFC) {
 		*rx_en = 0;
@@ -10206,7 +10207,7 @@  static int hclge_set_pauseparam(struct hnae3_handle *handle, u32 auto_neg,
 	struct phy_device *phydev = hdev->hw.mac.phydev;
 	u32 fc_autoneg;
 
-	if (phydev) {
+	if (phydev || hnae3_dev_phy_imp_supported(hdev)) {
 		fc_autoneg = hclge_get_autoneg(handle);
 		if (auto_neg != fc_autoneg) {
 			dev_info(&hdev->pdev->dev,
@@ -10225,7 +10226,7 @@  static int hclge_set_pauseparam(struct hnae3_handle *handle, u32 auto_neg,
 
 	hclge_record_user_pauseparam(hdev, rx_en, tx_en);
 
-	if (!auto_neg)
+	if (!auto_neg || hnae3_dev_phy_imp_supported(hdev))
 		return hclge_cfg_pauseparam(hdev, rx_en, tx_en);
 
 	if (phydev)