@@ -1556,8 +1556,8 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
plen0 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
B44_ETHIPV4UDP_HLEN);
- bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE, B44_PATTERN_BASE);
- bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE, B44_PMASK_BASE);
+ bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE, B44_PATTERN_BASE);
+ bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE, B44_PMASK_BASE);
/* Raw ethernet II magic packet pattern - pattern 1 */
memset(pwol_pattern, 0, B44_PATTERN_SIZE);
@@ -1565,9 +1565,9 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
plen1 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
ETH_HLEN);
- bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
+ bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
B44_PATTERN_BASE + B44_PATTERN_SIZE);
- bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
+ bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
B44_PMASK_BASE + B44_PMASK_SIZE);
/* Ipv6 magic packet pattern - pattern 2 */
@@ -1576,9 +1576,9 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
plen2 = b44_magic_pattern(bp->dev->dev_addr, pwol_pattern, pwol_mask,
B44_ETHIPV6UDP_HLEN);
- bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
+ bwfilter_table(bp, pwol_pattern, B44_PATTERN_SIZE,
B44_PATTERN_BASE + B44_PATTERN_SIZE + B44_PATTERN_SIZE);
- bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
+ bwfilter_table(bp, pwol_mask, B44_PMASK_SIZE,
B44_PMASK_BASE + B44_PMASK_SIZE + B44_PMASK_SIZE);
kfree(pwol_pattern);
@@ -1631,9 +1631,9 @@ static void b44_setup_wol(struct b44 *bp)
val = br32(bp, B44_DEVCTRL);
bw32(bp, B44_DEVCTRL, val | DEVCTRL_MPM | DEVCTRL_PFE);
- } else {
- b44_setup_pseudo_magicp(bp);
- }
+ } else {
+ b44_setup_pseudo_magicp(bp);
+ }
b44_setup_wol_pci(bp);
}
@@ -1757,7 +1757,7 @@ static void __b44_set_rx_mode(struct net_device *dev)
__b44_cam_write(bp, zero, i);
bw32(bp, B44_RXCONFIG, val);
- val = br32(bp, B44_CAM_CTRL);
+ val = br32(bp, B44_CAM_CTRL);
bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
}
}
@@ -572,7 +572,7 @@ bnx2_write_phy(struct bnx2 *bp, u32 reg, u32 val)
}
if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)
- ret = -EBUSY;
+ ret = -EBUSY;
else
ret = 0;
@@ -3599,7 +3599,7 @@ bnx2_set_rx_mode(struct net_device *dev)
for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
BNX2_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4),
0xffffffff);
- }
+ }
sort_mode |= BNX2_RPM_SORT_USER0_MC_EN;
}
else {
@@ -4674,7 +4674,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
if (addr == page_end-4) {
cmd_flags = BNX2_NVM_COMMAND_LAST;
- }
+ }
rc = bnx2_nvram_write_dword(bp, addr,
&flash_buffer[i], cmd_flags);
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by: Hui Tang <tanghui20@huawei.com> --- drivers/net/ethernet/broadcom/b44.c | 20 ++++++++++---------- drivers/net/ethernet/broadcom/bnx2.c | 6 +++--- 2 files changed, 13 insertions(+), 13 deletions(-)