@@ -832,8 +832,8 @@ static struct net_device_stats *de_get_stats(struct net_device *dev)
/* The chip only need report frame silently dropped. */
spin_lock_irq(&de->lock);
- if (netif_running(dev) && netif_device_present(dev))
- __de_get_stats(de);
+ if (netif_running(dev) && netif_device_present(dev))
+ __de_get_stats(de);
spin_unlock_irq(&de->lock);
return &dev->stats;
@@ -396,7 +396,7 @@
<earl@exis.net>.
Updated the PCI interface to conform with the latest
version. I hope nothing is broken...
- Add TX done interrupt modification from suggestion
+ Add TX done interrupt modification from suggestion
by <Austin.Donnelly@cl.cam.ac.uk>.
Fix is_anc_capable() bug reported by
<Austin.Donnelly@cl.cam.ac.uk>.
@@ -1499,7 +1499,7 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
spin_lock_irqsave(&lp->lock, flags);
netif_stop_queue(dev);
load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
- lp->stats.tx_bytes += skb->len;
+ lp->stats.tx_bytes += skb->len;
outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
@@ -1651,7 +1651,7 @@ de4x5_rx(struct net_device *dev)
/* Update stats */
lp->stats.rx_packets++;
- lp->stats.rx_bytes += pkt_len;
+ lp->stats.rx_bytes += pkt_len;
}
}
@@ -518,7 +518,7 @@ static void dmfe_remove_one(struct pci_dev *pdev)
DMFE_DBUG(0, "dmfe_remove_one()", 0);
- if (dev) {
+ if (dev) {
unregister_netdev(dev);
pci_iounmap(db->pdev, db->ioaddr);
@@ -567,10 +567,10 @@ static int dmfe_open(struct net_device *dev)
/* CR6 operation mode decision */
if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
(db->chip_revision >= 0x30) ) {
- db->cr6_data |= DMFE_TXTH_256;
+ db->cr6_data |= DMFE_TXTH_256;
db->cr0_data = CR0_DEFAULT;
db->dm910x_chk_mode=4; /* Enter the normal mode */
- } else {
+ } else {
db->cr6_data |= CR6_SFT; /* Store & Forward mode */
db->cr0_data = 0;
db->dm910x_chk_mode = 1; /* Enter the check mode */
@@ -903,7 +903,7 @@ static void dmfe_free_tx_pkt(struct net_device *dev, struct dmfe_board_info *db)
}
}
- txptr = txptr->next_tx_desc;
+ txptr = txptr->next_tx_desc;
}/* End of while */
/* Update TX remove pointer to next */
@@ -1121,7 +1121,7 @@ static void dmfe_timer(struct timer_list *t)
void __iomem *ioaddr = db->ioaddr;
u32 tmp_cr8;
unsigned char tmp_cr12;
- unsigned long flags;
+ unsigned long flags;
int link_ok, link_ok_phy;
@@ -1217,7 +1217,7 @@ static void dmfe_timer(struct timer_list *t)
if (link_ok_phy != link_ok) {
DMFE_DBUG (0, "PHY and chip report different link status", 0);
link_ok = link_ok | link_ok_phy;
- }
+ }
if ( !link_ok && netif_carrier_ok(dev)) {
/* Link Failed */
@@ -1699,14 +1699,14 @@ static void dmfe_set_phyxcer(struct dmfe_board_info *db)
if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61;
}
- /* Write new capability to Phyxcer Reg4 */
+ /* Write new capability to Phyxcer Reg4 */
if ( !(phy_reg & 0x01e0)) {
phy_reg|=db->PHY_reg4;
db->media_mode|=DMFE_AUTO;
}
dmfe_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
- /* Restart Auto-Negotiation */
+ /* Restart Auto-Negotiation */
if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
dmfe_phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id);
if ( !db->chip_type )
@@ -1754,7 +1754,7 @@ static void dmfe_process_mode(struct dmfe_board_info *db)
}
dmfe_phy_write(db->ioaddr,
db->phy_addr, 0, phy_reg, db->chip_id);
- if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
+ if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
mdelay(20);
dmfe_phy_write(db->ioaddr,
db->phy_addr, 0, phy_reg, db->chip_id);
@@ -351,7 +351,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
del_timer_sync(&tp->timer);
pnic2_start_nway(dev);
tp->timer.expires = RUN_AT(3*HZ);
- add_timer(&tp->timer);
+ add_timer(&tp->timer);
}
return;
@@ -375,7 +375,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
del_timer_sync(&tp->timer);
pnic2_start_nway(dev);
tp->timer.expires = RUN_AT(3*HZ);
- add_timer(&tp->timer);
+ add_timer(&tp->timer);
}
return;
@@ -780,7 +780,7 @@ static void uli526x_free_tx_pkt(struct net_device *dev,
}
}
- txptr = txptr->next_tx_desc;
+ txptr = txptr->next_tx_desc;
}/* End of while */
/* Update TX remove pointer to next */
@@ -1015,7 +1015,7 @@ static void uli526x_timer(struct timer_list *t)
struct net_device *dev = pci_get_drvdata(db->pdev);
struct uli_phy_ops *phy = &db->phy;
void __iomem *ioaddr = db->ioaddr;
- unsigned long flags;
+ unsigned long flags;
u8 tmp_cr12 = 0;
u32 tmp_cr8;
@@ -1535,14 +1535,14 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
}
- /* Write new capability to Phyxcer Reg4 */
+ /* Write new capability to Phyxcer Reg4 */
if ( !(phy_reg & 0x01e0)) {
phy_reg|=db->PHY_reg4;
db->media_mode|=ULI526X_AUTO;
}
phy->write(db, db->phy_addr, 4, phy_reg);
- /* Restart Auto-Negotiation */
+ /* Restart Auto-Negotiation */
phy->write(db, db->phy_addr, 0, 0x1200);
udelay(50);
}
@@ -1550,7 +1550,7 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
/*
* Process op-mode
- AUTO mode : PHY controller in Auto-negotiation Mode
+ AUTO mode : PHY controller in Auto-negotiation Mode
* Force mode: PHY controller in force mode with HUB
* N-way force capability with SWITCH
*/
@@ -36,7 +36,7 @@
power management.
support for big endian descriptors
Copyright (C) 2001 Manfred Spraul
- * ethtool support (jgarzik)
+ * ethtool support (jgarzik)
* Replace some MII-related magic numbers with constants (jgarzik)
TODO:
@@ -1479,7 +1479,7 @@ static int netdev_close(struct net_device *dev)
np->cur_rx, np->dirty_rx);
}
- /* Stop the chip's Tx and Rx processes. */
+ /* Stop the chip's Tx and Rx processes. */
spin_lock_irq(&np->lock);
netif_device_detach(dev);
update_csr6(dev, 0);
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by: Hui Tang <tanghui20@huawei.com> --- drivers/net/ethernet/dec/tulip/de2104x.c | 4 ++-- drivers/net/ethernet/dec/tulip/de4x5.c | 6 +++--- drivers/net/ethernet/dec/tulip/dmfe.c | 18 +++++++++--------- drivers/net/ethernet/dec/tulip/pnic2.c | 4 ++-- drivers/net/ethernet/dec/tulip/uli526x.c | 10 +++++----- drivers/net/ethernet/dec/tulip/winbond-840.c | 4 ++-- 6 files changed, 23 insertions(+), 23 deletions(-)