diff mbox series

[net-next,5/6] net: hostess_sv11: fix the comments style issue

Message ID 1623941615-26966-6-git-send-email-lipeng321@huawei.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: hostess_sv11: clean up some code style issues | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 4 of 4 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 136 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

lipeng (Y) June 17, 2021, 2:53 p.m. UTC 
Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.

Signed-off-by: Peng Li <lipeng321@huawei.com>
---
 drivers/net/wan/hostess_sv11.c | 48 +++++++++++++++++-------------------------
 1 file changed, 19 insertions(+), 29 deletions(-)

Comments

Andrew Lunn June 17, 2021, 4:29 p.m. UTC | #1 
> @@ -152,12 +146,12 @@ static int hostess_close(struct net_device *d)
>  static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
>  {
>  	/* struct z8530_dev *sv11=dev_to_sv(d);
> -	   z8530_ioctl(d,&sv11->chanA,ifr,cmd) */
> +	 * z8530_ioctl(d,&sv11->chanA,ifr,cmd)
> +	 */
>  	return hdlc_ioctl(d, ifr, cmd);
>  }

That looks more like dead code than anything else. I would suggest you
do a git blame to see if there is anything interesting about this, and
if not, remove it.

   Andrew
lipeng (Y) June 18, 2021, 12:45 a.m. UTC | #2 
在 2021/6/18 0:29, Andrew Lunn 写道:
>> @@ -152,12 +146,12 @@ static int hostess_close(struct net_device *d)
>>   static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
>>   {
>>   	/* struct z8530_dev *sv11=dev_to_sv(d);
>> -	   z8530_ioctl(d,&sv11->chanA,ifr,cmd) */
>> +	 * z8530_ioctl(d,&sv11->chanA,ifr,cmd)
>> +	 */
>>   	return hdlc_ioctl(d, ifr, cmd);
>>   }
> That looks more like dead code than anything else. I would suggest you
> do a git blame to see if there is anything interesting about this, and
> if not, remove it.
>
>     Andrew
> .

Hi,  Andrew

It's  dead code,  will remove it.

Thanks for your advice.

         Peng Li
diff mbox series

Patch

diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 7a59d7e..4085590 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -44,8 +44,7 @@ 
 
 static int dma;
 
-/*
- *	Network driver support routines
+/*	Network driver support routines
  */
 
 static inline struct z8530_dev *dev_to_sv(struct net_device *dev)
@@ -53,8 +52,7 @@  static inline struct z8530_dev *dev_to_sv(struct net_device *dev)
 	return (struct z8530_dev *)dev_to_hdlc(dev)->priv;
 }
 
-/*
- *	Frame receive. Simple for our card as we do HDLC and there
+/*	Frame receive. Simple for our card as we do HDLC and there
  *	is no funny garbage involved
  */
 
@@ -65,15 +63,13 @@  static void hostess_input(struct z8530_channel *c, struct sk_buff *skb)
 	skb->protocol = hdlc_type_trans(skb, c->netdevice);
 	skb_reset_mac_header(skb);
 	skb->dev = c->netdevice;
-	/*
-	 *	Send it to the PPP layer. We don't have time to process
+	/*	Send it to the PPP layer. We don't have time to process
 	 *	it right now.
 	 */
 	netif_rx(skb);
 }
 
-/*
- *	We've been placed in the UP state
+/*	We've been placed in the UP state
  */
 
 static int hostess_open(struct net_device *d)
@@ -81,8 +77,7 @@  static int hostess_open(struct net_device *d)
 	struct z8530_dev *sv11 = dev_to_sv(d);
 	int err = -1;
 
-	/*
-	 *	Link layer up
+	/*	Link layer up
 	 */
 	switch (dma) {
 	case 0:
@@ -127,8 +122,7 @@  static int hostess_open(struct net_device *d)
 static int hostess_close(struct net_device *d)
 {
 	struct z8530_dev *sv11 = dev_to_sv(d);
-	/*
-	 *	Discard new frames
+	/*	Discard new frames
 	 */
 	sv11->chanA.rx_function = z8530_null_rx;
 
@@ -152,12 +146,12 @@  static int hostess_close(struct net_device *d)
 static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 {
 	/* struct z8530_dev *sv11=dev_to_sv(d);
-	   z8530_ioctl(d,&sv11->chanA,ifr,cmd) */
+	 * z8530_ioctl(d,&sv11->chanA,ifr,cmd)
+	 */
 	return hdlc_ioctl(d, ifr, cmd);
 }
 
-/*
- *	Passed network frames, fire them downwind.
+/*	Passed network frames, fire them downwind.
  */
 
 static netdev_tx_t hostess_queue_xmit(struct sk_buff *skb,
@@ -174,8 +168,7 @@  static int hostess_attach(struct net_device *dev, unsigned short encoding,
 	return -EINVAL;
 }
 
-/*
- *	Description block for a Comtrol Hostess SV11 card
+/*	Description block for a Comtrol Hostess SV11 card
  */
 
 static const struct net_device_ops hostess_ops = {
@@ -189,8 +182,7 @@  static struct z8530_dev *sv11_init(int iobase, int irq)
 {
 	struct z8530_dev *sv;
 	struct net_device *netdev;
-	/*
-	 *	Get the needed I/O space
+	/*	Get the needed I/O space
 	 */
 
 	if (!request_region(iobase, 8, "Comtrol SV11")) {
@@ -202,8 +194,7 @@  static struct z8530_dev *sv11_init(int iobase, int irq)
 	if (!sv)
 		goto err_kzalloc;
 
-	/*
-	 *	Stuff in the I/O addressing
+	/*	Stuff in the I/O addressing
 	 */
 
 	sv->active = 0;
@@ -218,7 +209,8 @@  static struct z8530_dev *sv11_init(int iobase, int irq)
 	outb(0, iobase + 4);		/* DMA off */
 
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
-	   IRQ ;) - This is one driver RtLinux is made for */
+	 * IRQ ;) - This is one driver RtLinux is made for
+	 */
 
 	if (request_irq(irq, z8530_interrupt, 0,
 			"Hostess SV11", sv) < 0) {
@@ -232,8 +224,7 @@  static struct z8530_dev *sv11_init(int iobase, int irq)
 	sv->chanB.dev = sv;
 
 	if (dma) {
-		/*
-		 *	You can have DMA off or 1 and 3 thats the lot
+		/*	You can have DMA off or 1 and 3 thats the lot
 		 *	on the Comtrol.
 		 */
 		sv->chanA.txdma = 3;
@@ -248,11 +239,11 @@  static struct z8530_dev *sv11_init(int iobase, int irq)
 	}
 
 	/* Kill our private IRQ line the hostess can end up chattering
-	   until the configuration is set */
+	 * until the configuration is set
+	 */
 	disable_irq(irq);
 
-	/*
-	 *	Begin normal initialise
+	/*	Begin normal initialise
 	 */
 
 	if (z8530_init(sv)) {
@@ -268,8 +259,7 @@  static struct z8530_dev *sv11_init(int iobase, int irq)
 
 	enable_irq(irq);
 
-	/*
-	 *	Now we can take the IRQ
+	/*	Now we can take the IRQ
 	 */
 
 	sv->chanA.netdevice = netdev = alloc_hdlcdev(sv);