diff mbox series

octeontx2-pf: Add check for non zero mcam flows

Message ID 1629447459-3898-1-git-send-email-sbhatta@marvell.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series octeontx2-pf: Add check for non zero mcam flows | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 43 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 4 this patch: 4
netdev/header_inline success Link

Commit Message

Subbaraya Sundeep Aug. 20, 2021, 8:17 a.m. UTC 
From: Sunil Goutham <sgoutham@marvell.com>

This patch ensures that mcam flows are allocated
before adding or destroying the flows.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c |  9 +++++++++
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c    | 16 ++++++++++++++++
 2 files changed, 25 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
index 2a25588..55802b5 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
@@ -972,6 +972,12 @@  int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc)
 	int err = 0;
 	u32 ring;
 
+	if (!flow_cfg->max_flows) {
+		netdev_err(pfvf->netdev,
+			   "Ntuple rule count is 0, allocate and retry\n");
+		return -EINVAL;
+	}
+
 	ring = ethtool_get_flow_spec_ring(fsp->ring_cookie);
 	if (!(pfvf->flags & OTX2_FLAG_NTUPLE_SUPPORT))
 		return -ENOMEM;
@@ -1183,6 +1189,9 @@  int otx2_destroy_ntuple_flows(struct otx2_nic *pfvf)
 	if (!(pfvf->flags & OTX2_FLAG_NTUPLE_SUPPORT))
 		return 0;
 
+	if (!flow_cfg->max_flows)
+		return 0;
+
 	mutex_lock(&pfvf->mbox.lock);
 	req = otx2_mbox_alloc_msg_npc_delete_flow(&pfvf->mbox);
 	if (!req) {
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 7dd56c9..6fe6b8d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1860,6 +1860,22 @@  static int otx2_set_features(struct net_device *netdev,
 	if ((changed & NETIF_F_NTUPLE) && !ntuple)
 		otx2_destroy_ntuple_flows(pf);
 
+	if ((changed & NETIF_F_NTUPLE) && ntuple) {
+		if (!pf->flow_cfg->max_flows) {
+			netdev_err(netdev,
+				   "Can't enable NTUPLE, MCAM entries not allocated\n");
+			return -EINVAL;
+		}
+	}
+
+	if ((changed & NETIF_F_HW_TC) && tc) {
+		if (!pf->flow_cfg->max_flows) {
+			netdev_err(netdev,
+				   "Can't enable TC, MCAM entries not allocated\n");
+			return -EINVAL;
+		}
+	}
+
 	if ((changed & NETIF_F_HW_TC) && !tc &&
 	    pf->flow_cfg && pf->flow_cfg->nr_flows) {
 		netdev_err(netdev, "Can't disable TC hardware offload while flows are active\n");