diff mbox series

[net-next,1/2] octeontx2-pf: Enable promisc/allmulti match MCAM entries.

Message ID 1632851026-5415-2-git-send-email-sbhatta@marvell.com (mailing list archive)
State Accepted
Commit ffd2f89ad05cd620d822112a07b0c5669fa9e333
Delegated to: Netdev Maintainers
Headers show
Series Add PTP support for VFs | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 105 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 4 this patch: 4
netdev/header_inline success Link

Commit Message

Subbaraya Sundeep Sept. 28, 2021, 5:43 p.m. UTC 
From: Rakesh Babu <rsaladi2@marvell.com>

Whenever the interface is brought up/down then set_rx_mode
function is called by the stack which enables promisc/allmulti
MCAM entries. But there are cases when driver brings
interface down and then up such as while changing number
of channels. In these cases promisc/allmulti MCAM entries
are left disabled as set_rx_mode callback is not called.
This patch enables these MCAM entries in all such cases.

Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   | 78 ++++++++++++----------
 1 file changed, 43 insertions(+), 35 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 53df7ff..53a3e8d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1493,6 +1493,44 @@  static void otx2_free_hw_resources(struct otx2_nic *pf)
 	mutex_unlock(&mbox->lock);
 }
 
+static void otx2_do_set_rx_mode(struct otx2_nic *pf)
+{
+	struct net_device *netdev = pf->netdev;
+	struct nix_rx_mode *req;
+	bool promisc = false;
+
+	if (!(netdev->flags & IFF_UP))
+		return;
+
+	if ((netdev->flags & IFF_PROMISC) ||
+	    (netdev_uc_count(netdev) > OTX2_MAX_UNICAST_FLOWS)) {
+		promisc = true;
+	}
+
+	/* Write unicast address to mcam entries or del from mcam */
+	if (!promisc && netdev->priv_flags & IFF_UNICAST_FLT)
+		__dev_uc_sync(netdev, otx2_add_macfilter, otx2_del_macfilter);
+
+	mutex_lock(&pf->mbox.lock);
+	req = otx2_mbox_alloc_msg_nix_set_rx_mode(&pf->mbox);
+	if (!req) {
+		mutex_unlock(&pf->mbox.lock);
+		return;
+	}
+
+	req->mode = NIX_RX_MODE_UCAST;
+
+	if (promisc)
+		req->mode |= NIX_RX_MODE_PROMISC;
+	if (netdev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
+		req->mode |= NIX_RX_MODE_ALLMULTI;
+
+	req->mode |= NIX_RX_MODE_USE_MCE;
+
+	otx2_sync_mbox_msg(&pf->mbox);
+	mutex_unlock(&pf->mbox.lock);
+}
+
 int otx2_open(struct net_device *netdev)
 {
 	struct otx2_nic *pf = netdev_priv(netdev);
@@ -1646,6 +1684,8 @@  int otx2_open(struct net_device *netdev)
 	if (err)
 		goto err_tx_stop_queues;
 
+	otx2_do_set_rx_mode(pf);
+
 	return 0;
 
 err_tx_stop_queues:
@@ -1791,43 +1831,11 @@  static void otx2_set_rx_mode(struct net_device *netdev)
 	queue_work(pf->otx2_wq, &pf->rx_mode_work);
 }
 
-static void otx2_do_set_rx_mode(struct work_struct *work)
+static void otx2_rx_mode_wrk_handler(struct work_struct *work)
 {
 	struct otx2_nic *pf = container_of(work, struct otx2_nic, rx_mode_work);
-	struct net_device *netdev = pf->netdev;
-	struct nix_rx_mode *req;
-	bool promisc = false;
-
-	if (!(netdev->flags & IFF_UP))
-		return;
-
-	if ((netdev->flags & IFF_PROMISC) ||
-	    (netdev_uc_count(netdev) > OTX2_MAX_UNICAST_FLOWS)) {
-		promisc = true;
-	}
 
-	/* Write unicast address to mcam entries or del from mcam */
-	if (!promisc && netdev->priv_flags & IFF_UNICAST_FLT)
-		__dev_uc_sync(netdev, otx2_add_macfilter, otx2_del_macfilter);
-
-	mutex_lock(&pf->mbox.lock);
-	req = otx2_mbox_alloc_msg_nix_set_rx_mode(&pf->mbox);
-	if (!req) {
-		mutex_unlock(&pf->mbox.lock);
-		return;
-	}
-
-	req->mode = NIX_RX_MODE_UCAST;
-
-	if (promisc)
-		req->mode |= NIX_RX_MODE_PROMISC;
-	if (netdev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
-		req->mode |= NIX_RX_MODE_ALLMULTI;
-
-	req->mode |= NIX_RX_MODE_USE_MCE;
-
-	otx2_sync_mbox_msg(&pf->mbox);
-	mutex_unlock(&pf->mbox.lock);
+	otx2_do_set_rx_mode(pf);
 }
 
 static int otx2_set_features(struct net_device *netdev,
@@ -2358,7 +2366,7 @@  static int otx2_wq_init(struct otx2_nic *pf)
 	if (!pf->otx2_wq)
 		return -ENOMEM;
 
-	INIT_WORK(&pf->rx_mode_work, otx2_do_set_rx_mode);
+	INIT_WORK(&pf->rx_mode_work, otx2_rx_mode_wrk_handler);
 	INIT_WORK(&pf->reset_task, otx2_reset_task);
 	return 0;
 }