diff mbox series

[net,v2,RESEND] netfilter: fix conntrack flows stuck issue on cleanup.

Message ID 1635931896-27539-1-git-send-email-volodymyr.mytnyk@plvision.eu (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series [net,v2,RESEND] netfilter: fix conntrack flows stuck issue on cleanup. | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net
netdev/fixes_present success Fixes tag present in non-next series
netdev/subject_prefix success Link
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 8 of 8 maintainers
netdev/module_param success Was 0 now: 0
netdev/signed warning No signature found. Please sign patches: https://github.com/mricon/patatt
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success Fixes tag looks correct
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 8 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Volodymyr Mytnyk Nov. 3, 2021, 9:31 a.m. UTC
From: Volodymyr Mytnyk <vmytnyk@marvell.com>

On busy system with big number (few thousands) of HW offloaded flows, it
is possible to hit the situation, where some of the conntack flows are
stuck in conntrack table (as offloaded) and cannot be removed by user.

This behaviour happens if user has configured conntack using tc sub-system,
offloaded those flows for HW and then deleted tc configuration from Linux
system by deleting the tc qdiscs.

When qdiscs are removed, the nf_flow_table_free() is called to do the
cleanup of HW offloaded flows in conntrack table.

...
process_one_work
  tcf_ct_flow_table_cleanup_work()
    nf_flow_table_free()

The nf_flow_table_free() does the following things:

  1. cancels gc workqueue
  2. marks all flows as teardown
  3. executes nf_flow_offload_gc_step() once for each flow to
     trigger correct teardown flow procedure (e.g., allocate
     work to delete the HW flow and marks the flow as "dying").
  4. waits for all scheduled flow offload works to be finished.
  5. executes nf_flow_offload_gc_step() once for each flow to
     trigger the deleting of flows.

Root cause:

In step 3, nf_flow_offload_gc_step() expects to move flow to "dying"
state by using nf_flow_offload_del() and deletes the flow in next
nf_flow_offload_gc_step() iteration. But, if flow is in "pending" state
for some reason (e.g., reading HW stats), it will not be moved to
"dying" state as expected by nf_flow_offload_gc_step() and will not
be marked as "dead" for delition.

In step 5, nf_flow_offload_gc_step() assumes that all flows marked
as "dead" and will be deleted by this call, but this is not true since
the state was not set diring previous nf_flow_offload_gc_step()
call.

It issue causes some of the flows to get stuck in connection tracking
system or not release properly.

To fix this problem, add nf_flow_table_offload_flush() call between 2 & 3
step, to make sure no other flow offload works will be in "pending" state
during step 3.

Fixes: 0f34f30a1be8 ("netfilter: flowtable: Fix missing flush hardware on table free")
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
---
 net/netfilter/nf_flow_table_core.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Pablo Neira Ayuso Nov. 18, 2021, 10 p.m. UTC | #1
Hi,

On Wed, Nov 03, 2021 at 11:31:36AM +0200, Volodymyr Mytnyk wrote:
> From: Volodymyr Mytnyk <vmytnyk@marvell.com>
> 
> On busy system with big number (few thousands) of HW offloaded flows, it
> is possible to hit the situation, where some of the conntack flows are
> stuck in conntrack table (as offloaded) and cannot be removed by user.
> 
> This behaviour happens if user has configured conntack using tc sub-system,
> offloaded those flows for HW and then deleted tc configuration from Linux
> system by deleting the tc qdiscs.
> 
> When qdiscs are removed, the nf_flow_table_free() is called to do the
> cleanup of HW offloaded flows in conntrack table.
> 
> ...
> process_one_work
>   tcf_ct_flow_table_cleanup_work()
>     nf_flow_table_free()
> 
> The nf_flow_table_free() does the following things:
> 
>   1. cancels gc workqueue
>   2. marks all flows as teardown
>   3. executes nf_flow_offload_gc_step() once for each flow to
>      trigger correct teardown flow procedure (e.g., allocate
>      work to delete the HW flow and marks the flow as "dying").
>   4. waits for all scheduled flow offload works to be finished.
>   5. executes nf_flow_offload_gc_step() once for each flow to
>      trigger the deleting of flows.
> 
> Root cause:
> 
> In step 3, nf_flow_offload_gc_step() expects to move flow to "dying"
> state by using nf_flow_offload_del() and deletes the flow in next
> nf_flow_offload_gc_step() iteration. But, if flow is in "pending" state
> for some reason (e.g., reading HW stats), it will not be moved to
> "dying" state as expected by nf_flow_offload_gc_step() and will not
> be marked as "dead" for delition.
> 
> In step 5, nf_flow_offload_gc_step() assumes that all flows marked
> as "dead" and will be deleted by this call, but this is not true since
> the state was not set diring previous nf_flow_offload_gc_step()
> call.
> 
> It issue causes some of the flows to get stuck in connection tracking
> system or not release properly.
> 
> To fix this problem, add nf_flow_table_offload_flush() call between 2 & 3
> step, to make sure no other flow offload works will be in "pending" state
> during step 3.

Thanks for the detailed report.

I'm attaching two patches, the first one is a preparation patch. The
second patch flushes the pending work, then it sets the teardown flag
to all flows in the flowtable and it forces a garbage collector run to
queue work to remove the flows from hardware, then it flushes this new
pending work and (finally) it forces another garbage collector run to
remove the entry from the software flowtable. Compile-tested only.
Volodymyr Mytnyk [C] Nov. 23, 2021, 4:35 p.m. UTC | #2
> Hi,
> 
> On Wed, Nov 03, 2021 at 11:31:36AM +0200, Volodymyr Mytnyk wrote:
> > From: Volodymyr Mytnyk <vmytnyk@marvell.com>
> > 
> > On busy system with big number (few thousands) of HW offloaded flows, it
> > is possible to hit the situation, where some of the conntack flows are
> > stuck in conntrack table (as offloaded) and cannot be removed by user.
> > 
> > This behaviour happens if user has configured conntack using tc sub-system,
> > offloaded those flows for HW and then deleted tc configuration from Linux
> > system by deleting the tc qdiscs.
> > 
> > When qdiscs are removed, the nf_flow_table_free() is called to do the
> > cleanup of HW offloaded flows in conntrack table.
> > 
> > ...
> > process_one_work
> >   tcf_ct_flow_table_cleanup_work()
> >     nf_flow_table_free()
> > 
> > The nf_flow_table_free() does the following things:
> > 
> >   1. cancels gc workqueue
> >   2. marks all flows as teardown
> >   3. executes nf_flow_offload_gc_step() once for each flow to
> >      trigger correct teardown flow procedure (e.g., allocate
> >      work to delete the HW flow and marks the flow as "dying").
> >   4. waits for all scheduled flow offload works to be finished.
> >   5. executes nf_flow_offload_gc_step() once for each flow to
> >      trigger the deleting of flows.
> > 
> > Root cause:
> > 
> > In step 3, nf_flow_offload_gc_step() expects to move flow to "dying"
> > state by using nf_flow_offload_del() and deletes the flow in next
> > nf_flow_offload_gc_step() iteration. But, if flow is in "pending" state
> > for some reason (e.g., reading HW stats), it will not be moved to
> > "dying" state as expected by nf_flow_offload_gc_step() and will not
> > be marked as "dead" for delition.
> > 
> > In step 5, nf_flow_offload_gc_step() assumes that all flows marked
> > as "dead" and will be deleted by this call, but this is not true since
> > the state was not set diring previous nf_flow_offload_gc_step()
> > call.
> > 
> > It issue causes some of the flows to get stuck in connection tracking
> > system or not release properly.
> > 
> > To fix this problem, add nf_flow_table_offload_flush() call between 2 & 3
> > step, to make sure no other flow offload works will be in "pending" state
> > during step 3.
> 
> Thanks for the detailed report.
> 
> I'm attaching two patches, the first one is a preparation patch. The
> second patch flushes the pending work, then it sets the teardown flag
> to all flows in the flowtable and it forces a garbage collector run to
> queue work to remove the flows from hardware, then it flushes this new
> pending work and (finally) it forces another garbage collector run to
> remove the entry from the software flowtable. Compile-tested only.

Hi Pablo,

	Thanks for reviewing the changes and problem investigation.

I will check the provided patches and will back to you.

Regards,
  Volodymyr
diff mbox series

Patch

diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c
index 87a7388b6c89..17593f49413b 100644
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -637,6 +637,8 @@  void nf_flow_table_free(struct nf_flowtable *flow_table)
 
 	cancel_delayed_work_sync(&flow_table->gc_work);
 	nf_flow_table_iterate(flow_table, nf_flow_table_do_cleanup, NULL);
+	/* wait for all 'pending' flows to be finished */
+	nf_flow_table_offload_flush(flow_table);
 	nf_flow_table_iterate(flow_table, nf_flow_offload_gc_step, flow_table);
 	nf_flow_table_offload_flush(flow_table);
 	if (nf_flowtable_hw_offload(flow_table))