| Message ID | 1645347953-27003-7-git-send-email-michael.chan@broadcom.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | b891106da52b2c12dbaf73400f6d225b06a38d80 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | bnxt_en: Bug fixes | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Clearly marked for net |
| netdev/fixes_present | success | Fixes tag present in non-next series |
| netdev/subject_prefix | success | Link |
| netdev/cover_letter | success | Series has a cover letter |
| netdev/patch_count | success | Link |
| netdev/header_inline | success | No static functions without inline keyword in header files |
| netdev/build_32bit | success | Errors and warnings before: 2 this patch: 2 |
| netdev/cc_maintainers | success | CCed 3 of 3 maintainers |
| netdev/build_clang | success | Errors and warnings before: 0 this patch: 0 |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Signed-off-by tag matches author and committer |
| netdev/verify_fixes | success | Fixes tag looks correct |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 2 this patch: 2 |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 34 lines checked |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/source_inline | success | Was 0 now: 0 |
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c index 566c9487ef55..b01d42928a53 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c @@ -644,17 +644,23 @@ static int __hwrm_send(struct bnxt *bp, struct bnxt_hwrm_ctx *ctx) /* Last byte of resp contains valid bit */ valid = ((u8 *)ctx->resp) + len - 1; - for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; j++) { + for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; ) { /* make sure we read from updated DMA memory */ dma_rmb(); if (*valid) break; - usleep_range(1, 5); + if (j < 10) { + udelay(1); + j++; + } else { + usleep_range(20, 30); + j += 20; + } } if (j >= HWRM_VALID_BIT_DELAY_USEC) { hwrm_err(bp, ctx, "Error (timeout: %u) msg {0x%x 0x%x} len:%d v:%d\n", - hwrm_total_timeout(i), req_type, + hwrm_total_timeout(i) + j, req_type, le16_to_cpu(ctx->req->seq_id), len, *valid); goto exit; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h index d52bd2d63aec..c98032e38188 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h @@ -90,7 +90,7 @@ static inline unsigned int hwrm_total_timeout(unsigned int n) } -#define HWRM_VALID_BIT_DELAY_USEC 150 +#define HWRM_VALID_BIT_DELAY_USEC 50000 static inline bool bnxt_cfa_hwrm_message(u16 req_type) {
When polling for the firmware message response, we first poll for the response message header. Once the valid length is detected in the header, we poll for the valid bit at the end of the message which signals DMA completion. Normally, this poll time for DMA completion is extremely short (0 to a few usec). But on some devices under some rare conditions, it can be up to about 20 msec. Increase this delay to 50 msec and use udelay() for the first 10 usec for the common case, and usleep_range() beyond that. Also, change the error message to include the above delay time when printing the timeout value. Fixes: 3c8c20db769c ("bnxt_en: move HWRM API implementation into separate file") Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> --- drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 12 +++++++++--- drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h | 2 +- 2 files changed, 10 insertions(+), 4 deletions(-)