diff mbox series

net: hamradio: use time_is_after_jiffies() instead of open coding it

Message ID 1646018012-61129-1-git-send-email-wangqing@vivo.com (mailing list archive)
State Superseded
Commit 61c4fb9c4d09dfb6f33690169560862d5d0e42f7
Delegated to: Netdev Maintainers
Headers show
Series net: hamradio: use time_is_after_jiffies() instead of open coding it | expand

Checks

Context Check Description
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 5 of 5 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch fail ERROR: trailing statements should be on next line WARNING: line length of 83 exceeds 80 columns
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

王擎 Feb. 28, 2022, 3:13 a.m. UTC 
From: Wang Qing <wangqing@vivo.com>

Use the helper function time_is_{before,after}_jiffies() to improve
code readability.

Signed-off-by: Wang Qing <wangqing@vivo.com>
---
 drivers/net/hamradio/dmascc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Feb. 28, 2022, 1:30 p.m. UTC | #1 
Hello:

This patch was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Sun, 27 Feb 2022 19:13:31 -0800 you wrote:
> From: Wang Qing <wangqing@vivo.com>
> 
> Use the helper function time_is_{before,after}_jiffies() to improve
> code readability.
> 
> Signed-off-by: Wang Qing <wangqing@vivo.com>
> 
> [...]

Here is the summary with links:
  - net: hamradio: use time_is_after_jiffies() instead of open coding it
    https://git.kernel.org/netdev/net-next/c/61c4fb9c4d09

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 7e52749..6e7d17a
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -28,6 +28,7 @@ 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <linux/uaccess.h>
+#include <linux/jiffies.h>
 #include <net/ax25.h>
 #include "z8530.h"
 
@@ -377,7 +378,7 @@  static int __init dmascc_init(void)
 		udelay(2000000 / TMR_0_HZ);
 
 		/* Timing loop */
-		while (jiffies - time < 13) {
+		while (time_is_after_jiffies(time + 13)) {
 			for (i = 0; i < hw[h].num_devs; i++)
 				if (base[i] && counting[i]) {
 					/* Read back Timer 1: latch; read LSB; read MSB */
@@ -525,7 +526,7 @@  static int __init setup_adapter(int card_base, int type, int n)
 
 	/* Wait and detect IRQ */
 	time = jiffies;
-	while (jiffies - time < 2 + HZ / TMR_0_HZ);
+	while (time_is_after_jiffies(time + 2 + HZ / TMR_0_HZ));
 	irq = probe_irq_off(irqs);
 
 	/* Clear pending interrupt, disable interrupts */
@@ -1353,7 +1354,7 @@  static void es_isr(struct scc_priv *priv)
 		/* Switch state */
 		write_scc(priv, R15, 0);
 		if (priv->tx_count &&
-		    (jiffies - priv->tx_start) < priv->param.txtimeout) {
+		    time_is_after_jiffies(priv->tx_start + priv->param.txtimeout) {
 			priv->state = TX_PAUSE;
 			start_timer(priv, priv->param.txpause, 0);
 		} else {