@@ -65,5 +65,6 @@ config SFC_MCDI_LOGGING
a sysfs file 'mcdi_logging' under the PCI device.
source "drivers/net/ethernet/sfc/falcon/Kconfig"
+source "drivers/net/ethernet/sfc/siena/Kconfig"
endif # NET_VENDOR_SOLARFLARE
@@ -13,3 +13,4 @@ sfc-$(CONFIG_SFC_SRIOV) += sriov.o ef10_sriov.o
obj-$(CONFIG_SFC) += sfc.o
obj-$(CONFIG_SFC_FALCON) += falcon/
+obj-$(CONFIG_SFC_SIENA) += siena/
new file mode 100644
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SFC_SIENA
+ tristate "Solarflare SFC9000 support"
+ depends on PCI
+ select MDIO
+ select CRC32
+ help
+ This driver supports 10-gigabit Ethernet cards based on
+ the Solarflare SFC9000 controller.
+
+ To compile this driver as a module, choose M here. The module
+ will be called sfc-siena.
new file mode 100644
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+sfc-siena-y += farch.o siena.o \
+ efx.o efx_common.o efx_channels.o nic.o \
+ tx.o tx_common.o rx.o rx_common.o \
+ selftest.o ethtool.o ethtool_common.o ptp.o \
+ mcdi.o mcdi_port.o mcdi_port_common.o \
+ mcdi_mon.o
+sfc-siena-$(CONFIG_SFC_MTD) += mtd.o
+sfc-siena-$(CONFIG_SFC_SRIOV) += siena_sriov.o
+
+obj-$(CONFIG_SFC_SIENA) += sfc-siena.o
@@ -1265,7 +1265,7 @@ static int __init efx_init_module(void)
{
int rc;
- printk(KERN_INFO "Solarflare NET driver\n");
+ pr_info("Solarflare Siena driver\n");
rc = register_netdevice_notifier(&efx_netdev_notifier);
if (rc)
@@ -1291,7 +1291,7 @@ static int __init efx_init_module(void)
static void __exit efx_exit_module(void)
{
- printk(KERN_INFO "Solarflare NET driver unloading\n");
+ pr_info("Solarflare Siena driver unloading\n");
pci_unregister_driver(&efx_pci_driver);
efx_siena_destroy_reset_workqueue();
@@ -1304,6 +1304,6 @@ module_exit(efx_exit_module);
MODULE_AUTHOR("Solarflare Communications and "
"Michael Brown <mbrown@fensystems.co.uk>");
-MODULE_DESCRIPTION("Solarflare network driver");
+MODULE_DESCRIPTION("Solarflare Siena network driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, efx_pci_table);
Make the (un)load message more specific to differentiate it from the sfc.ko messages. Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com> --- drivers/net/ethernet/sfc/Kconfig | 1 + drivers/net/ethernet/sfc/Makefile | 1 + drivers/net/ethernet/sfc/siena/Kconfig | 12 ++++++++++++ drivers/net/ethernet/sfc/siena/Makefile | 11 +++++++++++ drivers/net/ethernet/sfc/siena/efx.c | 6 +++--- 5 files changed, 28 insertions(+), 3 deletions(-) create mode 100644 drivers/net/ethernet/sfc/siena/Kconfig create mode 100644 drivers/net/ethernet/sfc/siena/Makefile