@@ -344,6 +344,7 @@ config ROCKCHIP_PHY
config SMSC_PHY
tristate "SMSC PHYs"
+ select CRC16
help
Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
@@ -20,6 +20,12 @@
#include <linux/of.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
+#include <linux/crc16.h>
+#include <linux/etherdevice.h>
+#include <linux/inetdevice.h>
+#include <net/addrconf.h>
+#include <net/if_inet6.h>
+#include <net/ipv6.h>
#include <linux/smscphy.h>
/* Vendor-specific PHY Definitions */
@@ -51,6 +57,7 @@ struct smsc_phy_priv {
unsigned int edpd_enable:1;
unsigned int edpd_mode_set_by_user:1;
unsigned int edpd_max_wait_ms;
+ bool wol_arp;
};
static int smsc_phy_ack_interrupt(struct phy_device *phydev)
@@ -258,6 +265,246 @@ int lan87xx_read_status(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(lan87xx_read_status);
+static int lan874x_phy_config_init(struct phy_device *phydev)
+{
+ u16 val;
+ int rc;
+
+ /* Setup LED2/nINT/nPME pin to function as nPME. May need user option
+ * to use LED1/nINT/nPME.
+ */
+ val = MII_LAN874X_PHY_PME2_SET;
+
+ /* The bits MII_LAN874X_PHY_WOL_PFDA_FR, MII_LAN874X_PHY_WOL_WUFR,
+ * MII_LAN874X_PHY_WOL_MPR, and MII_LAN874X_PHY_WOL_BCAST_FR need to
+ * be cleared to de-assert PME signal after a WoL event happens, but
+ * using PME auto clear gets around that.
+ */
+ val |= MII_LAN874X_PHY_PME_SELF_CLEAR;
+ rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR,
+ val);
+ if (rc < 0)
+ return rc;
+
+ /* set nPME self clear delay time */
+ rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_MCFGR,
+ MII_LAN874X_PHY_PME_SELF_CLEAR_DELAY);
+ if (rc < 0)
+ return rc;
+
+ return smsc_phy_config_init(phydev);
+}
+
+static void lan874x_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct smsc_phy_priv *priv = phydev->priv;
+ int rc;
+
+ wol->supported = (WAKE_UCAST | WAKE_BCAST | WAKE_MAGIC |
+ WAKE_ARP | WAKE_MCAST);
+ wol->wolopts = 0;
+
+ rc = phy_read_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR);
+ if (rc < 0)
+ return;
+
+ if (rc & MII_LAN874X_PHY_WOL_PFDAEN)
+ wol->wolopts |= WAKE_UCAST;
+
+ if (rc & MII_LAN874X_PHY_WOL_BCSTEN)
+ wol->wolopts |= WAKE_BCAST;
+
+ if (rc & MII_LAN874X_PHY_WOL_MPEN)
+ wol->wolopts |= WAKE_MAGIC;
+
+ if (rc & MII_LAN874X_PHY_WOL_WUEN) {
+ if (priv->wol_arp)
+ wol->wolopts |= WAKE_ARP;
+ else
+ wol->wolopts |= WAKE_MCAST;
+ }
+}
+
+static u16 smsc_crc16(const u8 *buffer, size_t len)
+{
+ return bitrev16(crc16(0xFFFF, buffer, len));
+}
+
+static int lan874x_chk_wol_pattern(const u8 pattern[], const u16 *mask,
+ u8 len, u8 *data, u8 *datalen)
+{
+ size_t i, j, k;
+ int ret = 0;
+ u16 bits;
+
+ /* Pattern filtering can match up to 128 bytes of frame data. There
+ * are 8 registers to program the 16-bit masks, where each bit means
+ * the byte will be compared. The frame data will then go through a
+ * CRC16 calculation for hardware comparison. This helper function
+ * makes sure only relevant frame data are included in this
+ * calculation. It provides a warning when the masks and expected
+ * data size do not match.
+ */
+ i = 0;
+ k = 0;
+ while (len > 0) {
+ bits = *mask;
+ for (j = 0; j < 16; j++, i++, len--) {
+ /* No more pattern. */
+ if (!len) {
+ /* The rest of bitmap is not empty. */
+ if (bits)
+ ret = i + 1;
+ break;
+ }
+ if (bits & 1)
+ data[k++] = pattern[i];
+ bits >>= 1;
+ }
+ mask++;
+ }
+ *datalen = k;
+ return ret;
+}
+
+static int lan874x_set_wol_pattern(struct phy_device *phydev, u16 val,
+ const u8 data[], u8 datalen,
+ const u16 *mask, u8 masklen)
+{
+ u16 crc, reg;
+ int rc;
+
+ /* Starting pattern offset is set before calling this function. */
+ val |= MII_LAN874X_PHY_WOL_FILTER_EN;
+ rc = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ MII_LAN874X_PHY_MMD_WOL_WUF_CFGA, val);
+ if (rc < 0)
+ return rc;
+
+ crc = smsc_crc16(data, datalen);
+ rc = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ MII_LAN874X_PHY_MMD_WOL_WUF_CFGB, crc);
+ if (rc < 0)
+ return rc;
+
+ masklen = (masklen + 15) & ~0xf;
+ reg = MII_LAN874X_PHY_MMD_WOL_WUF_MASK7;
+ while (masklen >= 16) {
+ rc = phy_write_mmd(phydev, MDIO_MMD_PCS, reg, *mask);
+ if (rc < 0)
+ return rc;
+ reg--;
+ mask++;
+ masklen -= 16;
+ }
+
+ /* Clear out the rest of mask registers. */
+ while (reg != MII_LAN874X_PHY_MMD_WOL_WUF_MASK0) {
+ phy_write_mmd(phydev, MDIO_MMD_PCS, reg, 0);
+ reg--;
+ }
+ return rc;
+}
+
+static int lan874x_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ struct smsc_phy_priv *priv = phydev->priv;
+ u16 val, val_wucsr;
+ u8 data[128];
+ u8 datalen;
+ int rc;
+
+ if (wol->wolopts & WAKE_PHY)
+ return -EOPNOTSUPP;
+
+ /* lan874x has only one WoL filter pattern */
+ if ((wol->wolopts & (WAKE_ARP | WAKE_MCAST)) ==
+ (WAKE_ARP | WAKE_MCAST)) {
+ phydev_info(phydev,
+ "lan874x WoL supports one of ARP|MCAST at a time\n");
+ return -EOPNOTSUPP;
+ }
+
+ rc = phy_read_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR);
+ if (rc < 0)
+ return rc;
+
+ val_wucsr = rc;
+
+ if (wol->wolopts & WAKE_UCAST)
+ val_wucsr |= MII_LAN874X_PHY_WOL_PFDAEN;
+ else
+ val_wucsr &= ~MII_LAN874X_PHY_WOL_PFDAEN;
+
+ if (wol->wolopts & WAKE_BCAST)
+ val_wucsr |= MII_LAN874X_PHY_WOL_BCSTEN;
+ else
+ val_wucsr &= ~MII_LAN874X_PHY_WOL_BCSTEN;
+
+ if (wol->wolopts & WAKE_MAGIC)
+ val_wucsr |= MII_LAN874X_PHY_WOL_MPEN;
+ else
+ val_wucsr &= ~MII_LAN874X_PHY_WOL_MPEN;
+
+ /* Need to use pattern matching */
+ if (wol->wolopts & (WAKE_ARP | WAKE_MCAST))
+ val_wucsr |= MII_LAN874X_PHY_WOL_WUEN;
+ else
+ val_wucsr &= ~MII_LAN874X_PHY_WOL_WUEN;
+
+ if (wol->wolopts & WAKE_ARP) {
+ const u8 pattern[2] = { 0x08, 0x06 };
+ const u16 mask[1] = { 0x0003 };
+
+ rc = lan874x_chk_wol_pattern(pattern, mask, 2, data,
+ &datalen);
+ if (rc)
+ phydev_dbg(phydev, "pattern not valid at %d\n", rc);
+
+ /* Need to match broadcast destination address and provided
+ * data pattern at offset 12.
+ */
+ val = 12 | MII_LAN874X_PHY_WOL_FILTER_BCSTEN;
+ rc = lan874x_set_wol_pattern(phydev, val, data, datalen, mask,
+ 2);
+ if (rc < 0)
+ return rc;
+ priv->wol_arp = true;
+ }
+
+ if (wol->wolopts & WAKE_MCAST) {
+ /* Need to match multicast destination address. */
+ val = MII_LAN874X_PHY_WOL_FILTER_MCASTTEN;
+ rc = lan874x_set_wol_pattern(phydev, val, data, 0, NULL, 0);
+ if (rc < 0)
+ return rc;
+ priv->wol_arp = false;
+ }
+
+ if (wol->wolopts & (WAKE_MAGIC | WAKE_UCAST)) {
+ const u8 *mac = (const u8 *)ndev->dev_addr;
+ int i, reg;
+
+ reg = MII_LAN874X_PHY_MMD_WOL_RX_ADDRC;
+ for (i = 0; i < 6; i += 2, reg--) {
+ rc = phy_write_mmd(phydev, MDIO_MMD_PCS, reg,
+ ((mac[i + 1] << 8) | mac[i]));
+ if (rc < 0)
+ return rc;
+ }
+ }
+
+ rc = phy_write_mmd(phydev, MDIO_MMD_PCS, MII_LAN874X_PHY_MMD_WOL_WUCSR,
+ val_wucsr);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
static int smsc_get_sset_count(struct phy_device *phydev)
{
return ARRAY_SIZE(smsc_hw_stats);
@@ -533,7 +780,7 @@ static struct phy_driver smsc_phy_driver[] = {
/* basic functions */
.read_status = lan87xx_read_status,
- .config_init = smsc_phy_config_init,
+ .config_init = lan874x_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
@@ -548,6 +795,10 @@ static struct phy_driver smsc_phy_driver[] = {
.get_tunable = smsc_phy_get_tunable,
.set_tunable = smsc_phy_set_tunable,
+ /* WoL */
+ .set_wol = lan874x_set_wol,
+ .get_wol = lan874x_get_wol,
+
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
@@ -566,7 +817,7 @@ static struct phy_driver smsc_phy_driver[] = {
/* basic functions */
.read_status = lan87xx_read_status,
- .config_init = smsc_phy_config_init,
+ .config_init = lan874x_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
@@ -581,6 +832,10 @@ static struct phy_driver smsc_phy_driver[] = {
.get_tunable = smsc_phy_get_tunable,
.set_tunable = smsc_phy_set_tunable,
+ /* WoL */
+ .set_wol = lan874x_set_wol,
+ .get_wol = lan874x_get_wol,
+
.suspend = genphy_suspend,
.resume = genphy_resume,
} };
@@ -38,4 +38,38 @@ int smsc_phy_set_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, const void *data);
int smsc_phy_probe(struct phy_device *phydev);
+#define MII_LAN874X_PHY_MMD_WOL_WUCSR 0x8010
+#define MII_LAN874X_PHY_MMD_WOL_WUF_CFGA 0x8011
+#define MII_LAN874X_PHY_MMD_WOL_WUF_CFGB 0x8012
+#define MII_LAN874X_PHY_MMD_WOL_WUF_MASK0 0x8021
+#define MII_LAN874X_PHY_MMD_WOL_WUF_MASK1 0x8022
+#define MII_LAN874X_PHY_MMD_WOL_WUF_MASK2 0x8023
+#define MII_LAN874X_PHY_MMD_WOL_WUF_MASK3 0x8024
+#define MII_LAN874X_PHY_MMD_WOL_WUF_MASK4 0x8025
+#define MII_LAN874X_PHY_MMD_WOL_WUF_MASK5 0x8026
+#define MII_LAN874X_PHY_MMD_WOL_WUF_MASK6 0x8027
+#define MII_LAN874X_PHY_MMD_WOL_WUF_MASK7 0x8028
+#define MII_LAN874X_PHY_MMD_WOL_RX_ADDRA 0x8061
+#define MII_LAN874X_PHY_MMD_WOL_RX_ADDRB 0x8062
+#define MII_LAN874X_PHY_MMD_WOL_RX_ADDRC 0x8063
+#define MII_LAN874X_PHY_MMD_MCFGR 0x8064
+
+#define MII_LAN874X_PHY_PME1_SET (2 << 13)
+#define MII_LAN874X_PHY_PME2_SET (2 << 11)
+#define MII_LAN874X_PHY_PME_SELF_CLEAR BIT(9)
+#define MII_LAN874X_PHY_WOL_PFDA_FR BIT(7)
+#define MII_LAN874X_PHY_WOL_WUFR BIT(6)
+#define MII_LAN874X_PHY_WOL_MPR BIT(5)
+#define MII_LAN874X_PHY_WOL_BCAST_FR BIT(4)
+#define MII_LAN874X_PHY_WOL_PFDAEN BIT(3)
+#define MII_LAN874X_PHY_WOL_WUEN BIT(2)
+#define MII_LAN874X_PHY_WOL_MPEN BIT(1)
+#define MII_LAN874X_PHY_WOL_BCSTEN BIT(0)
+
+#define MII_LAN874X_PHY_WOL_FILTER_EN BIT(15)
+#define MII_LAN874X_PHY_WOL_FILTER_MCASTTEN BIT(9)
+#define MII_LAN874X_PHY_WOL_FILTER_BCSTEN BIT(8)
+
+#define MII_LAN874X_PHY_PME_SELF_CLEAR_DELAY 0x1000 /* 81 milliseconds */
+
#endif /* __LINUX_SMSCPHY_H__ */