diff mbox series

[8/8] staging: wfx: improve robustness of wfx_get_hw_rate()

Message ID 20201009171307.864608-9-Jerome.Pouiller@silabs.com (mailing list archive)
State Not Applicable
Headers show
Series staging: wfx: fix issues reported by Smatch | expand

Commit Message

Jérôme Pouiller Oct. 9, 2020, 5:13 p.m. UTC
From: Jérôme Pouiller <jerome.pouiller@silabs.com>

Smatch complains:

    data_tx.c:37 wfx_get_hw_rate() warn: constraint '(struct ieee80211_supported_band)->bitrates' overflow 'band->bitrates' 0 <= abs_rl '0-127' user_rl '' required = '(struct ieee80211_supported_band)->n_bitrates'
    23          struct ieee80211_supported_band *band;
    24
    25          if (rate->idx < 0)
    26                  return -1;
    27          if (rate->flags & IEEE80211_TX_RC_MCS) {
    28                  if (rate->idx > 7) {
    29                          WARN(1, "wrong rate->idx value: %d", rate->idx);
    30                          return -1;
    31                  }
    32                  return rate->idx + 14;
    33          }
    34          // WFx only support 2GHz, else band information should be retrieved
    35          // from ieee80211_tx_info
    36          band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
    37          return band->bitrates[rate->idx].hw_value;

Add a simple check to make Smatch happy.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
 drivers/staging/wfx/data_tx.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Nathan Chancellor Oct. 16, 2020, 1:50 a.m. UTC | #1
On Fri, Oct 09, 2020 at 07:13:07PM +0200, Jerome Pouiller wrote:
> From: Jérôme Pouiller <jerome.pouiller@silabs.com>
> 
> Smatch complains:
> 
>     data_tx.c:37 wfx_get_hw_rate() warn: constraint '(struct ieee80211_supported_band)->bitrates' overflow 'band->bitrates' 0 <= abs_rl '0-127' user_rl '' required = '(struct ieee80211_supported_band)->n_bitrates'
>     23          struct ieee80211_supported_band *band;
>     24
>     25          if (rate->idx < 0)
>     26                  return -1;
>     27          if (rate->flags & IEEE80211_TX_RC_MCS) {
>     28                  if (rate->idx > 7) {
>     29                          WARN(1, "wrong rate->idx value: %d", rate->idx);
>     30                          return -1;
>     31                  }
>     32                  return rate->idx + 14;
>     33          }
>     34          // WFx only support 2GHz, else band information should be retrieved
>     35          // from ieee80211_tx_info
>     36          band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
>     37          return band->bitrates[rate->idx].hw_value;
> 
> Add a simple check to make Smatch happy.
> 
> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
> ---
>  drivers/staging/wfx/data_tx.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/staging/wfx/data_tx.c b/drivers/staging/wfx/data_tx.c
> index 8db0be08daf8..41f6a604a697 100644
> --- a/drivers/staging/wfx/data_tx.c
> +++ b/drivers/staging/wfx/data_tx.c
> @@ -31,6 +31,10 @@ static int wfx_get_hw_rate(struct wfx_dev *wdev,
>  		}
>  		return rate->idx + 14;
>  	}
> +	if (rate->idx >= band->n_bitrates) {
> +		WARN(1, "wrong rate->idx value: %d", rate->idx);
> +		return -1;
> +	}
>  	// WFx only support 2GHz, else band information should be retrieved
>  	// from ieee80211_tx_info
>  	band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
> -- 
> 2.28.0
> 

This now causes a clang warning:

drivers/staging/wfx/data_tx.c:34:19: warning: variable 'band' is uninitialized when used here [-Wuninitialized]
        if (rate->idx >= band->n_bitrates) {
                         ^~~~
drivers/staging/wfx/data_tx.c:23:39: note: initialize the variable 'band' to silence this warning
        struct ieee80211_supported_band *band;
                                             ^
                                              = NULL
1 warning generated.

Cheers,
Nathan
diff mbox series

Patch

diff --git a/drivers/staging/wfx/data_tx.c b/drivers/staging/wfx/data_tx.c
index 8db0be08daf8..41f6a604a697 100644
--- a/drivers/staging/wfx/data_tx.c
+++ b/drivers/staging/wfx/data_tx.c
@@ -31,6 +31,10 @@  static int wfx_get_hw_rate(struct wfx_dev *wdev,
 		}
 		return rate->idx + 14;
 	}
+	if (rate->idx >= band->n_bitrates) {
+		WARN(1, "wrong rate->idx value: %d", rate->idx);
+		return -1;
+	}
 	// WFx only support 2GHz, else band information should be retrieved
 	// from ieee80211_tx_info
 	band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];