@@ -4,6 +4,6 @@ obj-$(CONFIG_CRYPTO_DEV_OCTEONTX2_CPT) += octeontx2-cpt.o octeontx2-cptvf.o
octeontx2-cpt-objs := otx2_cptpf_main.o otx2_cptpf_mbox.o \
otx2_cpt_mbox_common.o otx2_cptpf_ucode.o otx2_cptlf.o
octeontx2-cptvf-objs := otx2_cptvf_main.o otx2_cptvf_mbox.o otx2_cptlf.o \
- otx2_cpt_mbox_common.o
+ otx2_cpt_mbox_common.o otx2_cptvf_reqmgr.o
ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af
@@ -10,6 +10,22 @@
/* Completion code size and initial value */
#define OTX2_CPT_COMPLETION_CODE_SIZE 8
#define OTX2_CPT_COMPLETION_CODE_INIT OTX2_CPT_COMP_E_NOTDONE
+/*
+ * Maximum total number of SG buffers is 100, we divide it equally
+ * between input and output
+ */
+#define OTX2_CPT_MAX_SG_IN_CNT 50
+#define OTX2_CPT_MAX_SG_OUT_CNT 50
+
+/* DMA mode direct or SG */
+#define OTX2_CPT_DMA_MODE_DIRECT 0
+#define OTX2_CPT_DMA_MODE_SG 1
+
+/* Context source CPTR or DPTR */
+#define OTX2_CPT_FROM_CPTR 0
+#define OTX2_CPT_FROM_DPTR 1
+
+#define OTX2_CPT_MAX_REQ_SIZE 65535
union otx2_cpt_opcode {
u16 flags;
@@ -19,6 +35,13 @@ union otx2_cpt_opcode {
} s;
};
+struct otx2_cptvf_request {
+ u32 param1;
+ u32 param2;
+ u16 dlen;
+ union otx2_cpt_opcode opcode;
+};
+
/*
* CPT_INST_S software command definitions
* Words EI (0-3)
@@ -48,4 +71,126 @@ struct otx2_cpt_iq_command {
union otx2_cpt_iq_cmd_word3 cptr;
};
+struct otx2_cpt_pending_entry {
+ void *completion_addr; /* Completion address */
+ void *info;
+ /* Kernel async request callback */
+ void (*callback)(int status, void *arg1, void *arg2);
+ struct crypto_async_request *areq; /* Async request callback arg */
+ u8 resume_sender; /* Notify sender to resume sending requests */
+ u8 busy; /* Entry status (free/busy) */
+};
+
+struct otx2_cpt_pending_queue {
+ struct otx2_cpt_pending_entry *head; /* Head of the queue */
+ u32 front; /* Process work from here */
+ u32 rear; /* Append new work here */
+ u32 pending_count; /* Pending requests count */
+ u32 qlen; /* Queue length */
+ spinlock_t lock; /* Queue lock */
+};
+
+struct otx2_cpt_buf_ptr {
+ u8 *vptr;
+ dma_addr_t dma_addr;
+ u16 size;
+};
+
+union otx2_cpt_ctrl_info {
+ u32 flags;
+ struct {
+#if defined(__BIG_ENDIAN_BITFIELD)
+ u32 reserved_6_31:26;
+ u32 grp:3; /* Group bits */
+ u32 dma_mode:2; /* DMA mode */
+ u32 se_req:1; /* To SE core */
+#else
+ u32 se_req:1; /* To SE core */
+ u32 dma_mode:2; /* DMA mode */
+ u32 grp:3; /* Group bits */
+ u32 reserved_6_31:26;
+#endif
+ } s;
+};
+
+struct otx2_cpt_req_info {
+ /* Kernel async request callback */
+ void (*callback)(int status, void *arg1, void *arg2);
+ struct crypto_async_request *areq; /* Async request callback arg */
+ struct otx2_cptvf_request req;/* Request information (core specific) */
+ union otx2_cpt_ctrl_info ctrl;/* User control information */
+ struct otx2_cpt_buf_ptr in[OTX2_CPT_MAX_SG_IN_CNT];
+ struct otx2_cpt_buf_ptr out[OTX2_CPT_MAX_SG_OUT_CNT];
+ u8 *iv_out; /* IV to send back */
+ u16 rlen; /* Output length */
+ u8 in_cnt; /* Number of input buffers */
+ u8 out_cnt; /* Number of output buffers */
+ u8 req_type; /* Type of request */
+ u8 is_enc; /* Is a request an encryption request */
+ u8 is_trunc_hmac;/* Is truncated hmac used */
+};
+
+struct otx2_cpt_inst_info {
+ struct otx2_cpt_pending_entry *pentry;
+ struct otx2_cpt_req_info *req;
+ struct pci_dev *pdev;
+ void *completion_addr;
+ u8 *out_buffer;
+ u8 *in_buffer;
+ dma_addr_t dptr_baddr;
+ dma_addr_t rptr_baddr;
+ dma_addr_t comp_baddr;
+ unsigned long time_in;
+ u32 dlen;
+ u32 dma_len;
+ u8 extra_time;
+};
+
+struct otx2_cpt_sglist_component {
+ __be16 len0;
+ __be16 len1;
+ __be16 len2;
+ __be16 len3;
+ __be64 ptr0;
+ __be64 ptr1;
+ __be64 ptr2;
+ __be64 ptr3;
+};
+
+static inline void otx2_cpt_info_destroy(struct pci_dev *pdev,
+ struct otx2_cpt_inst_info *info)
+{
+ struct otx2_cpt_req_info *req;
+ int i;
+
+ if (info->dptr_baddr)
+ dma_unmap_single(&pdev->dev, info->dptr_baddr,
+ info->dma_len, DMA_BIDIRECTIONAL);
+
+ if (info->req) {
+ req = info->req;
+ for (i = 0; i < req->out_cnt; i++) {
+ if (req->out[i].dma_addr)
+ dma_unmap_single(&pdev->dev,
+ req->out[i].dma_addr,
+ req->out[i].size,
+ DMA_BIDIRECTIONAL);
+ }
+
+ for (i = 0; i < req->in_cnt; i++) {
+ if (req->in[i].dma_addr)
+ dma_unmap_single(&pdev->dev,
+ req->in[i].dma_addr,
+ req->in[i].size,
+ DMA_BIDIRECTIONAL);
+ }
+ }
+ kzfree(info);
+}
+
+struct otx2_cptlf_wqe;
+int otx2_cpt_do_request(struct pci_dev *pdev, struct otx2_cpt_req_info *req,
+ int cpu_num);
+void otx2_cpt_post_process(struct otx2_cptlf_wqe *wqe);
+
#endif /* __OTX2_CPT_REQMGR_H */
@@ -80,6 +80,7 @@ struct otx2_cptlf_info {
u8 slot; /* Slot number of this LF */
struct otx2_cpt_inst_queue iqueue;/* Instruction queue */
+ struct otx2_cpt_pending_queue pqueue; /* Pending queue */
struct otx2_cptlf_wqe *wqe; /* Tasklet work info */
};
@@ -91,6 +92,7 @@ struct otx2_cptlfs_info {
struct otx2_mbox *mbox;
u8 are_lfs_attached; /* Whether CPT LFs are attached */
u8 lfs_num; /* Number of CPT LFs */
+ u8 kcrypto_eng_grp_num; /* Kernel crypto engine group number */
atomic_t state; /* LF's state. started/reset */
};
@@ -333,6 +335,11 @@ static inline void otx2_cpt_send_cmd(union otx2_cpt_inst_s *cptinst,
} while (!ret);
}
+static inline bool otx2_cptlf_started(struct otx2_cptlfs_info *lfs)
+{
+ return atomic_read(&lfs->state) == OTX2_CPTLF_STARTED;
+}
+
int otx2_cptlf_init(struct otx2_cptlfs_info *lfs, u8 eng_grp_msk, int pri,
int lfs_num);
void otx2_cptlf_shutdown(struct otx2_cptlfs_info *lfs);
@@ -3,6 +3,7 @@
#include "otx2_cpt_common.h"
#include "otx2_cptvf.h"
+#include "otx2_cptlf.h"
#include <rvu_reg.h>
#define OTX2_CPTVF_DRV_NAME "octeontx2-cptvf"
@@ -94,6 +95,193 @@ static void cptvf_pfvf_mbox_destroy(struct otx2_cptvf_dev *cptvf)
otx2_mbox_destroy(&cptvf->pfvf_mbox);
}
+static void cptlf_work_handler(unsigned long data)
+{
+ otx2_cpt_post_process((struct otx2_cptlf_wqe *) data);
+}
+
+static void cleanup_tasklet_work(struct otx2_cptlfs_info *lfs)
+{
+ int i;
+
+ for (i = 0; i < lfs->lfs_num; i++) {
+ if (!lfs->lf[i].wqe)
+ continue;
+
+ tasklet_kill(&lfs->lf[i].wqe->work);
+ kfree(lfs->lf[i].wqe);
+ lfs->lf[i].wqe = NULL;
+ }
+}
+
+static int init_tasklet_work(struct otx2_cptlfs_info *lfs)
+{
+ struct otx2_cptlf_wqe *wqe;
+ int i, ret = 0;
+
+ for (i = 0; i < lfs->lfs_num; i++) {
+ wqe = kzalloc(sizeof(struct otx2_cptlf_wqe), GFP_KERNEL);
+ if (!wqe) {
+ ret = -ENOMEM;
+ goto cleanup_tasklet;
+ }
+
+ tasklet_init(&wqe->work, cptlf_work_handler, (u64) wqe);
+ wqe->lfs = lfs;
+ wqe->lf_num = i;
+ lfs->lf[i].wqe = wqe;
+ }
+ return 0;
+cleanup_tasklet:
+ cleanup_tasklet_work(lfs);
+ return ret;
+}
+
+static void free_pending_queues(struct otx2_cptlfs_info *lfs)
+{
+ int i;
+
+ for (i = 0; i < lfs->lfs_num; i++) {
+ kfree(lfs->lf[i].pqueue.head);
+ lfs->lf[i].pqueue.head = NULL;
+ }
+}
+
+static int alloc_pending_queues(struct otx2_cptlfs_info *lfs)
+{
+ int size, ret, i;
+
+ if (!lfs->lfs_num)
+ return -EINVAL;
+
+ for (i = 0; i < lfs->lfs_num; i++) {
+ lfs->lf[i].pqueue.qlen = OTX2_CPT_INST_QLEN_MSGS;
+ size = lfs->lf[i].pqueue.qlen *
+ sizeof(struct otx2_cpt_pending_entry);
+
+ lfs->lf[i].pqueue.head = kzalloc(size, GFP_KERNEL);
+ if (!lfs->lf[i].pqueue.head) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ /* Initialize spin lock */
+ spin_lock_init(&lfs->lf[i].pqueue.lock);
+ }
+ return 0;
+error:
+ free_pending_queues(lfs);
+ return ret;
+}
+
+static void lf_sw_cleanup(struct otx2_cptlfs_info *lfs)
+{
+ cleanup_tasklet_work(lfs);
+ free_pending_queues(lfs);
+}
+
+static int lf_sw_init(struct otx2_cptlfs_info *lfs)
+{
+ int ret;
+
+ ret = alloc_pending_queues(lfs);
+ if (ret) {
+ dev_err(&lfs->pdev->dev,
+ "Allocating pending queues failed\n");
+ return ret;
+ }
+ ret = init_tasklet_work(lfs);
+ if (ret) {
+ dev_err(&lfs->pdev->dev,
+ "Tasklet work init failed\n");
+ goto pending_queues_free;
+ }
+ return 0;
+
+pending_queues_free:
+ free_pending_queues(lfs);
+ return ret;
+}
+
+static void cptvf_lf_shutdown(struct otx2_cptlfs_info *lfs)
+{
+ atomic_set(&lfs->state, OTX2_CPTLF_IN_RESET);
+
+ /* Remove interrupts affinity */
+ otx2_cptlf_free_irqs_affinity(lfs);
+ /* Disable instruction queue */
+ otx2_cptlf_disable_iqueues(lfs);
+ /* Unregister LFs interrupts */
+ otx2_cptlf_unregister_interrupts(lfs);
+ /* Cleanup LFs software side */
+ lf_sw_cleanup(lfs);
+ /* Send request to detach LFs */
+ otx2_cpt_detach_rsrcs_msg(lfs);
+}
+
+static int cptvf_lf_init(struct otx2_cptvf_dev *cptvf)
+{
+ struct otx2_cptlfs_info *lfs = &cptvf->lfs;
+ struct device *dev = &cptvf->pdev->dev;
+ int ret, lfs_num;
+ u8 eng_grp_msk;
+
+ /* Get engine group number for symmetric crypto */
+ cptvf->lfs.kcrypto_eng_grp_num = OTX2_CPT_INVALID_CRYPTO_ENG_GRP;
+ ret = otx2_cptvf_send_eng_grp_num_msg(cptvf, OTX2_CPT_SE_TYPES);
+ if (ret)
+ return ret;
+
+ if (cptvf->lfs.kcrypto_eng_grp_num == OTX2_CPT_INVALID_CRYPTO_ENG_GRP) {
+ dev_err(dev, "Engine group for kernel crypto not available\n");
+ ret = -ENOENT;
+ return ret;
+ }
+ eng_grp_msk = 1 << cptvf->lfs.kcrypto_eng_grp_num;
+
+ lfs->reg_base = cptvf->reg_base;
+ lfs->pdev = cptvf->pdev;
+ lfs->mbox = &cptvf->pfvf_mbox;
+
+ lfs_num = num_online_cpus();
+ ret = otx2_cptlf_init(lfs, eng_grp_msk, OTX2_CPT_QUEUE_HI_PRIO,
+ lfs_num);
+ if (ret)
+ return ret;
+
+ /* Get msix offsets for attached LFs */
+ ret = otx2_cpt_msix_offset_msg(lfs);
+ if (ret)
+ goto cleanup_lf;
+
+ /* Initialize LFs software side */
+ ret = lf_sw_init(lfs);
+ if (ret)
+ goto cleanup_lf;
+
+ /* Register LFs interrupts */
+ ret = otx2_cptlf_register_interrupts(lfs);
+ if (ret)
+ goto cleanup_lf_sw;
+
+ /* Set interrupts affinity */
+ ret = otx2_cptlf_set_irqs_affinity(lfs);
+ if (ret)
+ goto unregister_intr;
+
+ atomic_set(&lfs->state, OTX2_CPTLF_STARTED);
+
+ return 0;
+unregister_intr:
+ otx2_cptlf_unregister_interrupts(lfs);
+cleanup_lf_sw:
+ lf_sw_cleanup(lfs);
+cleanup_lf:
+ otx2_cptlf_shutdown(lfs);
+
+ return ret;
+}
+
static int otx2_cptvf_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -156,7 +344,14 @@ static int otx2_cptvf_probe(struct pci_dev *pdev,
if (ret)
goto destroy_pfvf_mbox;
+ /* Initialize CPT LFs */
+ ret = cptvf_lf_init(cptvf);
+ if (ret)
+ goto unregister_interrupts;
+
return 0;
+unregister_interrupts:
+ cptvf_disable_pfvf_mbox_intrs(cptvf);
destroy_pfvf_mbox:
cptvf_pfvf_mbox_destroy(cptvf);
clear_drvdata:
@@ -173,6 +368,7 @@ static void otx2_cptvf_remove(struct pci_dev *pdev)
dev_err(&pdev->dev, "Invalid CPT VF device.\n");
return;
}
+ cptvf_lf_shutdown(&cptvf->lfs);
/* Disable PF-VF mailbox interrupt */
cptvf_disable_pfvf_mbox_intrs(cptvf);
/* Destroy PF-VF mbox */
@@ -28,6 +28,7 @@ static void process_pfvf_mbox_mbox_msg(struct otx2_cptvf_dev *cptvf,
struct mbox_msghdr *msg)
{
struct otx2_cptlfs_info *lfs = &cptvf->lfs;
+ struct otx2_cpt_egrp_num_rsp *rsp_grp;
struct cpt_rd_wr_reg_msg *rsp_reg;
struct msix_offset_rsp *rsp_msix;
int i;
@@ -75,6 +76,10 @@ static void process_pfvf_mbox_mbox_msg(struct otx2_cptvf_dev *cptvf,
if (!rsp_reg->is_write)
*rsp_reg->ret_val = rsp_reg->val;
break;
+ case MBOX_MSG_GET_ENG_GRP_NUM:
+ rsp_grp = (struct otx2_cpt_egrp_num_rsp *) msg;
+ cptvf->lfs.kcrypto_eng_grp_num = rsp_grp->eng_grp_num;
+ break;
default:
dev_err(&cptvf->pdev->dev, "Unsupported msg %d received.\n",
msg->id);
@@ -111,3 +116,24 @@ void otx2_cptvf_pfvf_mbox_handler(struct work_struct *work)
}
otx2_mbox_reset(pfvf_mbox, 0);
}
+
+int otx2_cptvf_send_eng_grp_num_msg(struct otx2_cptvf_dev *cptvf, int eng_type)
+{
+ struct otx2_mbox *mbox = &cptvf->pfvf_mbox;
+ struct pci_dev *pdev = cptvf->pdev;
+ struct otx2_cpt_egrp_num_msg *req;
+
+ req = (struct otx2_cpt_egrp_num_msg *)
+ otx2_mbox_alloc_msg_rsp(mbox, 0, sizeof(*req),
+ sizeof(struct otx2_cpt_egrp_num_rsp));
+ if (req == NULL) {
+ dev_err(&pdev->dev, "RVU MBOX failed to get message.\n");
+ return -EFAULT;
+ }
+ req->hdr.id = MBOX_MSG_GET_ENG_GRP_NUM;
+ req->hdr.sig = OTX2_MBOX_REQ_SIG;
+ req->hdr.pcifunc = OTX2_CPT_RVU_PFFUNC(cptvf->vf_id, 0);
+ req->eng_type = eng_type;
+
+ return otx2_cpt_send_mbox_msg(mbox, pdev);
+}
new file mode 100644
@@ -0,0 +1,532 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2020 Marvell. */
+
+#include "otx2_cptvf.h"
+#include "otx2_cpt_common.h"
+
+/* SG list header size in bytes */
+#define SG_LIST_HDR_SIZE 8
+
+/* Default timeout when waiting for free pending entry in us */
+#define CPT_PENTRY_TIMEOUT 1000
+#define CPT_PENTRY_STEP 50
+
+/* Default threshold for stopping and resuming sender requests */
+#define CPT_IQ_STOP_MARGIN 128
+#define CPT_IQ_RESUME_MARGIN 512
+
+/* Default command timeout in seconds */
+#define CPT_COMMAND_TIMEOUT 4
+#define CPT_TIME_IN_RESET_COUNT 5
+
+static void otx2_cpt_dump_sg_list(struct pci_dev *pdev,
+ struct otx2_cpt_req_info *req)
+{
+ int i;
+
+ pr_debug("Gather list size %d\n", req->in_cnt);
+ for (i = 0; i < req->in_cnt; i++) {
+ pr_debug("Buffer %d size %d, vptr 0x%p, dmaptr 0x%p\n", i,
+ req->in[i].size, req->in[i].vptr,
+ (void *) req->in[i].dma_addr);
+ pr_debug("Buffer hexdump (%d bytes)\n",
+ req->in[i].size);
+ print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1,
+ req->in[i].vptr, req->in[i].size, false);
+ }
+ pr_debug("Scatter list size %d\n", req->out_cnt);
+ for (i = 0; i < req->out_cnt; i++) {
+ pr_debug("Buffer %d size %d, vptr 0x%p, dmaptr 0x%p\n", i,
+ req->out[i].size, req->out[i].vptr,
+ (void *) req->out[i].dma_addr);
+ pr_debug("Buffer hexdump (%d bytes)\n", req->out[i].size);
+ print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1,
+ req->out[i].vptr, req->out[i].size, false);
+ }
+}
+
+static inline struct otx2_cpt_pending_entry *get_free_pending_entry(
+ struct otx2_cpt_pending_queue *q,
+ int qlen)
+{
+ struct otx2_cpt_pending_entry *ent = NULL;
+
+ ent = &q->head[q->rear];
+ if (unlikely(ent->busy))
+ return NULL;
+
+ q->rear++;
+ if (unlikely(q->rear == qlen))
+ q->rear = 0;
+
+ return ent;
+}
+
+static inline u32 modulo_inc(u32 index, u32 length, u32 inc)
+{
+ if (WARN_ON(inc > length))
+ inc = length;
+
+ index += inc;
+ if (unlikely(index >= length))
+ index -= length;
+
+ return index;
+}
+
+static inline void free_pentry(struct otx2_cpt_pending_entry *pentry)
+{
+ pentry->completion_addr = NULL;
+ pentry->info = NULL;
+ pentry->callback = NULL;
+ pentry->areq = NULL;
+ pentry->resume_sender = false;
+ pentry->busy = false;
+}
+
+static inline int setup_sgio_components(struct pci_dev *pdev,
+ struct otx2_cpt_buf_ptr *list,
+ int buf_count, u8 *buffer)
+{
+ struct otx2_cpt_sglist_component *sg_ptr = NULL;
+ int ret = 0, i, j;
+ int components;
+
+ if (unlikely(!list)) {
+ dev_err(&pdev->dev, "Input list pointer is NULL\n");
+ return -EFAULT;
+ }
+
+ for (i = 0; i < buf_count; i++) {
+ if (unlikely(!list[i].vptr))
+ continue;
+ list[i].dma_addr = dma_map_single(&pdev->dev, list[i].vptr,
+ list[i].size,
+ DMA_BIDIRECTIONAL);
+ if (unlikely(dma_mapping_error(&pdev->dev, list[i].dma_addr))) {
+ dev_err(&pdev->dev, "Dma mapping failed\n");
+ ret = -EIO;
+ goto sg_cleanup;
+ }
+ }
+ components = buf_count / 4;
+ sg_ptr = (struct otx2_cpt_sglist_component *)buffer;
+ for (i = 0; i < components; i++) {
+ sg_ptr->len0 = cpu_to_be16(list[i * 4 + 0].size);
+ sg_ptr->len1 = cpu_to_be16(list[i * 4 + 1].size);
+ sg_ptr->len2 = cpu_to_be16(list[i * 4 + 2].size);
+ sg_ptr->len3 = cpu_to_be16(list[i * 4 + 3].size);
+ sg_ptr->ptr0 = cpu_to_be64(list[i * 4 + 0].dma_addr);
+ sg_ptr->ptr1 = cpu_to_be64(list[i * 4 + 1].dma_addr);
+ sg_ptr->ptr2 = cpu_to_be64(list[i * 4 + 2].dma_addr);
+ sg_ptr->ptr3 = cpu_to_be64(list[i * 4 + 3].dma_addr);
+ sg_ptr++;
+ }
+ components = buf_count % 4;
+
+ switch (components) {
+ case 3:
+ sg_ptr->len2 = cpu_to_be16(list[i * 4 + 2].size);
+ sg_ptr->ptr2 = cpu_to_be64(list[i * 4 + 2].dma_addr);
+ fallthrough;
+ case 2:
+ sg_ptr->len1 = cpu_to_be16(list[i * 4 + 1].size);
+ sg_ptr->ptr1 = cpu_to_be64(list[i * 4 + 1].dma_addr);
+ fallthrough;
+ case 1:
+ sg_ptr->len0 = cpu_to_be16(list[i * 4 + 0].size);
+ sg_ptr->ptr0 = cpu_to_be64(list[i * 4 + 0].dma_addr);
+ break;
+ default:
+ break;
+ }
+ return ret;
+
+sg_cleanup:
+ for (j = 0; j < i; j++) {
+ if (list[j].dma_addr) {
+ dma_unmap_single(&pdev->dev, list[j].dma_addr,
+ list[j].size, DMA_BIDIRECTIONAL);
+ }
+
+ list[j].dma_addr = 0;
+ }
+ return ret;
+}
+
+static inline struct otx2_cpt_inst_info *info_create(struct pci_dev *pdev,
+ struct otx2_cpt_req_info *req,
+ gfp_t gfp)
+{
+ int align = OTX2_CPT_DMA_MINALIGN;
+ struct otx2_cpt_inst_info *info;
+ u32 dlen, align_dlen, info_len;
+ u16 g_sz_bytes, s_sz_bytes;
+ u32 total_mem_len;
+
+ if (unlikely(req->in_cnt > OTX2_CPT_MAX_SG_IN_CNT ||
+ req->out_cnt > OTX2_CPT_MAX_SG_OUT_CNT)) {
+ dev_err(&pdev->dev, "Error too many sg components\n");
+ return NULL;
+ }
+
+ g_sz_bytes = ((req->in_cnt + 3) / 4) *
+ sizeof(struct otx2_cpt_sglist_component);
+ s_sz_bytes = ((req->out_cnt + 3) / 4) *
+ sizeof(struct otx2_cpt_sglist_component);
+
+ dlen = g_sz_bytes + s_sz_bytes + SG_LIST_HDR_SIZE;
+ align_dlen = ALIGN(dlen, align);
+ info_len = ALIGN(sizeof(*info), align);
+ total_mem_len = align_dlen + info_len + sizeof(union otx2_cpt_res_s);
+
+ info = kzalloc(total_mem_len, gfp);
+ if (unlikely(!info))
+ return NULL;
+
+ info->dlen = dlen;
+ info->in_buffer = (u8 *)info + info_len;
+
+ ((u16 *)info->in_buffer)[0] = req->out_cnt;
+ ((u16 *)info->in_buffer)[1] = req->in_cnt;
+ ((u16 *)info->in_buffer)[2] = 0;
+ ((u16 *)info->in_buffer)[3] = 0;
+ cpu_to_be64s((u64 *)info->in_buffer);
+
+ /* Setup gather (input) components */
+ if (setup_sgio_components(pdev, req->in, req->in_cnt,
+ &info->in_buffer[8])) {
+ dev_err(&pdev->dev, "Failed to setup gather list\n");
+ goto destroy_info;
+ }
+
+ if (setup_sgio_components(pdev, req->out, req->out_cnt,
+ &info->in_buffer[8 + g_sz_bytes])) {
+ dev_err(&pdev->dev, "Failed to setup scatter list\n");
+ goto destroy_info;
+ }
+
+ info->dma_len = total_mem_len - info_len;
+ info->dptr_baddr = dma_map_single(&pdev->dev, info->in_buffer,
+ info->dma_len, DMA_BIDIRECTIONAL);
+ if (unlikely(dma_mapping_error(&pdev->dev, info->dptr_baddr))) {
+ dev_err(&pdev->dev, "DMA Mapping failed for cpt req\n");
+ goto destroy_info;
+ }
+ /*
+ * Get buffer for union otx2_cpt_res_s response
+ * structure and its physical address
+ */
+ info->completion_addr = info->in_buffer + align_dlen;
+ info->comp_baddr = info->dptr_baddr + align_dlen;
+
+ return info;
+destroy_info:
+ otx2_cpt_info_destroy(pdev, info);
+ return NULL;
+}
+
+static int process_request(struct pci_dev *pdev, struct otx2_cpt_req_info *req,
+ struct otx2_cpt_pending_queue *pqueue,
+ struct otx2_cptlf_info *lf)
+{
+ struct otx2_cptvf_request *cpt_req = &req->req;
+ struct otx2_cpt_pending_entry *pentry = NULL;
+ union otx2_cpt_ctrl_info *ctrl = &req->ctrl;
+ struct otx2_cpt_inst_info *info = NULL;
+ union otx2_cpt_res_s *result = NULL;
+ struct otx2_cpt_iq_command iq_cmd;
+ union otx2_cpt_inst_s cptinst;
+ int retry, ret = 0;
+ u8 resume_sender;
+ gfp_t gfp;
+
+ gfp = (req->areq->flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? GFP_KERNEL :
+ GFP_ATOMIC;
+ if (unlikely(!otx2_cptlf_started(lf->lfs)))
+ return -ENODEV;
+
+ info = info_create(pdev, req, gfp);
+ if (unlikely(!info)) {
+ dev_err(&pdev->dev, "Setting up cpt inst info failed");
+ return -ENOMEM;
+ }
+ cpt_req->dlen = info->dlen;
+
+ result = info->completion_addr;
+ result->s.compcode = OTX2_CPT_COMPLETION_CODE_INIT;
+
+ spin_lock_bh(&pqueue->lock);
+ pentry = get_free_pending_entry(pqueue, pqueue->qlen);
+ retry = CPT_PENTRY_TIMEOUT / CPT_PENTRY_STEP;
+ while (unlikely(!pentry) && retry--) {
+ spin_unlock_bh(&pqueue->lock);
+ udelay(CPT_PENTRY_STEP);
+ spin_lock_bh(&pqueue->lock);
+ pentry = get_free_pending_entry(pqueue, pqueue->qlen);
+ }
+
+ if (unlikely(!pentry)) {
+ ret = -ENOSPC;
+ goto destroy_info;
+ }
+
+ /*
+ * Check if we are close to filling in entire pending queue,
+ * if so then tell the sender to stop/sleep by returning -EBUSY
+ * We do it only for context which can sleep (GFP_KERNEL)
+ */
+ if (gfp == GFP_KERNEL &&
+ pqueue->pending_count > (pqueue->qlen - CPT_IQ_STOP_MARGIN)) {
+ pentry->resume_sender = true;
+ } else
+ pentry->resume_sender = false;
+ resume_sender = pentry->resume_sender;
+ pqueue->pending_count++;
+
+ pentry->completion_addr = info->completion_addr;
+ pentry->info = info;
+ pentry->callback = req->callback;
+ pentry->areq = req->areq;
+ pentry->busy = true;
+ info->pentry = pentry;
+ info->time_in = jiffies;
+ info->req = req;
+
+ /* Fill in the command */
+ iq_cmd.cmd.u = 0;
+ iq_cmd.cmd.s.opcode = cpu_to_be16(cpt_req->opcode.flags);
+ iq_cmd.cmd.s.param1 = cpu_to_be16(cpt_req->param1);
+ iq_cmd.cmd.s.param2 = cpu_to_be16(cpt_req->param2);
+ iq_cmd.cmd.s.dlen = cpu_to_be16(cpt_req->dlen);
+
+ /* 64-bit swap for microcode data reads, not needed for addresses*/
+ cpu_to_be64s(&iq_cmd.cmd.u);
+ iq_cmd.dptr = info->dptr_baddr;
+ iq_cmd.rptr = 0;
+ iq_cmd.cptr.u = 0;
+ iq_cmd.cptr.s.grp = ctrl->s.grp;
+
+ /* Fill in the CPT_INST_S type command for HW interpretation */
+ otx2_cpt_fill_inst(&cptinst, &iq_cmd, info->comp_baddr);
+
+ /* Print debug info if enabled */
+ otx2_cpt_dump_sg_list(pdev, req);
+ pr_debug("Cpt_inst_s hexdump (%d bytes)\n", OTX2_CPT_INST_SIZE);
+ print_hex_dump_debug("", 0, 16, 1, &cptinst, OTX2_CPT_INST_SIZE, false);
+ pr_debug("Dptr hexdump (%d bytes)\n", cpt_req->dlen);
+ print_hex_dump_debug("", 0, 16, 1, info->in_buffer,
+ cpt_req->dlen, false);
+
+ /* Send CPT command */
+ otx2_cpt_send_cmd(&cptinst, 1, lf);
+
+ /*
+ * We allocate and prepare pending queue entry in critical section
+ * together with submitting CPT instruction to CPT instruction queue
+ * to make sure that order of CPT requests is the same in both
+ * pending and instruction queues
+ */
+ spin_unlock_bh(&pqueue->lock);
+
+ ret = resume_sender ? -EBUSY : -EINPROGRESS;
+ return ret;
+destroy_info:
+ spin_unlock_bh(&pqueue->lock);
+ otx2_cpt_info_destroy(pdev, info);
+ return ret;
+}
+
+int otx2_cpt_do_request(struct pci_dev *pdev, struct otx2_cpt_req_info *req,
+ int cpu_num)
+{
+ struct otx2_cptvf_dev *cptvf = pci_get_drvdata(pdev);
+ struct otx2_cptlfs_info *lfs = &cptvf->lfs;
+
+ return process_request(lfs->pdev, req, &lfs->lf[cpu_num].pqueue,
+ &lfs->lf[cpu_num]);
+}
+
+static int cpt_process_ccode(struct pci_dev *pdev,
+ union otx2_cpt_res_s *cpt_status,
+ struct otx2_cpt_inst_info *info,
+ u32 *res_code)
+{
+ u8 uc_ccode = cpt_status->s.uc_compcode;
+ u8 ccode = cpt_status->s.compcode;
+
+ switch (ccode) {
+ case OTX2_CPT_COMP_E_FAULT:
+ dev_err(&pdev->dev,
+ "Request failed with DMA fault\n");
+ otx2_cpt_dump_sg_list(pdev, info->req);
+ break;
+
+ case OTX2_CPT_COMP_E_HWERR:
+ dev_err(&pdev->dev,
+ "Request failed with hardware error\n");
+ otx2_cpt_dump_sg_list(pdev, info->req);
+ break;
+
+ case OTX2_CPT_COMP_E_INSTERR:
+ dev_err(&pdev->dev,
+ "Request failed with instruction error\n");
+ otx2_cpt_dump_sg_list(pdev, info->req);
+ break;
+
+ case OTX2_CPT_COMP_E_NOTDONE:
+ /* check for timeout */
+ if (time_after_eq(jiffies, info->time_in +
+ CPT_COMMAND_TIMEOUT * HZ))
+ dev_warn(&pdev->dev,
+ "Request timed out 0x%p", info->req);
+ else if (info->extra_time < CPT_TIME_IN_RESET_COUNT) {
+ info->time_in = jiffies;
+ info->extra_time++;
+ }
+ return 1;
+
+ case OTX2_CPT_COMP_E_GOOD:
+ /*
+ * Check microcode completion code, it is only valid
+ * when completion code is CPT_COMP_E::GOOD
+ */
+ if (uc_ccode != OTX2_CPT_UCC_SUCCESS) {
+ /*
+ * If requested hmac is truncated and ucode returns
+ * s/g write length error then we report success
+ * because ucode writes as many bytes of calculated
+ * hmac as available in gather buffer and reports
+ * s/g write length error if number of bytes in gather
+ * buffer is less than full hmac size.
+ */
+ if (info->req->is_trunc_hmac &&
+ uc_ccode == OTX2_CPT_UCC_SG_WRITE_LENGTH) {
+ *res_code = 0;
+ break;
+ }
+
+ dev_err(&pdev->dev,
+ "Request failed with software error code 0x%x\n",
+ cpt_status->s.uc_compcode);
+ otx2_cpt_dump_sg_list(pdev, info->req);
+ break;
+ }
+ /* Request has been processed with success */
+ *res_code = 0;
+ break;
+
+ default:
+ dev_err(&pdev->dev,
+ "Request returned invalid status %d\n", ccode);
+ break;
+ }
+ return 0;
+}
+
+static inline void process_pending_queue(struct pci_dev *pdev,
+ struct otx2_cpt_pending_queue *pqueue)
+{
+ struct otx2_cpt_pending_entry *resume_pentry = NULL;
+ void (*callback)(int status, void *arg, void *req);
+ struct otx2_cpt_pending_entry *pentry = NULL;
+ union otx2_cpt_res_s *cpt_status = NULL;
+ struct otx2_cpt_inst_info *info = NULL;
+ struct otx2_cpt_req_info *req = NULL;
+ struct crypto_async_request *areq;
+ u32 res_code, resume_index;
+
+ while (1) {
+ spin_lock_bh(&pqueue->lock);
+ pentry = &pqueue->head[pqueue->front];
+
+ if (WARN_ON(!pentry)) {
+ spin_unlock_bh(&pqueue->lock);
+ break;
+ }
+
+ res_code = -EINVAL;
+ if (unlikely(!pentry->busy)) {
+ spin_unlock_bh(&pqueue->lock);
+ break;
+ }
+
+ if (unlikely(!pentry->callback)) {
+ dev_err(&pdev->dev, "Callback NULL\n");
+ goto process_pentry;
+ }
+
+ info = pentry->info;
+ if (unlikely(!info)) {
+ dev_err(&pdev->dev, "Pending entry post arg NULL\n");
+ goto process_pentry;
+ }
+
+ req = info->req;
+ if (unlikely(!req)) {
+ dev_err(&pdev->dev, "Request NULL\n");
+ goto process_pentry;
+ }
+
+ cpt_status = pentry->completion_addr;
+ if (unlikely(!cpt_status)) {
+ dev_err(&pdev->dev, "Completion address NULL\n");
+ goto process_pentry;
+ }
+
+ if (cpt_process_ccode(pdev, cpt_status, info, &res_code)) {
+ spin_unlock_bh(&pqueue->lock);
+ return;
+ }
+ info->pdev = pdev;
+
+process_pentry:
+ /*
+ * Check if we should inform sending side to resume
+ * We do it CPT_IQ_RESUME_MARGIN elements in advance before
+ * pending queue becomes empty
+ */
+ resume_index = modulo_inc(pqueue->front, pqueue->qlen,
+ CPT_IQ_RESUME_MARGIN);
+ resume_pentry = &pqueue->head[resume_index];
+ if (resume_pentry &&
+ resume_pentry->resume_sender) {
+ resume_pentry->resume_sender = false;
+ callback = resume_pentry->callback;
+ areq = resume_pentry->areq;
+
+ if (callback) {
+ spin_unlock_bh(&pqueue->lock);
+
+ /*
+ * EINPROGRESS is an indication for sending
+ * side that it can resume sending requests
+ */
+ callback(-EINPROGRESS, areq, info);
+ spin_lock_bh(&pqueue->lock);
+ }
+ }
+
+ callback = pentry->callback;
+ areq = pentry->areq;
+ free_pentry(pentry);
+
+ pqueue->pending_count--;
+ pqueue->front = modulo_inc(pqueue->front, pqueue->qlen, 1);
+ spin_unlock_bh(&pqueue->lock);
+
+ /*
+ * Call callback after current pending entry has been
+ * processed, we don't do it if the callback pointer is
+ * invalid.
+ */
+ if (callback)
+ callback(res_code, areq, info);
+ }
+}
+
+void otx2_cpt_post_process(struct otx2_cptlf_wqe *wqe)
+{
+ process_pending_queue(wqe->lfs->pdev,
+ &wqe->lfs->lf[wqe->lf_num].pqueue);
+}