diff mbox series

[net-next] drivers/net/wan/hdlc_fr: Improve fr_rx and add support for any Ethertype

Message ID 20201017051951.363514-1-xie.he.0141@gmail.com (mailing list archive)
State Not Applicable
Delegated to: Netdev Maintainers
Headers show
Series [net-next] drivers/net/wan/hdlc_fr: Improve fr_rx and add support for any Ethertype | expand

Commit Message

Xie He Oct. 17, 2020, 5:19 a.m. UTC
1. Change the fr_rx function to make this driver support any Ethertype
when receiving. (This driver is already able to handle any Ethertype
when sending.)

Originally in the fr_rx function, the code that parses the long (10-byte)
header only recognizes a few Ethertype values and drops frames with other
Ethertype values. This patch replaces this code to make fr_rx support
any Ethertype. This patch also creates a new function fr_snap_parse as
part of the new code.

2. Change the use of the "dev" variable in fr_rx. Originally we do
"dev = something", and then at the end do "if (dev) skb->dev = dev".
Now we do "if (something) skb->dev = something", then at the end do
"dev = skb->dev".

This is to make the logic of our code consistent with eth_type_trans
(which we call). The eth_type_trans function expects a non-NULL pointer
as a parameter and assigns it directly to skb->dev.

3. Change the initial skb->len check in fr_fx from "<= 4" to "< 4".
At first we only need to ensure a 4-byte header is present. We indeed
normally need the 5th byte, too, but it'd be more logical to check its
existence when we actually need it.

Also add an fh->ea2 check to the initial checks in fr_fx. fh->ea2 == 1
means the second address byte is the final address byte. We only support
the case where the address length is 2 bytes.

4. Use "goto rx_drop" whenever we need to drop a valid frame.

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
---
 drivers/net/wan/hdlc_fr.c | 119 +++++++++++++++++++++++---------------
 1 file changed, 73 insertions(+), 46 deletions(-)

Comments

Jakub Kicinski Oct. 18, 2020, 10:05 p.m. UTC | #1
On Fri, 16 Oct 2020 22:19:51 -0700 Xie He wrote:
> 1. Change the fr_rx function to make this driver support any Ethertype
> when receiving. (This driver is already able to handle any Ethertype
> when sending.)
> 
> Originally in the fr_rx function, the code that parses the long (10-byte)
> header only recognizes a few Ethertype values and drops frames with other
> Ethertype values. This patch replaces this code to make fr_rx support
> any Ethertype. This patch also creates a new function fr_snap_parse as
> part of the new code.
> 
> 2. Change the use of the "dev" variable in fr_rx. Originally we do
> "dev = something", and then at the end do "if (dev) skb->dev = dev".
> Now we do "if (something) skb->dev = something", then at the end do
> "dev = skb->dev".
> 
> This is to make the logic of our code consistent with eth_type_trans
> (which we call). The eth_type_trans function expects a non-NULL pointer
> as a parameter and assigns it directly to skb->dev.
> 
> 3. Change the initial skb->len check in fr_fx from "<= 4" to "< 4".
> At first we only need to ensure a 4-byte header is present. We indeed
> normally need the 5th byte, too, but it'd be more logical to check its
> existence when we actually need it.
> 
> Also add an fh->ea2 check to the initial checks in fr_fx. fh->ea2 == 1
> means the second address byte is the final address byte. We only support
> the case where the address length is 2 bytes.
> 
> 4. Use "goto rx_drop" whenever we need to drop a valid frame.

Whenever you make a list like that it's a strong indication that 
each of these should be a separate commit. That makes things easier 
to review.


We have already sent a pull request for 5.10 and therefore net-next 
is closed for new drivers, features, and code refactoring.

Please repost when net-next reopens after 5.10-rc1 is cut.

(http://vger.kernel.org/~davem/net-next.html will not be up to date 
 this time around, sorry about that).

RFC patches sent for review only are obviously welcome at any time.
Xie He Oct. 18, 2020, 11:50 p.m. UTC | #2
On Sun, Oct 18, 2020 at 3:05 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> Whenever you make a list like that it's a strong indication that
> each of these should be a separate commit. That makes things easier
> to review.
>
>
> We have already sent a pull request for 5.10 and therefore net-next
> is closed for new drivers, features, and code refactoring.
>
> Please repost when net-next reopens after 5.10-rc1 is cut.
>
> (http://vger.kernel.org/~davem/net-next.html will not be up to date
>  this time around, sorry about that).
>
> RFC patches sent for review only are obviously welcome at any time.

OK. Thanks!

I'll divide this into smaller commits and repost after rc1.
diff mbox series

Patch

diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 409e5a7ad8e2..e95efc14bc97 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -871,6 +871,45 @@  static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
 	return 0;
 }
 
+static int fr_snap_parse(struct sk_buff *skb, struct pvc_device *pvc)
+{
+	/* OUI 00-00-00 indicates an Ethertype follows */
+	if (skb->data[0] == 0x00 &&
+	    skb->data[1] == 0x00 &&
+	    skb->data[2] == 0x00) {
+		if (!pvc->main)
+			return -1;
+		skb->dev = pvc->main;
+		skb->protocol = *(__be16 *)(skb->data + 3); /* Ethertype */
+		skb_pull(skb, 5);
+		skb_reset_mac_header(skb);
+		return 0;
+
+	/* OUI 00-80-C2 stands for the 802.1 organization */
+	} else if (skb->data[0] == 0x00 &&
+		   skb->data[1] == 0x80 &&
+		   skb->data[2] == 0xC2) {
+		/* PID 00-07 stands for Ethernet frames without FCS */
+		if (skb->data[3] == 0x00 &&
+		    skb->data[4] == 0x07) {
+			if (!pvc->ether)
+				return -1;
+			skb_pull(skb, 5);
+			if (skb->len < ETH_HLEN)
+				return -1;
+			skb->protocol = eth_type_trans(skb, pvc->ether);
+			return 0;
+
+		/* PID unsupported */
+		} else {
+			return -1;
+		}
+
+	/* OUI unsupported */
+	} else {
+		return -1;
+	}
+}
 
 static int fr_rx(struct sk_buff *skb)
 {
@@ -880,9 +919,9 @@  static int fr_rx(struct sk_buff *skb)
 	u8 *data = skb->data;
 	u16 dlci;
 	struct pvc_device *pvc;
-	struct net_device *dev = NULL;
+	struct net_device *dev;
 
-	if (skb->len <= 4 || fh->ea1 || data[2] != FR_UI)
+	if (skb->len < 4 || fh->ea1 || !fh->ea2 || data[2] != FR_UI)
 		goto rx_error;
 
 	dlci = q922_to_dlci(skb->data);
@@ -904,8 +943,7 @@  static int fr_rx(struct sk_buff *skb)
 		netdev_info(frad, "No PVC for received frame's DLCI %d\n",
 			    dlci);
 #endif
-		dev_kfree_skb_any(skb);
-		return NET_RX_DROP;
+		goto rx_drop;
 	}
 
 	if (pvc->state.fecn != fh->fecn) {
@@ -931,63 +969,52 @@  static int fr_rx(struct sk_buff *skb)
 	}
 
 	if (data[3] == NLPID_IP) {
+		if (!pvc->main)
+			goto rx_drop;
 		skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */
-		dev = pvc->main;
+		skb->dev = pvc->main;
 		skb->protocol = htons(ETH_P_IP);
+		skb_reset_mac_header(skb);
 
 	} else if (data[3] == NLPID_IPV6) {
+		if (!pvc->main)
+			goto rx_drop;
 		skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */
-		dev = pvc->main;
+		skb->dev = pvc->main;
 		skb->protocol = htons(ETH_P_IPV6);
+		skb_reset_mac_header(skb);
 
-	} else if (skb->len > 10 && data[3] == FR_PAD &&
-		   data[4] == NLPID_SNAP && data[5] == FR_PAD) {
-		u16 oui = ntohs(*(__be16*)(data + 6));
-		u16 pid = ntohs(*(__be16*)(data + 8));
-		skb_pull(skb, 10);
-
-		switch ((((u32)oui) << 16) | pid) {
-		case ETH_P_ARP: /* routed frame with SNAP */
-		case ETH_P_IPX:
-		case ETH_P_IP:	/* a long variant */
-		case ETH_P_IPV6:
-			dev = pvc->main;
-			skb->protocol = htons(pid);
-			break;
-
-		case 0x80C20007: /* bridged Ethernet frame */
-			if ((dev = pvc->ether) != NULL)
-				skb->protocol = eth_type_trans(skb, dev);
-			break;
-
-		default:
-			netdev_info(frad, "Unsupported protocol, OUI=%x PID=%x\n",
-				    oui, pid);
-			dev_kfree_skb_any(skb);
-			return NET_RX_DROP;
+	} else if (data[3] == FR_PAD) {
+		if (skb->len < 5)
+			goto rx_error;
+		if (data[4] == NLPID_SNAP) { /* A SNAP header follows */
+			skb_pull(skb, 5);
+			if (skb->len < 5) /* Incomplete SNAP header */
+				goto rx_error;
+			if (fr_snap_parse(skb, pvc))
+				goto rx_drop;
+		} else {
+			goto rx_drop;
 		}
+
 	} else {
 		netdev_info(frad, "Unsupported protocol, NLPID=%x length=%i\n",
 			    data[3], skb->len);
-		dev_kfree_skb_any(skb);
-		return NET_RX_DROP;
+		goto rx_drop;
 	}
 
-	if (dev) {
-		dev->stats.rx_packets++; /* PVC traffic */
-		dev->stats.rx_bytes += skb->len;
-		if (pvc->state.becn)
-			dev->stats.rx_compressed++;
-		skb->dev = dev;
-		netif_rx(skb);
-		return NET_RX_SUCCESS;
-	} else {
-		dev_kfree_skb_any(skb);
-		return NET_RX_DROP;
-	}
+	dev = skb->dev;
+	dev->stats.rx_packets++; /* PVC traffic */
+	dev->stats.rx_bytes += skb->len;
+	if (pvc->state.becn)
+		dev->stats.rx_compressed++;
+	netif_rx(skb);
+	return NET_RX_SUCCESS;
 
- rx_error:
+rx_error:
 	frad->stats.rx_errors++; /* Mark error */
+rx_drop:
+	frad->stats.rx_dropped++;
 	dev_kfree_skb_any(skb);
 	return NET_RX_DROP;
 }