diff mbox series

[v3] dt-bindings: misc: convert fsl,qoriq-mc from txt to YAML

Message ID 20201112133254.7291-1-laurentiu.tudor@nxp.com (mailing list archive)
State Not Applicable
Delegated to: Netdev Maintainers
Headers show
Series [v3] dt-bindings: misc: convert fsl,qoriq-mc from txt to YAML | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 1 this patch: 1
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Laurentiu Tudor Nov. 12, 2020, 1:32 p.m. UTC
From: Ionut-robert Aron <ionut-robert.aron@nxp.com>

Convert fsl,qoriq-mc to YAML in order to automate the verification
process of dts files. In addition, update MAINTAINERS accordingly
and, while at it, add some missing files.

Signed-off-by: Ionut-robert Aron <ionut-robert.aron@nxp.com>
[laurentiu.tudor@nxp.com: update MINTAINERS, updates & fixes in schema]
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
Changes in v3:
 - dropped duplicated "fsl,qoriq-mc-dpmac" schema and replaced with
   reference to it
 - fixed a dt_binding_check warning
Changes in v2:
 - fixed errors reported by yamllint
 - dropped multiple unnecessary quotes
 - used schema instead of text in description
 - added constraints on dpmac reg property

 .../devicetree/bindings/misc/fsl,qoriq-mc.txt | 196 ------------------
 .../bindings/misc/fsl,qoriq-mc.yaml           | 187 +++++++++++++++++
 .../ethernet/freescale/dpaa2/overview.rst     |   5 +-
 MAINTAINERS                                   |   4 +-
 4 files changed, 194 insertions(+), 198 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
 create mode 100644 Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml

Comments

Rob Herring (Arm) Nov. 21, 2020, 1:03 p.m. UTC | #1
On Thu, Nov 12, 2020 at 03:32:54PM +0200, Laurentiu Tudor wrote:
> From: Ionut-robert Aron <ionut-robert.aron@nxp.com>
> 
> Convert fsl,qoriq-mc to YAML in order to automate the verification
> process of dts files. In addition, update MAINTAINERS accordingly
> and, while at it, add some missing files.
> 
> Signed-off-by: Ionut-robert Aron <ionut-robert.aron@nxp.com>
> [laurentiu.tudor@nxp.com: update MINTAINERS, updates & fixes in schema]
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> ---
> Changes in v3:
>  - dropped duplicated "fsl,qoriq-mc-dpmac" schema and replaced with
>    reference to it
>  - fixed a dt_binding_check warning
> Changes in v2:
>  - fixed errors reported by yamllint
>  - dropped multiple unnecessary quotes
>  - used schema instead of text in description
>  - added constraints on dpmac reg property
> 
>  .../devicetree/bindings/misc/fsl,qoriq-mc.txt | 196 ------------------
>  .../bindings/misc/fsl,qoriq-mc.yaml           | 187 +++++++++++++++++
>  .../ethernet/freescale/dpaa2/overview.rst     |   5 +-
>  MAINTAINERS                                   |   4 +-
>  4 files changed, 194 insertions(+), 198 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
>  create mode 100644 Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml


> diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
> new file mode 100644
> index 000000000000..1dda2ad29717
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
> @@ -0,0 +1,187 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2020 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +maintainers:
> +  - Laurentiu Tudor <laurentiu.tudor@nxp.com>
> +
> +title: Freescale Management Complex
> +
> +description: |
> +  The Freescale Management Complex (fsl-mc) is a hardware resource
> +  manager that manages specialized hardware objects used in
> +  network-oriented packet processing applications. After the fsl-mc
> +  block is enabled, pools of hardware resources are available, such as
> +  queues, buffer pools, I/O interfaces. These resources are building
> +  blocks that can be used to create functional hardware objects/devices
> +  such as network interfaces, crypto accelerator instances, L2 switches,
> +  etc.
> +
> +  For an overview of the DPAA2 architecture and fsl-mc bus see:
> +  Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
> +
> +  As described in the above overview, all DPAA2 objects in a DPRC share the
> +  same hardware "isolation context" and a 10-bit value called an ICID
> +  (isolation context id) is expressed by the hardware to identify
> +  the requester.
> +
> +  The generic 'iommus' property is insufficient to describe the relationship
> +  between ICIDs and IOMMUs, so an iommu-map property is used to define
> +  the set of possible ICIDs under a root DPRC and how they map to
> +  an IOMMU.
> +
> +  For generic IOMMU bindings, see:
> +  Documentation/devicetree/bindings/iommu/iommu.txt.
> +
> +  For arm-smmu binding, see:
> +  Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
> +
> +  MC firmware binary images can be found here:
> +  https://github.com/NXP/qoriq-mc-binary
> +
> +properties:
> +  compatible:
> +    const: fsl,qoriq-mc
> +    description:
> +      A Freescale Management Complex compatible with this binding must have
> +      Block Revision Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
> +      the MC control register region.
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description: the command portal for this machine
> +      - description:
> +          MC control registers. This region may not be present in some
> +          scenarios, such as in the device tree presented to a virtual
> +          machine.
> +
> +  ranges:
> +    description: |
> +      A standard property. Defines the mapping between the child MC address
> +      space and the parent system address space.
> +
> +      The MC address space is defined by 3 components:
> +                <region type> <offset hi> <offset lo>
> +
> +      Valid values for region type are:
> +                  0x0 - MC portals
> +                  0x1 - QBMAN portals
> +
> +  '#address-cells':
> +    const: 3
> +
> +  '#size-cells':
> +    const: 1
> +
> +  dpmacs:
> +    type: object
> +    description:
> +      The fsl-mc node may optionally have dpmac sub-nodes that describe the
> +      relationship between the Ethernet MACs which belong to the MC and the
> +      Ethernet PHYs on the system board.
> +
> +    properties:
> +      '#address-cells':
> +        const: 1
> +
> +      '#size-cells':
> +        const: 0
> +
> +    patternProperties:
> +      "^(dpmac@[0-9a-f]+)|(ethernet@[0-9a-f]+)$":
> +        type: object
> +
> +        description:
> +          see Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml

Use $ref here.

> +
> +  iommu-map:
> +    description: |
> +      Maps an ICID to an IOMMU and associated iommu-specifier data.
> +
> +      The property is an arbitrary number of tuples of
> +      (icid-base, iommu, iommu-base, length).
> +
> +      Any ICID i in the interval [icid-base, icid-base + length) is
> +      associated with the listed IOMMU, with the iommu-specifier
> +      (i - icid-base + iommu-base).
> +
> +  msi-map:
> +    description: |
> +      Maps an ICID to a GIC ITS and associated msi-specifier data.
> +
> +      The property is an arbitrary number of tuples of
> +      (icid-base, gic-its, msi-base, length).
> +
> +      Any ICID in the interval [icid-base, icid-base + length) is
> +      associated with the listed GIC ITS, with the msi-specifier
> +      (i - icid-base + msi-base).
> +
> +  msi-parent:
> +    deprecated: true
> +    description:
> +      Points to the MSI controller node handling message interrupts for the MC.
> +
> +required:
> +  - compatible
> +  - reg
> +  - iommu-map
> +  - msi-map
> +  - ranges
> +  - '#address-cells'
> +  - '#size-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      smmu: iommu@5000000 {
> +        compatible = "arm,mmu-500";
> +        #global-interrupts = <1>;
> +        #iommu-cells = <1>;
> +        reg = <0 0x5000000 0 0x800000>;
> +        stream-match-mask = <0x7c00>;
> +        interrupts = <0 13 4>,
> +                     <0 146 4>, <0 147 4>,
> +                     <0 148 4>, <0 149 4>,
> +                     <0 150 4>, <0 151 4>,
> +                     <0 152 4>, <0 153 4>;
> +      };
> +
> +      fsl_mc: fsl-mc@80c000000 {
> +        compatible = "fsl,qoriq-mc";
> +        reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
> +        <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
> +        /* define map for ICIDs 23-64 */
> +        iommu-map = <23 &smmu 23 41>;
> +        /* define msi map for ICIDs 23-64 */
> +        msi-map = <23 &its 23 41>;
> +        #address-cells = <3>;
> +        #size-cells = <1>;
> +
> +        /*
> +        * Region type 0x0 - MC portals
> +        * Region type 0x1 - QBMAN portals
> +        */
> +        ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
> +                  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
> +
> +        dpmacs {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          ethernet@1 {
> +            compatible = "fsl,qoriq-mc-dpmac";
> +            reg = <1>;
> +            phy-handle = <&mdio0_phy0>;
> +          };
> +        };
> +      };
> +    };
> diff --git a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
> index d638b5a8aadd..b3261c5871cc 100644
> --- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
> +++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
> @@ -28,6 +28,9 @@ interfaces, an L2 switch, or accelerator instances.
>  The MC provides memory-mapped I/O command interfaces (MC portals)
>  which DPAA2 software drivers use to operate on DPAA2 objects.
>  
> +MC firmware binary images can be found here:
> +https://github.com/NXP/qoriq-mc-binary
> +
>  The diagram below shows an overview of the DPAA2 resource management
>  architecture::
>  
> @@ -338,7 +341,7 @@ Key functions include:
>    a bind of the root DPRC to the DPRC driver
>  
>  The binding for the MC-bus device-tree node can be consulted at
> -*Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt*.
> +*Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml*.
>  The sysfs bind/unbind interfaces for the MC-bus can be consulted at
>  *Documentation/ABI/testing/sysfs-bus-fsl-mc*.
>  
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b516bb34a8d5..e0ce6e2b663c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14409,9 +14409,11 @@ M:	Stuart Yoder <stuyoder@gmail.com>
>  M:	Laurentiu Tudor <laurentiu.tudor@nxp.com>
>  L:	linux-kernel@vger.kernel.org
>  S:	Maintained
> -F:	Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
> +F:	Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
> +F:	Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
>  F:	Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
>  F:	drivers/bus/fsl-mc/
> +F:	include/linux/fsl/mc.h
>  
>  QT1010 MEDIA DRIVER
>  M:	Antti Palosaari <crope@iki.fi>
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
deleted file mode 100644
index 7b486d4985dc..000000000000
--- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+++ /dev/null
@@ -1,196 +0,0 @@ 
-* Freescale Management Complex
-
-The Freescale Management Complex (fsl-mc) is a hardware resource
-manager that manages specialized hardware objects used in
-network-oriented packet processing applications. After the fsl-mc
-block is enabled, pools of hardware resources are available, such as
-queues, buffer pools, I/O interfaces. These resources are building
-blocks that can be used to create functional hardware objects/devices
-such as network interfaces, crypto accelerator instances, L2 switches,
-etc.
-
-For an overview of the DPAA2 architecture and fsl-mc bus see:
-Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
-
-As described in the above overview, all DPAA2 objects in a DPRC share the
-same hardware "isolation context" and a 10-bit value called an ICID
-(isolation context id) is expressed by the hardware to identify
-the requester.
-
-The generic 'iommus' property is insufficient to describe the relationship
-between ICIDs and IOMMUs, so an iommu-map property is used to define
-the set of possible ICIDs under a root DPRC and how they map to
-an IOMMU.
-
-For generic IOMMU bindings, see
-Documentation/devicetree/bindings/iommu/iommu.txt.
-
-For arm-smmu binding, see:
-Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
-
-The MSI writes are accompanied by sideband data which is derived from the ICID.
-The msi-map property is used to associate the devices with both the ITS
-controller and the sideband data which accompanies the writes.
-
-For generic MSI bindings, see
-Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-For GICv3 and GIC ITS bindings, see:
-Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml.
-
-Required properties:
-
-    - compatible
-        Value type: <string>
-        Definition: Must be "fsl,qoriq-mc".  A Freescale Management Complex
-                    compatible with this binding must have Block Revision
-                    Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
-                    the MC control register region.
-
-    - reg
-        Value type: <prop-encoded-array>
-        Definition: A standard property.  Specifies one or two regions
-                    defining the MC's registers:
-
-                       -the first region is the command portal for the
-                        this machine and must always be present
-
-                       -the second region is the MC control registers. This
-                        region may not be present in some scenarios, such
-                        as in the device tree presented to a virtual machine.
-
-    - ranges
-        Value type: <prop-encoded-array>
-        Definition: A standard property.  Defines the mapping between the child
-                    MC address space and the parent system address space.
-
-                    The MC address space is defined by 3 components:
-                       <region type> <offset hi> <offset lo>
-
-                    Valid values for region type are
-                       0x0 - MC portals
-                       0x1 - QBMAN portals
-
-    - #address-cells
-        Value type: <u32>
-        Definition: Must be 3.  (see definition in 'ranges' property)
-
-    - #size-cells
-        Value type: <u32>
-        Definition: Must be 1.
-
-Sub-nodes:
-
-        The fsl-mc node may optionally have dpmac sub-nodes that describe
-        the relationship between the Ethernet MACs which belong to the MC
-        and the Ethernet PHYs on the system board.
-
-        The dpmac nodes must be under a node named "dpmacs" which contains
-        the following properties:
-
-            - #address-cells
-              Value type: <u32>
-              Definition: Must be present if dpmac sub-nodes are defined and must
-                          have a value of 1.
-
-            - #size-cells
-              Value type: <u32>
-              Definition: Must be present if dpmac sub-nodes are defined and must
-                          have a value of 0.
-
-        These nodes must have the following properties:
-
-            - compatible
-              Value type: <string>
-              Definition: Must be "fsl,qoriq-mc-dpmac".
-
-            - reg
-              Value type: <prop-encoded-array>
-              Definition: Specifies the id of the dpmac.
-
-            - phy-handle
-              Value type: <phandle>
-              Definition: Specifies the phandle to the PHY device node associated
-                          with the this dpmac.
-Optional properties:
-
-- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier
-  data.
-
-  The property is an arbitrary number of tuples of
-  (icid-base,iommu,iommu-base,length).
-
-  Any ICID i in the interval [icid-base, icid-base + length) is
-  associated with the listed IOMMU, with the iommu-specifier
-  (i - icid-base + iommu-base).
-
-- msi-map: Maps an ICID to a GIC ITS and associated msi-specifier
-  data.
-
-  The property is an arbitrary number of tuples of
-  (icid-base,gic-its,msi-base,length).
-
-  Any ICID in the interval [icid-base, icid-base + length) is
-  associated with the listed GIC ITS, with the msi-specifier
-  (i - icid-base + msi-base).
-
-Deprecated properties:
-
-    - msi-parent
-        Value type: <phandle>
-        Definition: Describes the MSI controller node handling message
-                    interrupts for the MC. When there is no translation
-                    between the ICID and deviceID this property can be used
-                    to describe the MSI controller used by the devices on the
-                    mc-bus.
-                    The use of this property for mc-bus is deprecated. Please
-                    use msi-map.
-
-Example:
-
-        smmu: iommu@5000000 {
-               compatible = "arm,mmu-500";
-               #iommu-cells = <1>;
-               stream-match-mask = <0x7C00>;
-               ...
-        };
-
-        gic: interrupt-controller@6000000 {
-               compatible = "arm,gic-v3";
-               ...
-        }
-        its: gic-its@6020000 {
-               compatible = "arm,gic-v3-its";
-               msi-controller;
-               ...
-        };
-
-        fsl_mc: fsl-mc@80c000000 {
-                compatible = "fsl,qoriq-mc";
-                reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
-                      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-                /* define map for ICIDs 23-64 */
-                iommu-map = <23 &smmu 23 41>;
-                /* define msi map for ICIDs 23-64 */
-                msi-map = <23 &its 23 41>;
-                #address-cells = <3>;
-                #size-cells = <1>;
-
-                /*
-                 * Region type 0x0 - MC portals
-                 * Region type 0x1 - QBMAN portals
-                 */
-                ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
-                          0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
-
-                dpmacs {
-                    #address-cells = <1>;
-                    #size-cells = <0>;
-
-                    dpmac@1 {
-                        compatible = "fsl,qoriq-mc-dpmac";
-                        reg = <1>;
-                        phy-handle = <&mdio0_phy0>;
-                    }
-                }
-        };
diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
new file mode 100644
index 000000000000..1dda2ad29717
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
@@ -0,0 +1,187 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Laurentiu Tudor <laurentiu.tudor@nxp.com>
+
+title: Freescale Management Complex
+
+description: |
+  The Freescale Management Complex (fsl-mc) is a hardware resource
+  manager that manages specialized hardware objects used in
+  network-oriented packet processing applications. After the fsl-mc
+  block is enabled, pools of hardware resources are available, such as
+  queues, buffer pools, I/O interfaces. These resources are building
+  blocks that can be used to create functional hardware objects/devices
+  such as network interfaces, crypto accelerator instances, L2 switches,
+  etc.
+
+  For an overview of the DPAA2 architecture and fsl-mc bus see:
+  Documentation/networking/device_drivers/freescale/dpaa2/overview.rst
+
+  As described in the above overview, all DPAA2 objects in a DPRC share the
+  same hardware "isolation context" and a 10-bit value called an ICID
+  (isolation context id) is expressed by the hardware to identify
+  the requester.
+
+  The generic 'iommus' property is insufficient to describe the relationship
+  between ICIDs and IOMMUs, so an iommu-map property is used to define
+  the set of possible ICIDs under a root DPRC and how they map to
+  an IOMMU.
+
+  For generic IOMMU bindings, see:
+  Documentation/devicetree/bindings/iommu/iommu.txt.
+
+  For arm-smmu binding, see:
+  Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
+
+  MC firmware binary images can be found here:
+  https://github.com/NXP/qoriq-mc-binary
+
+properties:
+  compatible:
+    const: fsl,qoriq-mc
+    description:
+      A Freescale Management Complex compatible with this binding must have
+      Block Revision Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+      the MC control register region.
+
+  reg:
+    minItems: 1
+    items:
+      - description: the command portal for this machine
+      - description:
+          MC control registers. This region may not be present in some
+          scenarios, such as in the device tree presented to a virtual
+          machine.
+
+  ranges:
+    description: |
+      A standard property. Defines the mapping between the child MC address
+      space and the parent system address space.
+
+      The MC address space is defined by 3 components:
+                <region type> <offset hi> <offset lo>
+
+      Valid values for region type are:
+                  0x0 - MC portals
+                  0x1 - QBMAN portals
+
+  '#address-cells':
+    const: 3
+
+  '#size-cells':
+    const: 1
+
+  dpmacs:
+    type: object
+    description:
+      The fsl-mc node may optionally have dpmac sub-nodes that describe the
+      relationship between the Ethernet MACs which belong to the MC and the
+      Ethernet PHYs on the system board.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(dpmac@[0-9a-f]+)|(ethernet@[0-9a-f]+)$":
+        type: object
+
+        description:
+          see Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
+
+  iommu-map:
+    description: |
+      Maps an ICID to an IOMMU and associated iommu-specifier data.
+
+      The property is an arbitrary number of tuples of
+      (icid-base, iommu, iommu-base, length).
+
+      Any ICID i in the interval [icid-base, icid-base + length) is
+      associated with the listed IOMMU, with the iommu-specifier
+      (i - icid-base + iommu-base).
+
+  msi-map:
+    description: |
+      Maps an ICID to a GIC ITS and associated msi-specifier data.
+
+      The property is an arbitrary number of tuples of
+      (icid-base, gic-its, msi-base, length).
+
+      Any ICID in the interval [icid-base, icid-base + length) is
+      associated with the listed GIC ITS, with the msi-specifier
+      (i - icid-base + msi-base).
+
+  msi-parent:
+    deprecated: true
+    description:
+      Points to the MSI controller node handling message interrupts for the MC.
+
+required:
+  - compatible
+  - reg
+  - iommu-map
+  - msi-map
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      smmu: iommu@5000000 {
+        compatible = "arm,mmu-500";
+        #global-interrupts = <1>;
+        #iommu-cells = <1>;
+        reg = <0 0x5000000 0 0x800000>;
+        stream-match-mask = <0x7c00>;
+        interrupts = <0 13 4>,
+                     <0 146 4>, <0 147 4>,
+                     <0 148 4>, <0 149 4>,
+                     <0 150 4>, <0 151 4>,
+                     <0 152 4>, <0 153 4>;
+      };
+
+      fsl_mc: fsl-mc@80c000000 {
+        compatible = "fsl,qoriq-mc";
+        reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
+        <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+        /* define map for ICIDs 23-64 */
+        iommu-map = <23 &smmu 23 41>;
+        /* define msi map for ICIDs 23-64 */
+        msi-map = <23 &its 23 41>;
+        #address-cells = <3>;
+        #size-cells = <1>;
+
+        /*
+        * Region type 0x0 - MC portals
+        * Region type 0x1 - QBMAN portals
+        */
+        ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+                  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+        dpmacs {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          ethernet@1 {
+            compatible = "fsl,qoriq-mc-dpmac";
+            reg = <1>;
+            phy-handle = <&mdio0_phy0>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
index d638b5a8aadd..b3261c5871cc 100644
--- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
+++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
@@ -28,6 +28,9 @@  interfaces, an L2 switch, or accelerator instances.
 The MC provides memory-mapped I/O command interfaces (MC portals)
 which DPAA2 software drivers use to operate on DPAA2 objects.
 
+MC firmware binary images can be found here:
+https://github.com/NXP/qoriq-mc-binary
+
 The diagram below shows an overview of the DPAA2 resource management
 architecture::
 
@@ -338,7 +341,7 @@  Key functions include:
   a bind of the root DPRC to the DPRC driver
 
 The binding for the MC-bus device-tree node can be consulted at
-*Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt*.
+*Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml*.
 The sysfs bind/unbind interfaces for the MC-bus can be consulted at
 *Documentation/ABI/testing/sysfs-bus-fsl-mc*.
 
diff --git a/MAINTAINERS b/MAINTAINERS
index b516bb34a8d5..e0ce6e2b663c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14409,9 +14409,11 @@  M:	Stuart Yoder <stuyoder@gmail.com>
 M:	Laurentiu Tudor <laurentiu.tudor@nxp.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+F:	Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
+F:	Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml
 F:	Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
 F:	drivers/bus/fsl-mc/
+F:	include/linux/fsl/mc.h
 
 QT1010 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>